A study of morphological,thermal, rheological and barrier properties of Poly(3-hydroxybutyrate-Co-3-Hydroxyvalerate)/polylactide blends prepared by melt mixing

The paper aims to study blend properties of biodegradable polymers of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and polylactide (PLA) prepared by melt mixing. Blend compositions based on PHBV/PLA were investigated according to the following weight ratios, i.e. 100/0, 75/25, 50/50, 25/75 and 0/100 wt%. The study showed through scanning electron microscopy (SEM) that blends of PHBV/PLA are not miscible. This is consistent with differential scanning calorimetry (DSC) data which indicate the presence of two distinct glass transition temperatures (T_g) and melting temperatures (T_m), attributed to the neat polymers, over all the range of blend compositions. Water and oxygen barrier properties of PHBV/PLA blends are significantly improved with increasing the PHBV content in the blend. Further, morphological analyzes indicated that increasing the PHBV content in the polymer blends results in increasing the PLA crystallinity due to the finely dispersed PHBV crystals acting as a filler and a nucleating agent for PLA. On the other hand, the addition of PLA to the blend results in a very impressive increase in the complex viscosity of PHBV. Moreover, the rheological data showed that, excluding the specific behavior of the neat polymers at low frequencies, i.e. less than 0.1 Hz, the complex viscosity of PHBV/PLA blends fits the mixing law well.     

Model systems for flavoenzyme activity: relationships between cofactor structure, binding and redox properties

A series of flavins were synthesized bearing electron-withdrawing and -donating substituents. The electrochemical properties of these flavins in a nonpolar solvent were determined. The recognition of these flavins by a diamidopyridine (DAP) receptor and the effect this receptor has on flavin redox potential was also quantified. It was found that the DAP-flavin binding affinity and the reduction potentials (E(1/2)) for both the DAP-bound and unbound flavins correlated well with functions derived from linear free energy relationships (LFERs). These results provide insight and predictive capability for the interplay of electronics and redox state-specific interactions for both abiotic and enzymatic systems.     

Vibrational analysis of amino acids and short peptides in hydrated media. 3. Successive KL repeats induce highly stable beta-strands capable of forming non-H-bonded aggregates

Circular dichroism (CD) and Raman scattering were applied to the aqueous solution of minimalist LK peptides constructed with successive KL repeats leading to the following generic primary sequence: (KL)nK. Three peptides of this family, a 3-mer (n=1), a 9-mer (n=4), and a 15-mer (n=7), are analyzed in this report. Raman spectra of the 3-mer (KLK, a random chain) and its labile-hydrogen deuterated species yield a set of interesting information for analyzing longer peptides of this series. Although the CD spectrum of the 9-mer (KLKLKLKLK) reveals a signal traditionally assigned to a random structure, the corresponding Raman spectrum allows finding a mixture of conformations in solution, adopting predominantly beta-type structures. This fact proves the utility of Raman spectroscopy to eliminate eventual ambiguity concerning conformational assignments in peptides based only on the use of CD technique. Finally, the 15-mer (KLKLKLKLKLKLKLK) gives rise to CD and Raman spectra clearly assignable to a beta-type structure. On the basis of all the observed results on the 15-mer, we can confirm that this peptide may exist as isolated beta-strands at low concentration (sub-micromolar), flat-oriented at the air/water interface, whereas at high concentrations (millimolar), non-H-bonded immersible aggregates might be formed. A hypothetical model for these beta-strand aggregates could be proposed as stabilized by an interior hydrophobic core and a hydrophilic external face, formed by leucine and lysine side chains, respectively.     

A synthetic heparan sulfate-mimetic peptide conjugated to a mini CD4 displays very high anti- HIV-1 activity independently of coreceptor usage

The HIV-1 envelope gp120, which features both the virus receptor (CD4) and coreceptor (CCR5/CXCR4) binding sites, offers multiple sites for therapeutic intervention. However, the latter becomes exposed, thus vulnerable to inhibition, only transiently when the virus has already bound cellular CD4. To pierce this defense mechanism, we engineered a series of heparan sulfate mimicking tridecapeptides and showed that one of them target the gp120 coreceptor binding site with μM affinity. Covalently linked to a CD4-mimetic that binds to gp120 and renders the coreceptor binding domain available to be targeted, the conjugated tridecapeptide now displays nanomolar affinity for its target. Using solubilized coreceptors captured on top of sensorchip we show that it inhibits gp120 binding to both CCR5 and CXCR4 and in peripheral blood mononuclear cells broadly inhibits HIV-1 replication with an IC(50) of 1 nM.     

Some aspects of the flip-through phenomenon: A numerical study based on the desingularized technique

Flip-through is known as a rapidly focusing phenomenon at a wall leading to high loads without impact of liquid. In order to simulate numerically these highly nonlinear waves, the boundary value problem is formulated in potential theory without surface tension. A desingularized technique is used to compute the velocity potential. Conformal mappings of the fluid domain simplify the formulation of the solution.As shown by many contributors to the method of fundamental equations (another name to denote desingularized methods), the suitable desingularizing distance must be chosen with care. Here the criteria for choosing it follow from energy and mass conservation laws. This study shows what is the influence of an arbitrary additive constant to the velocity potential regarding conservation laws. Validation tests are performed on a focused wave. Recommendations are given regarding the choice of the desingularizing distance and the additive constant as well.In order to better control the initiation of flip-through, the simulations start from an initial free surface deformation in a rectangular tank, with or without varying bathymetry. The subsequent jet running along the wall, is described and the corresponding loads are discussed. In particular in the present configuration, it is shown that, along the wall, the maximum acceleration precedes the maximum of pressure contrary to the findings of previous studies. The sensitivity of the results with regard to the shape of the initial deformation and the local bathymetry is discussed.     

