Pu（^7Fg）＋H2（X^1∑g^＋,0,0）的分子反应动力学

基于PuH_2分子基态(X~7A_1)的分析势能函数，用准经典的Monte-Carlo轨线法 对Pu(~7Fg)+H_2(X~1∑_g~+，0，0)的分子反应动力学过程进行了计算。结果表明 ：Pu(~7F_g)与H_2(X~1∑_g~+，0，0)碰撞是弹性碰撞。     

钯催化α-炔醇立体专一合成α-（Z）-氯亚甲基-β-内酯

首次在一氧化碳存在下，以仲丁醇和苯为混合反应溶剂，氯化钯和氯化铜为催 化体系催化α-炔醇羰基化，立体专一合成α-（Z）-氯亚甲基-β-内酯环。     

Synthesis of Polyacrylaminothiourea Chelating Fiber and Properties of Concentration and Separation of Trace Noble Metal Ions from Samples

A novel polyacrylaminothiourea chelating fiber was synthesized simply and rapidly from nitrilon (an acrylonitrile-based synthetic fiber), which was applied to preconcentrate and separate of trace amount of Au(Ⅲ）,Pt(Ⅳ）,Pd(Ⅳ） and Ir (Ⅳ） ions from solution of samples.The analyzed ions can be quantitatively concentrated by the fiber up to a flow rate of 20.0mL/min at pH2, and can also be desorbed with 15 mL of 4mol/L HCl 3% thiourea from the fiber column with recoveries of 96.5%-100%.The chelating fiber can be reused for ten times,the recoveries of these ions are still over 92%,and hundred to thousand times of excess of Fe(Ⅲ）,Al（Ⅲ）,Ca(Ⅱ），Mg（Ⅱ）,Ni(Ⅱ）,Mn（Ⅱ),Cu(Ⅱ），Zn(Ⅱ），and Cd(Ⅱ） cause no interference on the determination of the analyzed ions by inductively-coupled plasma atomic emission spectrometry (ICP-AES).The static saturation adsorption capacities of the fiber for the analytes are in the range of 1.15-2.80mmol/g.The relative standard deviations for the determination of 20.0ng/mL each of Au(Ⅲ）,Pt(Ⅳ）,Pd(Ⅳ）and Ir(Ⅳ） are in the range of 0.7%-3.0%.The recoveries for test from standard additions to real solution samples are between 96% and 100%.The concentration of each ion in powder sample detected by the method is in good agreement with the certified value.     

Fe(III)与2,3-二羟基苯磺酸钠配位反应的动力学研究

[H+]在0.01～0.70mol?L-1范围内,离子强度为1.00mol?L-1,[Fe(III)]>>[配体]、[H+]>>[配体]的条件下,研究了Fe(III)与2,3-二羟基苯磺酸钠(Tiron)的配位反应.发现当[H+]≤3.00×10-2mol?L-1时,[Fe(III)]2对反应速率有明显的贡献.求得了相关反应的动力学参数,从而揭示了FeOH2+和FeOH24+与Tiron配位的解离反应途径及FeOH32+的缔合反应机制,并提出了该配位反应的可能机理.     

Nanostructure Pt Electrode Obtained via Self-assembly of Nanoparticles on Conductive Oxide-coated Glass Substrate

Self-assembly of platinum nanoparticles were applied to fabrication of counter electrode for dye-sensitized solar cells on conductive oxide-coated glass substrate. The present Pt electrode exhibits high exchange current density of 220 mA/cm^2, which is comparable to those prepared by electrodeposition, magnetron sputtering or thermal decomposition of platinum chloride. After analysis by transmission electron microscopy (TEM), atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS), it was found that the catalyst was structurally characterized as nanosized platinum metal clusters and was continuously arranged on electrode surface. The present nanostructure electrode had high electrocatalytic activity for the reduction of iodine in organic solution.     

脱氢姜黄烯及其类似物的合成

利用苯乙酮及苯乙酮衍生物,经过傅-克乙酰化反应、偶联反应、Wittig烯化反应,合成了脱氢姜黄烯及其类似物.再经选择性催化氢化反应,可分别得到α-姜黄烯、黄根醇甲醚及姜黄氢醌甲醚.     

利用LB技术以寡聚DNA为模板构建CdS纳米结构

利用Langmuir-Blodgett技术制备了十八胺（ODA）／十聚腺嘌呤（oligo-A10)单分子膜，并以其为模板制备了不同形状的Cds纳米结构，结果表明以在低膜压下转移的寡聚DNA单层为模板可诱导生成线形的Cds纳米结构，而以在主膜压下转换的寡聚DNA单层膜板得到的是Cds的球形结构聚集体。     

A Short and Highly Stereoselective Synthesis of Cerebrosterol

Ｃｅｒｅｂｒｏｓｔｅｒｏｌ (2 4Ｓ ｈｙｄｒｏｘｙｃｈｏｌｅｓｔｅｒｏｌ,1)ｆｏｒｍｅｄｉｎｓｍａｌｌａｍｏｕｎｔｓｉｎｈｕｍａｎａｎｄａｎｉｍａｌｂｒａｉｎ1ｆｒｏｍｃｈｏｌｅｓ ｔｅｒｏｌｉｓｉｍｐｏｒｔａｎｔｆｏｒｃｈｏｌｅｓｔｅｒｏｌｈｏｍｅｏｓｔａｓｉｓｉｎｔｈｉｓｏｒｇａｎ .Ｔｈｅｅｘｃｅｓｓｃｈｏｌｅｓｔｅｒｏｌｉｓｃｏｎｖｅｒｔｅｄｉｎｔｏ 2 4Ｓ ｈｙｄｒｏｘｙ ｃｈｏｌｅｓｔｅｒｏｌｂｙａｕｎｉｑｕｅｂｒａｉｎ ｓｐｅｃｉｆｉｃ 2 4Ｓ ｈｙｄｒｏｘｙｌａｓｅ ,ｗｈｉｃｈｃｏｕｌｄｂｅｒ…     

Electronic and crystalline structure of Si/SiO2 interface modified by ArF excimer laser

The native oxide layers on Si(100) surface were irradiated under UHV conditions by an ArF excimer laser pulses with energy density varied between melting and evaporating thresholds. The resulting changes were studied by LEED, AES and UPS. The increase of the energy density up to evaporation threshold results in the recrystallisation of native oxide layer. The pulses with energy densities just above the evaporation threshold ablate the top layer leaving an ordered and atomicaly clean surface. The observed (1x1) surface reconstruction is probably stabilised by strains introduced during rapid melting and quenching of the topmost layers. The surface electronic structure is dominated by random satisfaction of dangling bonds swearing a well defined surface states observed on (2x1)Si(100) surface.