Uptake and excretion of total inorganic arsenic by the freshwater alga Chlorella vulgaris

Arsenic-tolerant freshwater alga Chlorella vulgaris which had been collected from an arsenicpolluted environment were tested for uptake and excretion of inorganic arsenic. Approximately half the quantity of arsenic taken up by C. vulgaris was estimated to be adhered to the extraneous coat (10 wt %) of the cell. The remainder was bioaccumulated by the cell. Both adhered and accumulated arsenic concentrations increased with an increase in arsenic(V) concentration of the aqueous phase. Arsenic(V) accumulation was affected by the growth phse: arsenic was most actively accumulated when the cell was exposed to arsenic during the early exponential phase and then accumulation decreased with an increase in culture time exposed to arsenic. The alga grew well in the modified Detmer (MD) medium containing 1 mg As(III) dm^?3 and the growth curve was approximated by a ‘logistic equation’. Arsenic(III) was accumulated up to the second day of the culture time and arsenic(III) accumulation decreased with an increase in the culture time after that. Arsenic accumulation was also largely affected by various nutrients, especially by managanese, iron and phosphorus compounds. A modified MD medium with the three nutrients was proposed for the purpose of effective removal of arsenic from the aqueous phase. Using radioactive arsenate (Na₂H⁷⁴AsO₄), the arsenic accumulated was found to be readily excreted under conditions which were unfavourable for the multiplication of C. vulgaris.     

Strain analysis of Si by FEM and energy-filtering CBED.

Lattice strains around a platelet oxygen precipitate in Si wafer is studied by energy filtering convergent-beam electron diffraction (CBED) and calculations based on the finite element method (FEM). Local lattice strains are measured from CBD patterns obtained with a probe size less than 2 nm in a specimen thicker than 450 nm. Strains measured are compressive along a direction normal to a plate of the precipitation and tensile along a direction parallel to the plate. Two-dimensional stress fields near the precipitate are obtained with FEM computer analyses by fitting the measured strains. It appears that shear stresses are concentrated at the end of the precipitate edge and the maximum shear stress at an interface between the precipitate and the Si-matrix is 1.9 GPa. It is demonstrated that a combination of the energy filtering CBED and FEM is very useful for the study of local strains near interfaces in semiconductor devices, in particular for the study of stress fields that are too steep for application of the conventional CBED technique.     

Synthesis of poly(vinylene-arsine)s: alternating radical copolymerization of arsenic atomic biradical equivalent and phenylacetylene

Novel organoarsenic polymers, poly(vinylene-arsine)s, were synthesized by a free-radical alternating copolymerization of phenylacetylene with cyclooligoarsines as an atomic biradical equivalent. The polymerization between pentamethylpentacycloarsine (1a) or hexaphenylhexacycloarsine (1b) with phenylacetylene (2) in the presence of a catalytic amount of AIBN (in benzene; refluxing; for 12 h) gave the corresponding poly(vinylene-arsine)s. The obtained polymers were soluble in common organic solvents such as THF, chloroform, and benzene. From gel permeation chromatographic analysis (chloroform, PSt standards), the number-average molecular weights of the polymers from 1a and 1b were found to be 11500 and 3900, respectively. The structures of the polymers were supported by 1H and 13C NMR spectroscopies. The corresponding polymer was also obtained by irradiation of a benzene solution of 1a and 2 with xenon lamp at room temperature. After the polymer from 1a was stirred vigorously with 30% H2O2, the 1H NMR spectrum of the polymer showed the methyl proton that was assigned to As(III)-Me, suggesting the insensitivity of the trivalent state arsenic in the main chain to the oxidation. The structures and the molecular weights of the polymers were insensitive to the feed ratio of the monomers. This result indicates that the addition of the arsenic radical to phenylacetylene was a rate-determining step in the copolymerization.     

Decomposition of Co2TiO4 spinel below 1000 K

Co₂TiO₄ spinel was found to decompose to the mixture of CoTiO₃ ilmenite and Co₃O₄ spinel below 1000 K. The decomposition rate was the larger for the sample ground for the longer period. It showed a maximum around 870–920 K which seemed to appear from the balance between the rate increase by diffusion and the decrease of nucleation probability with temperature. The thermodynamical consideration supported the experimental results.     