Self-optimizing charge-transfer energy phenomena in metallosupramolecular complexes by dynamic constitutional self-sorting

In this paper we report an extended series of 2,6-(iminoarene)pyridine-type ZnII complexes [(Lii)2Zn]II, which were surveyed for their ability to self-exchange both their ligands and their aromatic arms and to form different homoduplex and heteroduplex complexes in solution. The self-sorting of heteroduplex complexes is likely to be the result of geometric constraints. Whereas the imine-exchange process occurs quantitatively in 1:1 mixtures of [(Lii)2Zn]II complexes, the octahedral coordination process around the metal ion defines spatial-frustrated exchanges that involve the selective formation of heterocomplexes of two, by two different substituents; the bulkiest ones (pyrene in principle) specifically interact with the pseudoterpyridine core, sterically hindering the least bulky ones, which are intermolecularly stacked with similar ligands of neighboring molecules. Such a self-sorting process defined by the specific self-constitution of the ligands exchanging their aromatic substituents is self-optimized by a specific control over their spatial orientation around a metal center within the complex. They ultimately show an improved charge-transfer energy function by virtue of the dynamic amplification of self-optimized heteroduplex architectures. These systems therefore illustrate the convergence of the combinatorial self-sorting of the dynamic combinatorial libraries (DCLs) strategy and the constitutional self-optimized function.     

Controlling the Stepwise Closing of Identical DTE Photochromic Units with Electrochemical and Optical Stimuli

The full or stepwise controlled closing of identical photochromic dithienylethene units in the same molecule was addressed with a combination of electrochemical and optical stimuli in a trimetallic carbon-rich ruthenium complex.     

Understanding otolith biomineralization processes: new insights into microscale spatial distribution of organic and mineral fractions from Raman microspectrometry

It is generally accepted that the formation of otolith microstructures (L- and D-zones) and in particular the organic and mineral fractions vary on a daily basis. Raman microspectrometry provides a nondestructive technique that can be used to provide structural information on organic and mineral compounds. We applied it to thin otolith sections of hake in order to address the following issues: (1) the simultaneous characterization of variations in the organic and mineral fractions both in the core area and along successive otolith microstructures; (2) elucidation of significant differences between these fractions; (3) quantification of the effects of etching and staining protocols on otolith structures. The primordium appeared as a punctual area depicting higher luminescence and greater concentrations in organic compounds containing CH groups. Sulcus side showed similar composition suggesting that the contact of the otolith with the macula and its orientation in otosac occur rapidly (about 10 days). The characterization of L- and D-zones in the opaque zones indicated that both structures contained organic and aragonitic fractions with cyclic and synchronous variations. Contrary to the results obtained after EDTA etching, L-zones depicted greater concentrations in organic compounds containing CH groups, whereas D-zones appear richer in aragonite. This organic fraction seemed to be revealed by Mutvei’s staining and was affected by EDTA etching which suggests that it corresponds to the soluble fraction of organic matrix. Such results indicate that L- and D-zones differ in their respective organic constituents. Raman microspectrometry thus appears as a powerful technique to acquire quantitative information that is required for a better understanding of otolith biomineralization. Figure Raman microspectrometry is a powerful technique for studying otolith biomineralization     

Decarbonation and preservation method for the analysis of organic C and N contents and stable isotope ratios of low-carbonated suspended particulate material

The aim of this study was to determine a simple routine procedure to preserve, decarbonate and analyse low-carbonated filters of suspended particulate organic matter (POM) for particulate organic carbon and nitrogen content, and . Our goal was to analyse these four parameters from a single and entire filter of POM without altering the organic material.First, freezing (−20 °C) versus oven-drying (60 °C) were compared as the initial preservation step. Afterwards, non-acidified samples were compared to acid-treated samples using 0.12N HCl (diluted HCl rinsing at the end of the filtration) or 12N HCl (filters exposed to HCl fumes for 4 h in a dessicator). Regarding the preservation methods, our results indicate that freezing increases the uncertainty of measurements and, in combination with concentrated HCl treatment, leads to a loss of particulate nitrogen and an alteration of the signature. Consequently, we recommend drying to preserve filter samples. Regarding acid treatments, we found that (i) diluted HCl would not be sufficient to fully remove the carbonate from our samples, (ii) in contrast, a 4 h exposure of the filters to the HCl fumes was enough to remove all the inorganic carbon, and (iii) the concentrated HCl treatment did not alter the nitrogen measurements (only when drying without freezing is used to preserve the filters). Consequently, we propose that low-carbonated POM filters are preserved by drying and carbonates are removed by exposing the filters to HCl fumes (4 h) for the analysis of particulate organic C and N content and isotope ratios.