Development of a bioanalytical method for the quantification of sinococuline in human plasma and its application in phase I clinical pharmacokinetic study

A selective, highly sensitive, precise, and novel bioanalytical method has been developed and validated to quantify sinococuline, an active constituent present in the phytopharmaceutical drug product containing Cocculus hirsutus plant extract, in vivo. Chromatographic separation was achieved on a Luna Omega Polar-C18 bonded analytical column maintained at 45°C. The isocratic mobile phase consisted of methanol and ammonium formate buffer (60:40, v/v) at acidic pH with a low flow rate of 0.250 mL/min. Detection was performed on an API 4000 mass spectrometer using electrospray ionization in positive polarity and multiple reaction monitoring mode to achieve a lower limit of quantification of 1.50 ng/mL. Excellent accuracy and precision were obtained after extracting the analyte from plasma samples using a chemical analogue as an internal standard in the absence of an isotope-labeled compound. The extraction efficacy was evidenced from recovery study, and the analyte was found to be stable in plasma. Validation study demonstrated linearity with coefficient of correlation, r ≥ 0.99, and minimal matrix effect. This bioanalytical method was successfully applied to evaluate pharmacokinetic parameters of sinococuline from a phase I clinical trial of an aqueous extract of C. hirsutus in healthy human volunteers.     

An approximation algorithm for finding long paths in Hamiltonian graphs

In this paper we present a polynomial-time algorithm that finds paths of length Ω((logn/loglogn)²) in undirected Hamiltonian graphs, improving the previous best of Ω(logn).     

Synthesis and characterization of soluble polyimides containing trifluoromethyl groups in their backbone

A series of polyimides were synthesized from 2,2‐Bis(3,4‐dicarboxyphenyl)hexafluoropropane, 2,2‐bis(3‐amino‐4‐hydroxyphenyl)‐hexafluoropropane, and 4,4′‐oxydianiline by chemical imidization. The effects of the diamine ratios on the properties of the films were evaluated through the study of their thermal, electrical, and morphological properties. All the polymers exhibited better solubility in most of the organic solvents and hence were easily processable. Polyimides with more 2,2‐bis(3‐amino‐4‐hydroxyphenyl)‐hexafluoropropane exhibited better solubility and a low refractive index, which is highly desired for microelectronic applications. The dielectric constant and birefringence were strongly dependent on the fluorine content. With an increase in the fluorine substitution, both the dielectric constant and birefringence decreased. All the polymers exhibited high thermal stability (>400 °C). The absence of crystalline melting in differential scanning calorimetry and broad wide‐angle X‐ray diffraction patterns revealed the amorphous nature of the polymers, which was due to the presence of bulky CF₃ groups and hinged ether linkages of the diamine component. The residual stress values decreased with an increase in the 4,4′‐oxydianiline content, and the results were in agreement with the dielectric constant. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4303–4312, 2004     

Les phenomenes de relaxation non isotherme dans les copolymeres ethylene-acetate de vinyle—II. Thermoluminescence

Thermoluminescence glow curves displayed by ethylene-vinyl acetate copolymers after u.v. irradiation at low temperature have been compared to the depolarization thermocurrents (DTC) described in a previous publication, in order to establish a possible correlation between the thermal liberation of the trapped carriers and the intrinsic relaxation phenomena. The detailed analysis of these glow curves has been carried out, either by studying their spectral distributions between 300 and 650 nm, or by the systematic application of the classical method of partial glow and by a method of partial irradiation which consists in irradiating the sample isothermally at different temperatures in several experiments. Two main glow peaks corresponding to distinct spectral emission zones were found. These peaks occur in temperature zones similar to those of appearance of the DTC peaks; the latter were assigned to primary and secondary dipolar relaxations, i.e. α and β type relaxations, respectively. In addition, the β glow peak presents properties comparable with those of the DTC β peak and hence results probably from thermal untrapping, this untrapping being at least partly assisted by short range chain motions in the polymer. The α glow peak, on the other hand, shows little correspondence with the DTC peak and has essentially a superficial origin; it probably arises from two distinct traps associated with impurities or with interface between amorphous and crystalline regions rather than from the polymeric chains themselves.     