Stereochemistry in cationic polymerization of alkenyl ethers. V. Stereochemistry of acetal additions as model reactions for the polymerization of alkenyl ethers

Acetal additions to β-substituted vinyl ethers having a variety of substituents (alkenyl ethers) were stereochemically investigated as model reactions for their cationic polymerization. The reactions catalyzed by BF₃O(C₂H₅)₂ in CH₂Cl₂ at O°C gave 1:1 adducts, the steric structure of which was determined by means of ¹³C-NMR spectroscopy. trans-Alkenyl ethers always gave adducts with a single structure stereospecifically, indicating that the intermediate carbocation attacks a trans-alkenyl ether from a definite direction independent of the bulkiness of substituents. On the other hand, cis-alkenyl ethers formed adducts with two steric structures, and the direction of cation addition was found to depend on the bulkiness of the alkoxy group involved. The above trends were in agreement with the results for poly(alkenyl ether)s and allowed detailed discussion of the stereochemistry of the propagation processes in alkenyl ether polymerizations.     

Preparation of '2,('3)-O-Acyl-pCpA derivatives as substrates for T4 RNA ligase-mediated “chemical aminoacylation”

The synthesis of '2('3)-O-(amino)acyl-pCpA derivatives is described and the products are characterized chemically and as substrates for T4 RNA ligase in the presence of E. coli tRNA ^phe-C_OH. The modified (N-acetylammo)acyl-tRNA's so derived are characterized by their chromatographic and biochemical properties, and by their ability to act as P-site tRNA donors in the peptidyltransferase reaction.     

Direct and stepwise intercalation of alkylalcohols intoα-zirconium phosphate

Intercalation of alkylalcohols into -zirconium phosphate was investigated at 25°C and/or under reflux.n-Alcohols having two to five carbons and 2-propanol were taken up at 25°C. These alcohols, andn-hexanol and heptanol, also intercalated under reflux.n-Alcohols having eight to eighteen carbon atoms intercalated when a stepwise method was employed. 2-Butanol and tertiary amylalcohols intercalated under reflux using a butanol intercalate as a starting material. Ethanol-to-butanol intercalates were unstable at room temperature, losing alcohols and changing to -zirconium phosphate. The particle size of the -zirconium phosphate did not affect the intercalation of alcohols.     

Optically active 2-p-tolylsulfinylacrylate a novel chiral dienophile which exhibits high reactivity and diastereoselectivity

The Diels-Alder reaction of a novel chiral dienophile, alkyl ($\text{S}$)-2-$\text{p}$-tolylsulfinylacrylates 1 with anthracene and cyclopentadiene showed high diastereoselectivity under the chelation controlled condition.     

Synthesis of fluoride garnets {Na3}[M3+2](Li3)F12 (M = Al,Cr, and Fe) from aqueous solution and their properties

The garnet-type fluorides, Na₃M₂Li₃F₁₂ (M = Al, Cr, and Fe) were synthesized as the coprecipitates of ～1 to 10 μm powders from HF solutions. The garnet structures were always obtained under acidic conditions. The incorporation of water molecules into the structure of the Cr and Fe garnets was observed. After heat treatment at 300°C, very small unknown peaks were observed in the X-ray powder pattern in addition to the garnet phase which had a slightly smaller value of the lattice constant than that of hydrous garnets. From the measurement of magnetic properties and Mössbauer effects, the Fe and Cr garnets were found to be paramagnetic with both ions in the trivalent state. Presentation of infrared spectra of the garnets is also included.     

Synthesis of Optically Active P‐Chiral and Optically Inactive Oligophosphines

A series of optically active P‐chiral oligophosphines (S,R,R,S)‐ 2 , (S,R,S,S,R,S)‐ 3 , (S,R,S,R,R,S,R,S)‐ 4 , and (S,R,S,R,S,R,R,S,R,S,R,S)‐ 5 with four, six, eight, and 12 chiral phosphorus atoms, respectively, were successfully synthesized by a step‐by‐step oxidative‐coupling reaction from (S,S)‐ 1 . The corresponding optically inactive oligophosphines 1′ – 5′ were also prepared. Their properties were characterized by DSC, XRD, and optical‐rotation analyses. While optically active bisphosphine (S,S)‐ 1 and tetraphosphine (S,R,R,S)‐ 2 behaved as small molecules, octaphosphine (S,R,S,R,R,S,R,S)‐ 4 and dodecaphosphine (S,R,S,R,S,R,R,S,R,S,R,S)‐ 5 exhibited the features of a polymer. Furthermore, DSC and XRD analyses showed that hexaphosphine (S,R,S,S,R,S)‐ 3 is an intermediate between a small molecule and a polymer. Comparison of optically active oligophosphines 1 – 5 with the corresponding optically inactive oligophosphines 1′ – 5′ revealed that the optically active phosphines have higher crystallinity than the optically inactive counterparts. It is considered that the properties of oligophosphines depend on the enantiomeric purity as well as the oligomer chain length.