Experimental study of the effect of disk obstacle rotating with Different angular ratios on heat transfer and pressure drop in a pipe with turbulent flow

Journal of Thermal Analysis and Calorimetry - This article presents the effects of a circular disk obstacle with different angle ratios on heat transfer and pressure drop under a turbulent flow...     

Numerical simulation of particle-laden flow in an industrial wastewater sedimentation tank

Meccanica - The wastewater of steel production factories consists of a large amount of very small metal particles. The metal particles in this wastewater enter a large sedimentation tank and are...     

Introducing the theory of successful settling in order to evaluate and optimize the sedimentation tanks

A rectangular settling tank in full scale is investigated using the Fluent software to increase its efficiency. First, the pure water is simulated in the absence of particles. Then particles are injected into the flow field and tracked by means of the discrete phase model. Three methods are presented to optimize the settling tank: (1) adding a baffle which is mounted in the bottom and is extended up to the near of free surface, (2) adding a baffle which is mounted in the free surface and is extended up to the near of the tank bottom and (3) install a bi-directional baffle which is mounted in the free surface and is extended up to the near of the bottom. These three suggestions are checked using the short-circuiting phenomenon and the successful settling theory. The successful settling theory states that a particle can be accounted as a “trapped” particle if (1) settled particle stays static and stable in the tank bottom and (2) settled particle doesn’t return to purified sewage. Although the second method provided higher efficiency, the third method was selected as the most appropriate method in order to optimize the settling tank.     

Towards novel super‐elastic foams based on isoperene rubber: Preparation and characterization

A novel and conventional closed cell polyisoprene rubber (IR) foams were produced by a single step limited‐expansion and two step unlimited‐expansion foaming process, respectively. The effect of 3 to 12 part per hundred rubber (phr) of azodicarbonamide (ADC) foaming agent on their structure and properties of developed novel foams were studied. In developed novel foams, the density was strangely independent of ADC content; however, the cell sizes conversely related to ADC content and it decreased by 60% (555‐330 μm) and the internal cell pressure build up from 1 to 3.7 atm, which was related to pressure‐free foaming method. The both reasons of compressed gas trapped inside cells and constant density not only caused unique enhancement in novel foams mechanical properties as hardness and modulus but also improved their dynamic properties as hysteresis and elasticity. Results of conventional IR foams showed that, their foam density as well as dynamic and mechanical properties sharply decreased with increasing ADC content from 3 to 12 phr. For clear expression, in samples with 12 phr of ADC, novel developed foams have more foam density (180%), more hardness (240%), more modulus (290%), and smaller cell size (75%) than conventional foams. Finally, novel developed foams were super‐elastic material with no hysteresis and no plastic deformation while conventional foams had 40% hysteresis and 10% plastic deformation under the same compression conditions.     

Magnetic Nanoparticle-Reinforced Dual-Template Molecularly Imprinted Polymer for the Simultaneous Determination of Oxazepam and Diazepam Using an Electrochemical Approach

Journal of Analytical Chemistry - In the current research, an electrochemical sensor was fabricated to simultaneously quantify oxazepam and diazepam based on reinforced magnetic multi-walled carbon...