Effective dimensionality approach to the RKKY interaction in multilayer systems

We consider RKKY interaction in a quasi 2D system with nonparabolic dispersion. In our paper we calculate the RKKY range function assuming the in-layer confinement via effective dimensionality approach. We show, that indirect magnetic exchange in our system can be modelled by the effective spectral dimension which equals one.     

Two-Color Two-Photon Excitation of Fluorescence

Abstract— We report the observation of two-photon excitation of an organic fluorophore with two different wavelengths, a phenomenon we refer to as two-color two-photon (2C2P) excitation. Ultraviolet emission of p -Merphenyl at 340 nm was observed when the sample was illuminated with both 375 and 750 nm pulses from a picosecond dye laser. The emission of p -terphenyl was about 100-fold and more than 1000-fold less for illumination at only 375 or 750 nm, respectively. Observation of the 2C2P signal required temporal and spatial overlap of the 375 and 750 nm pulses. The amplitude of the signal depended on the polarization of each beam. 2C2P excitation can have applications in fluorescence microscopy and elsewhere when spatially localized excitation is desirable.     

Spectrophotometric determination of Fe(II) in milligram solid samples

The analytical procedure of determination of Fe(II) in the presence of Fe(III) in milligram samples is proposed. A solid sample is dissolved in hydrochloric acid in argon atmosphere. Subsequently, the pH-value of the solution is fixed and Fe(III) complexed by phosphoric buffer. At the next step Fe(II) is oxidized by -molybdosilicic acid. Finally, the intensity of colouring caused by the reduced form of the acid is measured at the wavelength 770 nm. The proper treatment of the sample during oxidation, and immediately before, is decisive for the accuracy of the analysis. The method was verified by means of the analysis of synthetic magnetite. The theoretical content of Fe(II) was 24.12%, the determined one was 24.02 ± 0.10%. The method was applied to the determination of the homogeneity of an iron catalyst for ammonia synthesis.     

Two confined phases of argon adsorbed inside open single walled carbon nanotubes

Isothermal adsorption of Ar on single walled carbon nanotubes (SWNTs) has been studied at 77 and 87 K. The SWNTs have been grown by laser vaporization of a graphite pellet containing 0.6% (atomic) Ni/Co catalyst. The nanotubes have been prepared for argon adsorption measurements by prolonged outgassing of as-grown material in a vacuum at room temperature (295 K), at elevated temperatures of up to 475 K, and by oxidization for 2 h in dry air at 470 K. Formation of two condensed phases of Ar in the interior of SWNTs has been observed at 77 K. The low-density phase is formed at 155(5) microTorr, while the high-density phase, at 120(5) microTorr. At 87 K, only a single phase has been observed at 185(5) microTorr. Condensation at both 77 and 87 K appears to be the first-order phase transition. Onset of the quasi-one-dimensional linear (one-channel) phase and the quasi-two-dimensional monolayer (six-channel) phase formation on the external surface of bundles has been observed at 77 K near 0.0017 and 0.8 Torr, respectively, and at 87 K near 0.018 and 5 Torr, respectively. Isosteric heats of adsorption for the one-channel phase, the first external layer, and the second external layer have been determined to be equal to 137, 107, and 70 meV, respectively.     

Sensitive spectrophotometric determination of gallium with eriochrome Cyanine R and cetyltrimethylammonium ions

Summary A new sensitive, spectrophotometric determination of gallium, based on the ternary gallium-Eriochrome Cyanine R-cetyltrimethylammonium system has been developed. At _max=588 nm the molar absorptivity is 1.20×10⁵l·mole^–1·cm^–1. The maximum absorbance is attained in 5 min in the presence of a 10-fold molar ratio of Eriochrome Cyanine R and an approx. 50-fold ratio of cetyltrimethylammonium bromide (to Ga). Citrate, EDTA and to a lesser extent tartrate, interfere. Interference by metals can be eliminated by a preliminary extraction of gallium with di-isopropyl ether from 7 M hydrochloric acid in the presence of ascorbic acid as reductant. The results for gallium (at a concentration level of 1×10^–4%) in aluminium metal and chloride indicate good precision and accuracy.

