Monitoring the transformation of colloidal crystals by styrene vapor using atomic force microscopy

The stages of transformation of a colloidal crystalline film of latex spheres to a new periodic structure were imaged by atomic force microscopy. Colloidal crystalline films were prepared with 320 nm diameter poly(styrene-co-2-hydroxyethyl methacrylate) (PSt/HEMA) spheres. The hexagonally ordered surfaces of the colloidal crystalline films were transformed with styrene vapor at room temperature to a new morphology having holes in the surface and the same periodicity as the original films. The surfaces of colloidal crystals and the transformed films have a raspberry-like texture superposed on the 320 nm hexagonal periodicity. Both height images and phase images reveal that the latex spheres shrink and the transformation proceeds by an order-disorder-order sequence. The final structure is an interconnected colloidal array with smaller polystyrene particles dispersed in a continuous PSt/HEMA matrix.     

热缓冲剂对稀土贮氢合金吸氢动力学的影响

以铜粉作为热缓冲剂添加到稀土贮氢合金粉中,应用动力学机理函数计算机拟合的方法,研究了ML(NiCoMnAlCu)5和Mm(NiCoMnAlCu)5(ML为富镧混合稀土金属,Mm为富铈混合稀土金属)在α+β相区恒温吸氢动力学.研究结果表明,当铜粉与贮氢合金粉达到一定比例时,能够消除热传导对吸氢动力学的影响.富铈稀土合金和富镧稀土合金吸氢均受氢在β相的内扩散控制,合金中随La/Ce比例的减小,吸氢速度加快.     

一种新型单体引发转移终止剂合成精细结构功能化的聚苯乙烯

自从1982年Ｏｔｓｕ[1]等提出引发转移终止剂(Ｉｎｉｆｅｒｔｅｒ)以来,这类化合物得到了广泛的研究和发展.使用引发转移终止剂的聚合反应是实现“活性”聚合的一个重要方法.引发转移终止剂又分为热引发转移终止剂和光引发转移终止剂两种.热引发转移终止剂除了三苯甲基偶氮苯外[2],均是六取代乙烷类化合物[3～7];而光引发转移终止剂则一般是一些含二硫代氨基甲酰氧基基团的化合物,如Ｎ,Ｎ二乙基二硫代氨基甲酸苄酯(ＢＤＣ)、双(Ｎ,Ｎ二乙基二硫代氨基甲酸)对苯二甲酯(ＸＤＣ)、Ｎ乙基二硫代氨基甲酸苄酯(ＢＥＤＣ)、双(Ｎ乙基二硫代氨基甲酸…     

Structure and properties of (1−x)(0.6Pb(Zn1/3Nb2/3)O3-0.4Pb (Mg1/3Nb2/3)O3)-xPbTiO3 thin films with perovskite phase promoted by polyethylene glycol

The preferential formation of a pyrochlore structure is a knotty problem in the preparation of Pb(Zn_1/3Nb_2/3)O₃ (PZN)-based thin film materials and its presence is significantly detrimental to the dielectric and piezoelectric properties. In this study, 40 mol% of PZN was replaced with Pb(Mg_1/3Nb_2/3)O₃ (PMN) for obtaining a perovskite composition around a morphotropic phase boundary (MPB), (1−x)(0.6PZN-0.4PMN)-xPT ((1−x)PZMN-xPT, PT: PbTiO₃) where x = 0.23. The thin films with this composition were prepared with a polyethylene glycol (PEG) modi-fied sol-gel method on LaAlO₃ substrates. The microstructural evolution of the films on heat treatment was examined with X-ray diffraction. With the aid of PEG, the formation of the pyrochlore phase was suppressed and the perovskite phase formed directly from the amorphous gel film. The multilayer films with a thickness around 0.25 μm showed a single perovskite phase without any detectable pyrochlore structure. Microscopic images showed uniform grain size of a few tens of nanometers. The role of the polymer dramatically promoting the perovskite phase was investigated with the aid of X-ray photoelectron spectroscopy and thermal analysis. The dielectric constant of the obtained film was 4160 at 1 kHz. The film demonstrated typical ferroelectric hysteresis loops and exhibited excellent piezoelectric performance.     

Theoretical formalism and experimental verification of line shapes of NMR intermolecular multiple-quantum coherence spectra

Although the theories and potential applications of intermolecular multiple-quantum coherences (iMQCs) have been under active investigations for over a decade, discussion of iMQC NMR signal formation was mainly confined in the time domain. In this paper, a full line-shape theory was developed to describe iMQC signals in the frequency domain. Relevant features of the line shape, such as peak height, linewidth, and phase, were investigated in detail. Predictions based on the theory agree well with experimental and simulated results. Since radiation-damping effects always couple with iMQCs in highly polarized liquid-state NMR systems, and strongly radiation-damped signals have many spectral characteristics similar to those of iMQCs, a detailed comparison was also made between them from different spectral aspects. With detailed comparison of peak height, linewidth, and phase, this work demonstrates that the iMQC and radiation-damping phenomena result from two completely different physical mechanisms despite that both present similar signal features and coexist in highly polarized liquid-state NMR systems.     

