Closed tube sample introduction for gas chromatography-ion mobility spectrometry analysis of water contaminated with a chemical warfare agent surrogate compound

Ion mobility spectrometry (IMS) is a proven technology for detection of vapor phase chemical warfare agents. The technology is suitable for field portable instrumentation due to its small size, high sensitivity, speed of analysis, and low power consumption. However, it suffers from a limited dynamic range and potential difficulties in identifying compounds in complex matrices. The use of gas chromatography (GC) coupled to IMS can overcome the difficulty of chemical identification in mixtures by separating the sample into individual components before detection. Using this approach, IMS technology has previously been adapted to detect biological aerosols using an open tube pyrolyzer and a short GC column (Py-GC-IMS). The open sample introduction tube of a Py-GC-IMS instrument would be a convenient configuration to accept aerosol particulates, and while viewed as needed for aerosol trapping, is not optimal for liquid chemical analyses. To examine the usefulness of an existing Py-GC-IMS system for analysis of chemicals in water, an existing open-port sample interface was replaced with a septum-equipped closed tube injector to contain analyte vapors resulting from liquid injection. Tributylphosphate (TBP) was used as a surrogate chemical warfare agent, and aqueous injections into both closed and open tube assemblies were performed. Sample introduction into the closed tube inlet was also accomplished using solid phase microextraction (SPME) preconcentration. The limit of detection for TBP using an open tube, closed tube, and closed tube configuration with SPME sample introduction was 0.980, 0.196, and 0.0098 mg/L, respectively.     

Electrochemical parameters of aluminum oxide film in situ during anodization of aluminum by white light-optical interferometry

Optical Review - Both Fabry–Pérot interferometry and the DC electrochemical method have been simultaneously used for the first time to measure in situ the anodic current density (J) of...     

Electrochemical Monitoring of Methotrexate Anticancer Drug in Human Blood Serum by Using in situ Solvothermal Synthesized Fe3O4/ITO Electrode

Here, we reported on a one‐step fabrication of magnetite Fe₃O₄ nanoparticles/indium tin oxide (ITO) electrode based on the direct growing of Fe₃O₄ nanoparticles on the ITO surface by using a solvothermal process. The modified electrode was used as electrochemical methotrexate (MTX) biosensor with high sensitivity based on cyclic voltammetry and square wave voltammetry techniques. The results demonstrated a linear relationship between the MTX concentration and its oxidation current peak over a wide range from 10^?5 to 10^?14 mole/L with a limit of detection of 0.4×10^?15 M based on the square wave voltammetry (SWV) technique. In addition, Fe₃O₄/ITO electrode showed a good capability for measuring very low concentrations of MTX drug dissolved in human serum solution. Also, Fe₃O₄/ITO electrode was used for detecting MTX in blood serum samples collected from patients after their treatment with MTX. The prepared electrode showed the higher sensitivity that higher than the Viva‐E instrument, which opens the door for developing a cheap, simple and higher sensitive MTX sensor.     

Effect of post-synthetic processing conditions on structural variations and applications of bacterial cellulose

Physicochemical properties of materials can be amended by altering their physical structure through different processing conditions. The present study was conducted to investigate the post-synthesis structural variations and physico-mechanical properties of bacterial cellulose (BC) sheets prepared using different drying methods. Wet BC sheets of the same origin were freeze dried (BC-FD), dried at room temperature (25 °C) (BC-DRT), and dried at elevated temperature (50 °C) (BC-DHT). FE-SEM micrographs revealed that BC-DRT and BC-DHT had a more tightly packed and compact structure than the loosely held fibrils of BC-FD. XRD analysis revealed the relative crystallinity of the BC sample to be 64.60, 59.16, and 47.20 % for BC-DHT, BC-DRT and BC-FD, respectively. The water holding capacity (WHC) of the BC-FD was higher than that of the other two samples. Four consecutive drying and rewetting cycles demonstrated that the WHC of all samples decreased with each cycle. The WHC of BC-DRT and BC-DHT was reduced to almost 0 after the first drying cycle, but the BC-FD samples were able to regain some of their WHC. The tensile strength and elongation modulus were in the order of BC-DHT > BC-DRT > BC-FD. Overall, the results of this study revealed that the post-synthetic processing conditions had a strong effect on the structure and physico-mechanical properties of BC.     

Fiber-optic beam shaper based on multimode interference

A new method of fiber-optic based beam shaping is investigated both numerically and experimentally. A cylindrically symmetric method of lines (MoLs) is developed to simulate the device. The device is fabricated by fusion splicing a predetermined length of multimode fiber (MMF) to a single-mode fiber. The multimode interference (MMI) effects create ring-shaped field profiles at certain positions inside the MMF. The shaped beam can be used in medical applications requiring particular irradiation patterns.     

Investigating microcrystalline cellulose crystallinity using Raman spectroscopy

Cellulose - Microcrystalline cellulose (MCC) is a semi-crystalline material with inherent variable crystallinity due to raw material source and variable manufacturing conditions. MCC crystallinity...     

Morphology and physical properties of poly(ethylene oxide) loaded graphene nanocomposites prepared by two different techniques

Organic–inorganic hybrids are artificially created structures presenting novel properties not exhibited by either of the component materials alone. In this contribution one addresses processing, morphology and properties of polymer nanocomposites reinforced graphene. First, synthesis routes to graphite oxide (GO) and foliated graphene sheets (FGS) are illustrated. Physical characterization of these graphene sheets were conducted using atomic force microscopy and X-ray diffraction techniques. Processing, structure and properties of graphene/poly(ethylene oxide) (PEO) nanocomposites are discussed. FGS was dispersed into PEO via two different composite manufacturing techniques: melt compounding and solvent mixing. Morphology of dispersed graphene and properties from different blending routes are compared. TEM showed that graphene distributed parallel to the composite surface using solvent method, while distributed randomly in melt blended method. Optical measurements indicated that the transparency of PEO/graphene prepared by solvent method is higher than that of melt blended method in the visible region. Electrical conductivity measurements are employed to evaluate threshold concentration for rigidity and connectivity percolation. The percolation concentration of the composites prepared by solvent method is less than those of melt blended method. The mechanical performance of the composites prepared by solvent method is higher than melt blended. Halpin–Tsai model has been used to confirm the distribution of the graphene into PEO by the two different processing techniques.     

A novel method for elimination of the gold-islands formed in the self-assembled monolayers of benzeneselenol on Au(1 1 1) surface

Molecular ordering of benzeneselenol (BSe) self-assembled monolayers (SAMs) on Au(1 1 1) substrates have been investigated by scanning tunnelling microscopy (STM) [1]. After short immersion time (10 min), elevated islands with height of 2.4 Å were found to cover the entire gold surface. On and among the islands, the STM results exhibited the formation of a highly ordered phase (α-phase) by BSe species. In the present study, a novel method is presented to completely eradicate the elevated gold-islands. The method depends on a repetitive STM scanning over the same part of the SAM at restricted tunnelling conditions. After almost 6 h of successive scanning, the surface becomes clean and free of the elevated islands. Moreover, this method was found to induce phase transformation into β-phase. The size of the ordered domains of the β-phase was found to exceed five times that of α-phase. Such a long-range ordering of the β-phase at room temperature has not been previously observed for any system on Au(1 1 1). After detailed analyses, the β-phase was found to have a 33.5% of lower packing density than that of α-phase.