Finite-time boundedness of uncertain Hamiltonian systems via sliding mode control approach

Nonlinear Dynamics - This paper seeks to address the problem of finite-time stabilization for a class of uncertain Hamiltonian systems via sliding mode control approach. A novel sliding function in...     

Study on oxidation of polymers treated by high LET radiation

The oxidation of medical silicone rubber and segmented polyether urethane which were bombarded with 11.2 MeV Si⁺ or F⁺ at the dose of 5 × 10¹⁴ ions/cm² was studied. In XPS measurements, it was found that the oxygen concentration on the surface of the implanted polymeric membranes had been increasing in three months at least. ESR measurement showed that some free radicals existed in these membranes and their quantities decreased with time. Chemical analysis proved that peroxides were generated in the γ irradiated membranes. The reason for the increasing of oxygen concentration was that free radicals combined with oxygen in the air and produced peroxides on the membrane surface. Moreover, in order to demonstrate the radiation mechanism, low LET (γ rays) radiation of such polymeric membranes was carried out for comparison     

Palladium-catalyzed amination of aryl bromides with hindered N-alkyl-substituted anilines using a palladium(I) tri-tert-butylphosphine bromide dimer

An efficient palladium-catalyzed amination of aromatic bromides with hindered N-alkyl-substituted anilines is described, either using the combination of Pd(OAc)(2) and P(t-Bu)(3) or a palladium(I) tri-tert-butylphosphine bromide dimer, [Pd(mu-Br)(t-Bu(3)P)](2), a new, commercially available, and easily handled catalyst.     

Palladium‐catalyzed amination with benzophenone imine as a new,safe and practical alternative to nitration for the synthesis of 7‐amino‐2,1,3‐benzothiadiazoles

Palladium‐catalyzed amination of 7‐bromo‐4‐methyl‐2,1,3‐benzothiadiazole ( 7 ) with benzophenone imine as an ammonia equivalent is described as a new, safe and practical alternative to nitration for the synthesis of 7‐amino‐4‐methyl‐2,1,3‐benzothiadiazole ( 1 ) in high yield. This methodology was successfully scaled‐up in the pilot plant on 14.0‐kg scale of 7 and was also utilized for the synthesis of 7‐amino‐4,6‐dimethyl‐2,1,3‐ben‐zothiadiazole ( 12 ) by the amination of 7‐bromo‐4,6‐dimethyl‐2,1,3‐benzothiadiazole ( 10 ).     

Shape-controlled synthesis of metal nanostructures: the case of silver

The concept of shape-controlled synthesis is discussed by investigating the growth mechanisms for silver nanocubes, nanowires, and nanospheres produced through a polymer-mediated polyol process. Experimental parameters, such as the concentration of AgNO(3) (the precursor to silver), the molar ratio between poly(vinylpyrrolidone) (PVP, the capping agent) and AgNO(3), and the strength of chemical interaction between PVP and various crystallographic planes of silver, were found to determine the crystallinity of seeds (e.g., single crystal versus decahedral multiply twinned particles). In turn, the crystallinity of a seed and the extent of the PVP coverage on the seed were both instrumental in controlling the morphology of final product. The ability to generate silver nanostructures with well-defined morphologies provides a great opportunity to experimentally and systematically study the relationship between their properties and geometric shapes.     

活性位高度暴露的钴/氮/碳电催化剂的构建及氧还原性能研究

金属/氮/碳催化剂（M/N/C，M=Fe、Co等）是最有发展前景的非贵金属电催化剂之一，其性能依赖于催化剂表面的活性物种密度.通过常规的热解含氮前驱物与金属盐的方法制得的催化剂往往存在金属活性物种被包埋而不能有效利用的缺点.考虑到石墨相氮化碳（g-C₃N₄）富含类吡啶氮和亚纳米孔腔结构，将g-C₃N₄包覆在高导电性碳纳米笼（hCNC）表面，进而利用表层g-C₃N₄的配位和限域作用锚定大量Co²⁺离子，获得的Co/g-C₃N₄/hCNC复合物经热解后形成了活性位高度暴露、导电性好、孔结构丰富的Co/N/C催化剂.800℃热解得到的最优化催化剂在碱性介质中展现出优异氧还原活性，其起始电位（0.97 V）与商业Pt/C催化剂相当，且抗甲醇干扰性能和稳定性优异.此项研究提供了一种构建具有高度暴露活性位的M/N/C催化剂的有效策略.     

水合硝酸钕和18C6配合物的合成与性质研究

证实了18C6和水合硝酸钕在乙腈、丙酮和无水醇中均可形成Nd(NO_3)_3·18C6和[Nd(NO_3)_3]_4[18C6]_3两种类型的配合物如果按盐、醚摩尔比≤1:1配料,室温下充分反应,必然生成1:1型配合物;如果按盐、醚摩尔比≥4:3配料,室温下充分反应,必然生成4:3型配合物。两种配合物都是固液同成分化合物。两种配合物在上述三种溶剂中的溶解度都非常小。实现了两种配合物在溶液中的相互转变,讨论了转变的条件。提出了用红外光谱和热重曲线定性鉴别两种配合物的方法。     

Current Rectification in Temperature‐Responsive Single Nanopores

Herein we demonstrate a fully abiotic smart single‐nanopore device that rectifies ionic current in response to the temperature. The temperature‐responsive nanopore ionic rectifier can be switched between a rectifying state below 34 °C and a non‐rectifying state above 38 °C actuated by the phase transition of the poly(N‐isopropylacrylamide) [PNIPAM] brushes. On the rectifying state, the rectifying efficiency can be enhanced by the dehydration of the attached PNIPAM brushes below the LCST. When the PNIPAM brushes have sufficiently collapsed, the nanopore switches to the non‐rectifying state. The concept of the temperature‐responsive current rectification in chemically‐modified nanopores paves a new way for controlling the preferential direction of the ion transport in nanofluidics by modulating the temperature, which has the potential to build novel nanomachines with smart fluidic communication functions for future lab‐on‐chip devices.     

Disassembly of conjugated polyelectrolyte aggregates and their application for colorimetric detection of surfactants in water

A colorimetric strategy based on conjugated polyelectrolyte aggregates has been applied to determine and distinguish anionic, cationic and non-ionic surfactants.