KCl-assisted,chemically reduced graphene oxide for high-performance supercapacitor electrodes

Journal of Solid State Electrochemistry - Graphene with highly flaky state has been successfully prepared through chemical reduction process with the assistance of potassium chloride (KCl) to...     

An efficient stereoselective synthesis of aminocyclohexenes from 7-azanorbornenes via LiAlH4 mediated tandem double bond migration-ring opening sequence

hNav1.7 had received great interest in the past decade owing to its attractive mechanism of actions in pain processing pathway. More recently, we developed a series of efficacious hNav1.7 inhibitors for analgesic, which were characterized with a novel aminocyclohexene as pharmacophore. Herein, we reported our synthetic efforts to construct the unique scaffold, which can be rapidly accessed from readily available 7-azanorbornenes via an unexpected catalyst-free, LiAlH₄ mediated tandem double bond migration-ring opening sequence. A probable mechanism was proposed to illuminate the good regio- and stereoselectivity.     

1,2-Diketones as photoinitiators of both cationic and free-radical photopolymerization under UV (392 nm) or Blue (455 nm) LEDs

The photoinitiation abilities of three 1,2-diketones [i.e., acenaphthenequinone ( ANPQ ), aceanthrenequinone ( AATQ ), and 9,10-phenanthrenequinone ( PANQ )]-based photoinitiating systems [PISs, with additives such as iodonium salt, N-vinylcarbazole (NVK), tertiary amine, and phenacyl bromide (R-Br)] for cationic photopolymerization and free-radical photopolymerization under the irradiation of ultraviolet (UV; 392 nm) or blue (455 nm) light-emitting diode (LED) bulb are investigated. All 1,2-diketones studied exhibit ground state absorption that match with the emission spectra of UV (392 nm) or blue LED (455 nm) better than that of the well-known blue-light-sensitive photoinitiator camphorquinone (CQ). In particular, AATQ /iodonium salt/NVK can show high photoinitiating ability (with epoxide conversion yield >70%) under the UV light irradiation due to the effect of NVK. In addition, 1,2-diketone/iodonium salt (and optional NVK) systems are capable of initiating free-radical photopolymerization of methacrylates, with conversions of 50–58%. Furthermore, some 1,2-diketone/tertiary amine (and optional R-Br) combinations are found to demonstrate high efficiency to initiate free-radical photopolymerization, and 71% of methacrylate conversion can be achieved with PANQ /tertiary amine/R-Br PIS. Some 1,2-ketone-based PISs can even exhibit higher efficiency than the CQ-based systems. The photochemical mechanism of the radical generation from the 1,2-diketone-based PISs is investigated and found to be consistent with the related photopolymerization efficiency. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 792–802     

Effect of functionalized multiwall carbon nanotubes on the curing kinetics and reaction mechanism of bismaleimide–triazine

Functionalized multiwall carbon nanotubes (f-MWCNTs) with varying functionalization degrees were prepared by chemical methods. The effect of f-MWCNTs on the cure kinetics of bismaleimide–triazine (BT) resin was studied through nonisothermal differential scanning calorimetry (DSC) methods. The reaction activation energy (E _α ) was determined by Flynn–Wall–Ozawa method. The results show that f-MWCNTs have more acceleration ability than pristine MWCNTs, due to more groups on the surface of f-MWCNTs than that of pristine MWCNTs. The activation energy was decreased from a value of 91.3 kJ mol^?1 for the neat BT resin to 74.2 kJ mol^?1 at the small mass loading (1.0 %) of f7-MWCNTs. The effect of f-MWCNTs on the reaction mechanism has been investigated. It shows that the f-MWCNTs accelerate the cure reaction of BT resin by providing the Lewis acids (H⁺) to make the “Diels–Alder” reaction and “ENE” reaction of BT resins more efficient. These findings offer useful insights into the cure technology of thermosetting resin filled with f-MWCNTs, without negative effect on the cure reaction.     

Rapid determination of α‐tocopherol in cereal grains using dispersive liquid–liquid microextraction followed by HPLC

The traditional for the determination of α‐tocopherol in cereal grains includes saponification of a sample followed by liquid–liquid extraction, and it is time‐ and solvent consuming. In this study, a dispersive liquid–liquid microextraction (DLLME) method was developed to extract α‐tocopherol in situ from the saponified grain sample solution. The DLLME experimental parameters including the type and volume of extractants, the volume of dispersers, the addition of salt and the extraction/centrifuging time were examined and optimized. The recommended analytical procedure showed excellent precision (relative SDs of the α‐tocopherol amount of 3.1% over intraday and 7.2% over interday), high sensitivity (the detection limit of 1.9 ng/mL), and strong recovery values (88.9–102.5%). In addition, statistical analyses showed no significant difference between the detected amounts of α‐tocopherol found by the standardized method and this new procedure. The method was successfully applied to determining the amounts and distribution of α‐tocopherol in 14 cereal grain samples.