甲苯甲醇侧链烷基化反应中沸石催化剂酸碱中心的作用Ⅱ．改性的X型和双组分改性的X／ZSM－5双沸石催化剂

制备了改性的ｘ型和ｘ／ＺＳＭ－５型沸石催化剂，并对其进行了评价和ＴＰＤ、ＥＳＣＡ表征，将实验结果进行了关联。结果表明，采用ＫＯＨ，Ｈ＿３ＢＯ＿３和碱土金属化合物等作为改性剂，可以调变沸石催化剂的酸碱中心，其中碱酸密度比为０．５３９的ＫＸ（Ｂ＿３）·ＫＺＳＭ－５（Ｃａ）催化剂，能显著提高甲苯、甲醇侧链烷基化制取苯乙烯反应的选择性和收率。井根据对实验结果的分析，初步探讨了甲苯、甲醇侧链烷基化反应的机理。     

甲苯甲醇侧链烷基化反应中沸石催化剂酸碱中心的作用Ⅰ．改性的X型、X／ZSM－5型和KX型沸石催化剂

甲苯甲醇侧链烷基化反应中沸石催化剂酸碱中心的作用Ⅰ．改性的Ｘ型、Ｘ／ＺＳＭ－５型和ＫＸ型沸石催化剂李永光，畅晋英，王建平（太原工业大学化工系，太原０３００２４）关链词沸石，侧链烷基化，甲苯，甲醇甲苯甲醇烷基化反应有两种方式：在苯环上烷基化生成二甲苯；...     

Hydroxyl radical formation upon dark oxidation of reduced iron minerals: Effects of iron species and environmental factors

Dark formation of hydroxyl radical upon oxidation of reduced iron minerals plays an important role in the degradation and transformation of organic and inorganic pollutants. Herein, we compared the hydroxyl radical formation from various reduced iron minerals at different redox conditions. OH production was generally observed from the oxidation of reduced iron minerals, following the order: mackinawite (FeS) > reduced nontronite (iron-bearing smectite clay) > pyrite (FeS₂) > siderite (FeCO₃). Structural Fe²⁺ and dissolved O₂ play critical roles in OH production from reduced iron minerals. OH production increases with decreasing pH, and Cl^? has little effect on this process. More importantly, dissolved organic matter significantly enhances OH production, especially under O₂ purging, highlighting the importance of this process in ambient environments. This sunlight-independent pathway in which OH forms during oxidation of reduced iron minerals is helpful for understanding the degradation and transformation of various inorganic and organic pollutants in the redox-fluctuation environments.     

Optimization of Pretreatment Method for Alkylmercuries Speciation in Coal by High‐Performance Liquid Chromatography Coupled with UV‐Digestion Cold Vapor Atomic Fluorescence Spectrometry

Abstract

Exhaustive extraction of analytes in their original chemical forms from samples with complex matrices is a pivotal step for speciation analysis. Herein we propose a pretreatment method for extracting and preconcentrating methylmercury and ethylmercury from coal samples by using KBr–H₂SO₄/CuSO₄–C₆H₅CH₃–Na₂S₂O₃ system. The extraction conditions, including the volume of the organic phase and the extraction time, were optimized in detail. Speciation analysis of alkylmercuries was carried out by high‐performance liquid chromatography online coupled with UV‐digestion and cold vapor atomic fluorescence spectrometry. The detection limits were 0.6 ng mL^?1 for methylmercury and 1 ng mL^?1 for ethylmercury, respectively. The recoveries of methylmercury and ethylmercury spiked in a sample were 84% and 82%, respectively. The method was applied successfully to analysis of alkylmercuries in four coal samples collected from northeast China.     

Single- and multi-shot laser-induced damages of Ta_2O_5/SiO_2 dielectric mirrors at 1064 nm

Ta2O5/SiO2 dielectric mirrors deposited by ion beam sputtering (IBS) are studied. The multi-shot laserinduced damage threshold (LIDT) and its dependence on the number of shots are investigated, after which we find that the multi-shot LIDT is lower than that of single-shot. The accumulation effects of defects play an important role in the multi-shot laser damage. A simple model, which includes the conduction band electron production vsa multiphoton and impact ionizations, is presented to explain the experimental phenomena.     