---

Empfindliche spektrophotometrische Bestimmung von Gallium mit Eriochromcyanin-R- und Cetyltrimethylammonium-Ionen

Zusammenfassung Ein neues, empfindliches spektrophotometrisches Verfahren zur Galliumbestimmung wurde ausgearbeitet. Es beruht auf der Verwendung des ternären Systems Gallium — EriochromcyaninR — Cetyltrimethylammonium. Bei _max=588 nm beträgt die molare Extinktion 1,20·10⁵ 1·Mol^–1·cm^–1. Die maximale Absorption wird innerhalb von 5 min bei Gegenwart der 10fachen molaren Menge EriochromcyaninR und der etwa 50fachen Menge Cetyltrimethylammoniumbromid erreicht. Citrat, ÄDTA und in geringerem Maß Tartrat stören. Störende Wirkung durch Metalle kann durch vorhergehende Extraktion des Galliums mit Diisopropyläther aus 7 M Salzsäure in Gegenwart von Askorbinsäure als Reduktionsmittel vermieden werden. Die Ergebnisse (im Konzentrationsbereich von 10^–4% Ga) in metallischem Aluminium und AICI₃ sind genau.

     

Preparation and characterization of electrodeposited Ni-Ru alloys: morphological and catalytic study

Nickel-ruthenium alloys with various compositions have been deposited by electrodeposition for the first time. Cyclic voltammetry and linear stripping voltammetry measurements show that codeposition of nickel with ruthenium is possible below the potential value of nickel reduction. High-quality alloys containing nickel and ruthenium can be plated at cathodic potentials ranging from − 0.5 to − 1.0 V vs SCE. Deposited coatings were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and atomic force microscopy (AFM). The diffractograms obtained show that an increase of nickel concentration in alloy will lead to a change in the phase composition and formation of NiRu (100) and (101) phases which is observed to be 78 mas.% Ni. SEM studies confirm the surface homogeneity and presence of small, regular grains. AFM observation allows the estimation of the real surface area of obtained alloys which increase with more negative electrodeposition potentials. Ni-Ru alloys were found to be highly electroactive in the water splitting process, which can be connected with the presence of the NiRu phase and a well-developed electroactive area.

Electrochemical deposition of Ni-Ru alloys with various composition and their catalytic activity in water splitting process

     

Synthesis of 8-Aza-2′-deoxyadenosine and related 7-Amino-3H-1,2,3-triazolo[4,5-d]pyrimidine 2′-Deoxyribofuranosides: Stereoselective glycosylation via the nucleobase anion

The synthesis of 8-aza-2′-deoxyadenosine ( = 7-amino-3H-1,2,3 triazolo[4,5-d]pyrimidine N³-(2′-deoxy-β-D-ribofuranoside); 1 ) as well as the N²- and N¹-(2′-deoxy-β-D-ribofuranosides) 2 and 3 is described. Glycosylation of the anion of 7-amino-3H-1,2,3-triazolo[4,5-d]pyrimidine ( 6 ) in DMF yielded three regioisomeric protected 2′-deoxy-β-D-ribofuranosides, i.e. the N³-, N²-, and N⁴-glycosylated isomers 7 (14%), 9 (11%), and 11 (3%), respectively, together with nearly equal amounts of their α-D-anomers 8 (13%), 10 (12%), and 12 (4%; Scheme 1). The reaction became Stereoselective for the β-D-nucleosides if the anion of 7-methoxy-3H-1,2,3-triazolo[4,5-d]pyrimidine ( 13 ) was glycosylated in MeCN: only the N³-, N², and N¹-(2′-deoxy-β-D-nucleosides) 14 (29%), 15 (32%), and 16 (23%), respectively, were formed (Scheme 2). NH₃ Treatment of the methoxynucleosides 14–16 afforded the aminonucleosides 1–3 . The anomeric configuration as well as the position of glycosylation were determined by combination of ¹³ C-NMR , ¹ H-NMR , and 1D-NOE difference spectroscopy. Compound 1 proved to be a substrate for adenosine deaminase, whereas the regioisomers 2 and 3 were not deaminated.