Approaches to improving critical current density of YBCO superconducting thick films deposited by electrophoresis

The irreversibility field (Hirr) of Y-based superconductor is much higher than that of Bi-based superconductor. Y-based superconductor is capable of maintaining stable electrical currents in high magnetic field and electric field, so it is a better suited mate-rial for electric-current applications. Commonly, the Y-based tapes comprise a YBCO thick film deposited on a flexible substrate, typically with an intermediate buffer layer, and an overcoat of noble metal. In this process, the interm…     

熔融织构生长强磁浮YBCO超导块材的取向和结构

采用熔融织构生长法结合顶部Ｓｍ１２３籽晶技术，成功地制备了直径为２０ｍｍ的ＹＢＣＯ超导块材。该块材具有极强的磁性能。用Ｘ射线θ／２θ扫描和Φ扫描分析其结构表明，样品在三维方向上具有很强的择优取向，其ｃ、ａ、ｂ轴方向分别与Ｓｍ１２３籽晶的ｃ、ａ、ｂ轴方向一致，并具有类似单晶的结构特点。     

Processing of Fluorescence Lifetime Image Using Modified Phasor Approach: Homo-FRET from the Acceptor

As the hardware of FLIM technique becomes mature, the most important criterion for FLIM application is the correct interpretation of its data. In this research, first of all, a more orthogonal phasor approach, called as Modified Phasor Approach (MPA), is put forward. It is a way to calculate the lifetime of the complex fluorescent process, and a rule to measure how much the fluorescence process deviates from single exponential decay. Secondly, MPA is used to analysis the time-resolved fluorescence processes of the transfected CHO-K1 Cell lines expressing adenosine receptor A₁R tagged by CYP and YFP, measured in the channel of the acceptor. The image of the fluorescence lifetime and the multiplication of the fluorescence lifetime and deviation from single exponential decay reveal the details of the Homo-FRET. In one word, MPA provides the physical meaning in its whole modified phasor space, and broadens the way for the application of the fluorescence lifetime imaging.     

Understanding the Initial Decomposition Pathways of the n‐Alkane/Nitroalkane Binary Mixture

Addition of nitroalkanes into n‐alkanes can lower the activation barriers of free‐radical production and accelerate the decomposition of n‐alkanes at relatively low temperatures. Four initial decomposition mechanisms of the n‐butane/nitroethane binary mixture were proposed for the promoting effect and considered theoretically at the B3LYP, BB1K, BMK, MPW1K, and M06‐2X levels with MG3S basis set. Energetics above was compared to high‐level CBS‐QB3 and G4 calculations. Calculated results confirm the feasibility of the four initial decomposition pathways: (I) the C? NO₂ bond rupture of nitroethane to produce ethyl and ·NO₂, (II) HONO elimination from nitroethane followed by decomposition to ·OH and ·NO, (III) rearrangement of nitroethane to ethyl nitrite which further dissociates into CH₃CH₂O· and ·NO, and (IV) direct hydrogen‐abstraction of nitroethane with n‐butane.     

New monolithic stir-cake-sorptive extraction for the determination of polar phenols by HPLC

A novel porous monolith has been prepared and used as a sorbent in stir-cake-sorptive extraction (SCSE). The monolithic material was prepared by in-situ copolymerization of allyl thiourea (AT) and divinylbenzene (DB) in the presence of dimethylformamide as a porogen solvent. To optimize the polymerization conditions, different monoliths with different ratios of functional monomer to porogenic solvent were prepared, and their extraction efficiency was investigated in detail. The monolith was characterized by elemental analysis, scanning electron microscopy, mercury intrusion porosimetry, and infrared spectroscopy. Analysis of polar phenols in environmental water samples by a combination of ATDB-SCSE and HPLC with diode-array detection was selected as a model for the practical application of the new sorbent. Several extraction conditions, including extraction and desorption time, pH, and ionic strength of the sample matrix were optimized. The results showed that the new monolith had high affinity for polar phenols and could be used to extract them effectively. Under the optimum conditions, low detection (S/N?=?3) and quantification (S/N?=?10) limits were achieved for the phenols, within the ranges 0.18–0.90 and 0.59–2.97 μg L^?1, respectively. The linearity of the method was good, and the method enabled simple, practical, and low-cost extraction of these analytes. The distribution coefficients between ATDB and water (K _ATDB/W) were calculated for the phenolic compounds and compared with K _O/W. Finally, the proposed method was successfully applied to the determination of the compounds in three environmental water samples, with acceptable recovery and satisfactory repeatability.