Modeling the effects of cohesive energy for single particle on the material removal in chemical mechanical polishing at atomic scale

This paper proposes a novel mathematical model for chemical mechanical polishing (CMP) based on interface solid physical and chemical theory in addition to energy equilibrium knowledge. And the effects of oxidation concentration and particle size on the material removal in CMP are investigated. It is shown that the mechanical energy and removal cohesive energy couple with the particle size, and being a cause of the non-linear size-removal rate relation. Furthermore, it also shows a nonlinear dependence of removal rate on removal cohesive energy. The model predictions are in good qualitative agreement with the published experimental data. The current study provides an important starting point for delineating the micro-removal mechanism in the CMP process at atomic scale.     

Thermo‐ and Acid‐Responsive Photochromic Spironaphthoxazine‐Containing Organogelators

A series of photochromic spironaphthoxazine derivatives has been designed, synthesized, and characterized by using ¹H NMR spectroscopy, FAB mass spectrometry, and elemental analysis. Their photophysical and photochromic behavior have been investigated. Two of the compounds (G¹²‐en‐SA‐SO and G¹⁶‐en‐SA‐SO) have been shown to be capable of forming stable thermoreversible organogels in organic solvents, tested by the “stable‐to‐inversion of a test tube” method. Addition of p‐toluenesulfonic acid was found to induce the formation of stable organogels at concentrations below that of the critical gelation concentration (c.g.c.), with a concomitant change in color from colorless to purple. Transmission electron microscopy and scanning electron microscopy of the xerogels showed typical fibrous structures in the micrometer scale. The activation parameters for the bleaching reaction of G⁸‐en‐SA‐SO in the solution state and G¹⁶‐en‐SA‐SO in the gel state have been determined in ethanol through kinetic studies at various temperatures. The results showed that the rate of the bleaching reaction in the gel state was much slower than that in the solution state.     

Accumulation effect of SiO_2 protective layer on multi-shot laser-induced damage in high-reflectivity HfO_2/SiO_2 coatings

The accumulation effects in high-reflectivity(HR) HfO2/SiO2 coatings under laser irradiation are investigated.The HR HfO2/SiO2 coatings are prepared by electron beam evaporation at 1 064 nm.The laser-induced damage threshold(LIDT) are measured at 1 064 nm and at a pulse duration of 12 ns,in 1-on-1 and S-on-1 modes.Multi-shot LIDT is lower than single-shot LIDT.The laser-induced and native defects play an important role in the multi-shot mode.A correlative theory model based on critical conduction band electron density is constructed to elucidate the experimental phenomena.     

Novel organotin‐containing shell‐cross‐linked knedel and core‐cross‐linked knedel: Synthesis and application in catalysis

A series of novel organotin‐containing core‐cross‐linked knedels and shell‐cross‐linked knedels were first synthesized facilely from poly(styrene)‐b‐poly(acrylate acid) nanoparticles in different selective solvents [Tetrahydrofuran (THF)/H₂O or THF/n‐octane] by using organotin compound 1,3‐dichloro‐tetra‐n‐butyl‐distannoxane as a new cross‐linker. The formation of the 1‐chloro‐3‐carboxylato‐tetra‐n‐butyl‐distannoxane layer in our cross‐linking reaction was supported by Fourier transform infrared (FT‐IR) and inductive coupled plasma emission spectrometer (ICP) analysis of the resulting shell‐cross‐linked knedels and core‐cross‐linked knedels. Transmission electron microscopy (TEM) study showed the spherical morphology and the size of the core‐cross‐linked knedels and shell‐cross‐linked knedel. Especially, the layer structure of the core‐cross‐linked knedels was clearly displayed in TEM image. The increase of extent of cross‐linking lead to the increasing of diameter for the shell‐cross‐linked knedels, whereas there was no significant effect on the core‐cross‐linked knedels. Dynamic light scattering (DLS) measurements gave hydrodynamic diameters of the core‐cross‐linked knedels that were in agreement with the TEM diameters. Moreover, the wall thickness of the shell layer of the core‐cross‐linked knedels could be easily modified by varying the block copolymer composition. Notably, the organotin‐containing core‐cross‐linked knedel exhibited highly efficient catalytic activity for the aqueous esterification reaction under nearly neutral conditions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

基于动力系统的线性不等式组的解法

本文提出了一种新的求解线性不等式组可行解的方法-基于动力系统的方法．假设线性不等式组的可行域为非空,在可行域的相对内域上建立一个非线性关系表达式,进而得到一个结构简单的动力系统模型．同时,定义了穿越方向。文章最后的数值实验结果表明此算法是有效的．