The Synthesis and Bioactivity of Dimethyl (2,3- Dihydrobenzo[b][1,4]Dioxin-6-Yl)(Aryl Amino)Methylphosphonates

Abstract

A new series of α-aminophosphonates have been synthesized by a one-pot three-component reaction of 2,3-dihydrobenzo[b][1,4]dioxine-6-carbaldehyde, various amines, and dimethyl phosphite by using nano-TiO₂ as a catalyst under solvent-free conditions at 50°C. The major advantages of the present method are high yields, short reaction times, recyclable catalyst, and solvent-free reaction conditions. Among these new structurally diversified set of α-aminophosphonates, dimethyl (2,3-dihydrobenzo[b][1,4]dioxin-6-yl)(3-nitrophenylamino) methylphosphonate and dimethyl (2,3-dihydrobenzo[b][1,4]dioxin-6-yl)(4-fluoro-3-nitro-phenyl-amino) methylphosphonate have shown higher antioxidant activity in diphenyl picryl hydrazyl (DPPH) scavenging, reducing power assay, and lipid peroxidation methods.     

Synthesis and Bioassay of Ethyl-2- (2-((Diethoxyphosphoryl) (Aryl) Methylamino)Thiazol-4-Yl)-2-(Methoxyimino)Acetates

Abstract

A simple, efficient, and environmentally benign methodology has been accomplished for the synthesis of α-aminophosphonates by one-pot three-component reaction of ethyl-2-amino-α-(methoxy-imino)-4-thiazoleacetate, aldehydes, and diethylphosphite by using Amberlyst-15 as catalyst at room temperature under solvent-free conditions. Their chemical structures were characterized by infrared (IR), NMR (¹H, ¹³C & ³¹P), mass spectral, and elemental analysis. All the title compounds were screened for radical-scavenging activity by 1,1-diphenyl-2-picrylhydrazyl (DPPH), nitic oxide (NO), and hydrogen peroxide (H₂O₂) methods.

Supplementary materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements for the following free supplemental files: Additional text and figures.     

Comparison of multigrid algorithms for high‐order continuous finite element discretizations

We present a comparison of different multigrid approaches for the solution of systems arising from high‐order continuous finite element discretizations of elliptic partial differential equations on complex geometries. We consider the pointwise Jacobi, the Chebyshev‐accelerated Jacobi, and the symmetric successive over‐relaxation smoothers, as well as elementwise block Jacobi smoothing. Three approaches for the multigrid hierarchy are compared: (1) high‐order h‐multigrid, which uses high‐order interpolation and restriction between geometrically coarsened meshes; (2) p‐multigrid, in which the polynomial order is reduced while the mesh remains unchanged, and the interpolation and restriction incorporate the different‐order basis functions; and (3) a first‐order approximation multigrid preconditioner constructed using the nodes of the high‐order discretization. This latter approach is often combined with algebraic multigrid for the low‐order operator and is attractive for high‐order discretizations on unstructured meshes, where geometric coarsening is difficult. Based on a simple performance model, we compare the computational cost of the different approaches. Using scalar test problems in two and three dimensions with constant and varying coefficients, we compare the performance of the different multigrid approaches for polynomial orders up to 16. Overall, both h‐multigrid and p‐multigrid work well; the first‐order approximation is less efficient. For constant coefficients, all smoothers work well. For variable coefficients, Chebyshev and symmetric successive over‐relaxation smoothing outperform Jacobi smoothing. While all of the tested methods converge in a mesh‐independent number of iterations, none of them behaves completely independent of the polynomial order. When multigrid is used as a preconditioner in a Krylov method, the iteration number decreases significantly compared with using multigrid as a solver. Copyright © 2015 John Wiley & Sons, Ltd.