Reduction in the $$\mathbf {(4+1)}$$(4+1)-dimensional Fokas equation and their solutions

Nonlinear Dynamics - An integrable extension of the Kadomtsev–Petviashvili (KP) and Davey–Stewartson (DS) equations is investigated in this paper. We will refer to this integrable...     

Temperature Dependent In-Plane Anisotropic Magnetoresistance in HfTe_5 Thin Layers

We report the observation of in-plane anisotropic magnetoresistance and planar Hall effect in non-magnetic HfTe₅ thin layers.The observed anisotropic magnetoresistance as well as its sign is strongly dependent on the critical resistivity anomaly temperature T_p.Below T_p,the anisotropic magnetoresistance is negative with large negative magnetoresistance.When the in-plane magnetic field is perpendicular to the current,the negative longitudinal magnetoresistance reaches its maximum.The negative longitudinal magnetoresistance effect in HfTe₅ thin layers is dramatically different from that induced by the chiral anomaly as observed in Weyl and Dirac semimetals.One potential underlying origin may be attributed to the reduced spin scattering,which arises from the in-plane magnetic field driven coupling between the top and bottom surface states.Our findings provide valuable insights for the anisotropic magnetoresistance effect in topological electronic systems and the device potential of HfTe5 in spintronics and quantum sensing.     

Diffusion interaction and quantitative analysis of zinc dialkyldithiophosphate content in lube base oils in terahertz regime

We investigate the diffusion interaction and quantitative analysis of zinc dialkyldithiophosphate (ZDDP) mixed with lube base oil (LBO) at different concentrations using terahertz time-domain spectroscopy (THzTDS).When the concentration exceeds 6.78%,the characteristic absorption peaks exhibit significantly shift,and the absorption coefficient peak value is nonlinear against concentration.Moreover,the absorption coefficients of mixed samples follow the Beer’s law at a concentration below 6.78%.The quantitative analysis enables a strategy for monitoring the formulation of lubricating oil in real time.     

Frattini子群循环的有限$p$-群中的非交换集和极大Abel子群

设G是一个群,X是G的一个子集,若对于任意x,y∈X且x≠y,都有xy≠yx,则称X是G的一个非交换集.进一步,如果对于G中的任意其它非交换子集Y,都有|X|≥|Y|,那么称X是G的一个极大非交换集.文中确定了Frattini子群循环的有限p-群中极大非交换集和极大Abel子群的势.     

Preparation of stir cake sorptive extraction based on polymeric ionic liquid for the enrichment of benzimidazole anthelmintics in water,honey and milk samples

In this work, a new stir cake sorptive extraction (SCSE) using polymeric ionic liquid monolith as sorbent was prepared. The sorbent was obtained by in situ copolymerization of an ionic liquid, 1-allyl-3-methylimidazolium bis[(trifluoro methyl)sulfonyl]imide (AMII) and divinylbenzene (DB) in the presence of N,N-dimethylformamide. The influence of the content of ionic liquid and the porogen in the polymerization mixture on extraction performance was studied thoroughly. The physicochemical properties of the polymeric ionic liquid were characterized by infrared spectroscopy, elemental analysis, scanning electron microscopy and mercury intrusion porosimetry. The usefulness of SCSE–AMIIDB was demonstrated by the enrichment of trace benzimidazole anthelmintics. Several parameters affecting the extraction efficiency were investigated, and under the optimized conditions, a simple and effective method for the determination of trace benzimidazoles residues in water, milk and honey samples was established by coupling SCSE–AMIIDB with high performance liquid chromatography/diode array detection (SCSE–AMIIDB–HPLC/DAD). Results indicated that the limits of detection (S/N = 3) for target compounds were 0.020–0.072 μg L⁻¹, 0.035–0.10 μg L⁻¹ and 0.026–0.076 μg L⁻¹ in water, milk and honey samples, respectively. In addition, an acceptable reproducibility was achieved by evaluating the repeatability and intermediate precision with relative standard deviations (RSD) of less than 9% and 11%, respectively. Finally, the established AMII–SCSE–HPLC/DAD method was successfully applied for the determination of benzimidazoles residues in milk, honey and environmental water samples. Recoveries obtained for the determination of benzimidazole anthelmintics in spiking samples ranged from 70.2% to 117.6%, with RSD below 12% in all cases.