Comparative study between two fabricated potentiometric sensors to enhance selectivity towards ferrous ions

Electroanalytical methods are highly selective for measuring electrical quantities including the charge, potential and current with their relation to chemical parameters. They are widely applied in various fields such as biochemical analysis, industrial quality control and environmental monitoring. They have many advantages over other techniques in that they are not time consuming and are specific for certain oxidation states of certain elements which give these techniques high selectivity and sensitivity features. This paper is based on two parts: the first part describes the fabrication of screen‐printed electrodes (SPEs) modified with methyl red as electroactive material, while second part describes the preparation and characterization of Fe(II)–methyl red complex using various spectroscopic tools, the complex being used for the construction of carbon paste electrodes (CPEs). The two proposed electrodes were successfully applied for the determination of Fe(II) in water and pharmaceutical (pharovit) samples. The electrodes under investigation show potentiometric response for Fe(II) in the concentration range 8.0 × 10^?7–1.0 × 10^?2 and 5.0 × 10^?7–1.0 × 10^?2 M at 25°C for SPE and CPE, respectively, and the electrode response is independent of pH in the range 1.5–7.0. These sensors show Nernstian slopes of 29.1 ± 0.2 and 29.7 ± 0.16 mV decade^?1 with detection limit values of 8.0 × 10^?7 and 5.0 × 10^?7 M for SPE and CPE, respectively. These electrodes show fast response time of 6 and 4 s and exhibit a lifetime of 100 and 30 days for SPE and CPE, respectively. The mechanism of chemical reaction between modifier and Fe(II) on the SPE surface was studied using infrared spectra, scanning electron microscopy and energy‐dispersive X‐ray analysis. The proposed potentiometric method was validated according to the IUPAC recommendations. The results obtained using the proposed sensors were comparable with those obtained with inductively coupled plasma analysis.     

Insights on the unsteadiness and stall effects on the characteristics and responses of continuous wing-based systems

Nonlinear Dynamics - The effects of the aerodynamic loads on continuous wing-based systems can be represented using a quasi-steady or a fully unsteady reduced-order modeling. Frequently, the...     

Utility of <Emphasis Type="Italic">π</Emphasis>-acceptor reagents for spectrophotometric determination of sulphonamide drugs via charge-transfer complex formation

A simple, sensitive and accurate spectrophotometric method for the determination of sulphonamides (sulphamethoxazole (SMZ), sulphaguanidine (SGD), sulphaquinoxaline sodium (SQX), sulphametrole (SMR), and sulphadimidine sodium (SDD)) has been developed. The charge-transfer reactions between sulphonamides as n-electron donors and 7,7,8,8-tetracyanoquinodimethane (TCNQ), 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ), and 2,5-dichloro-3,6-dihydroxy-1,4-benzoquinone (chloranilic acid, p-CLA) as π-acceptors resulting in highly coloured complexes were studied. Experimental conditions for these CT reactions were carefully optimised. Beer’s law is valid over the concentration ranges from 4–280 μg mL⁻¹, 4–260 μg mL⁻¹, 4–200 μg mL⁻¹, and 4–200 μg mL⁻¹ of SMZ, SGD, SQX, and SDD using DDQ reagent, respectively. While the calibration curves are linear in the concentration ranges from 4–180 μg mL⁻¹, 4–80 μg mL⁻¹, 4–60 μg mL⁻¹, 4–180 μg mL⁻¹, and 4–60 μg mL⁻¹ of SMZ, SGD, SQX, SMR, and SDD, respectively, using TCNQ reagent and from 4–380 μg mL⁻¹ and 4–300 μg mL⁻¹ of SQX and SDD, respectively, using p-CLA reagent, respectively. Different analytical parameters, namely molar absorptivity (ε), standard deviation, relative standard deviation, correlation coefficient, limit of detection, and limit of quantification, were calculated. The results obtained by the proposed methods are in good agreement with those obtained by the official method as indicated by the percent recovery values.     

Fabrication of chemically modified carbon paste electrode based on functionalized biopolymer for potentiometric determination of Al (III) ion in real water and pharmaceutical samples

Carbon paste electrode modified with Carboxymethyl chitosan-graft-poly(1-cyanoethanoyl-4-acryloyl-thiosemcarbazide)copolymers(CMCS-PCEATS) as ionophore was constructed for potentiometric determination of aluminum (III) and the chelation between the ionophore and the aluminum (III) ions at the electrode surface was characterized using SEM, EDX, and IR analysis. Thermal stability of the prepared electrode before and after chelation with the metal ion was investigated. The highest performance was obtained with the electrode modified with 10 mg of the prepared copolymers plasticized with TCP (electrode I). Under the optimized provision, the electrode I shows Nernstian slope of 19.9?±?0.36 mV decade^??1 over the concentration range from 1.0?×?10^??6 to 1.0?×?10^??2 mol L^??1 with a detection limit of 1.0?×?10^??6 mol L^??1 and pH ranges from 3 to 8. The paste is enough stable for 37 days without any detected change in the potential. The proposed method is more potent in determination of Al(III) in both real water and pharmaceutical samples potentiometrically. The results obtained agreed with those obtained with spectrophotometer and inductive coupled plasma (ICP).     

Aluminum(III)-Selective Screen Printed Sensor Based on Methyl Red

Russian Journal of Electrochemistry - Modified screen printed electrode (MSPE) with 2-[[4-(dimethyl amino) phenyl] diazenyl] benzoic acid (Methyl Red) was prepared for determination of aluminum...     

Antibacterial,DFT and molecular docking studies of metformin complex as active material for the fabrication of copper (II) selective potentiometric sensor

The prepared and characterized metformin ‐copper (II) complex was used as elecroactive material for modification of a new sensitive and selective modified carbon paste electrode (MCPE) for the potentiometric determination of copper (II) in water samples. The performance characteristics of MCPE were carried out. The electrode showed perfect potentiometric response for Cu (II) over concentration range of 1.0 × 10^?6 – 5.0 × 10^?2 mol L^?1 with a detection limit of 1.0 × 10^?6 mol L^?1 with divalent slope value 30.8 ± 0.92 mV decade^?1 over the pH range of 2–6 and exhibits fast response time of 9 s. Also, this electrode exhibited good selectivity towards Cu (II) ions with respect to other metal ions. The obtained results using the proposed electrode were in a good agreement with those obtained using the inductively coupled plasma (ICP) method.