面心立方C60表面过程的计算机模拟

近年来发现的C60及其金属掺杂化合物形成一个新的材料族，其半导体性质、超导性质及非线性光学性质已受到广泛注意，但目前对这类材料的表面性质尚缺乏研究，我们曾采用参数化的Lenard－Jones6－12模型函数比较不同晶型C6o的相对稳定性　[1]，预测面心立方C60（FccC60）的声子散射频率和态密度[2]，并计算其表面能[3]，取得有意义的结果，表明这一简单模型势能函数是C60分子间有效范德华作用的一种合理抽提．本工作进一步将该势能函数应用于研究fccC60表面吸附分子的迁移机理，并用蒙特卡罗方法模拟fcC（110）及（100）晶面的熔化过程，…     

以一种新型Gemini表面活性剂作为介孔模板剂通过转晶过程合成介孔ZSM-5分子筛

将一种新型Gemini表面活性剂,丙撑基双(十八烷基二甲基氯化铵)[C18H37(CH3)2–N+–(CH2)3–N+–(CH3)2C18H37]Cl2(C18-3-18),作为介孔模板剂用于水热法合成介孔ZSM-5分子筛.结果表明,在130 oC低温晶化即可高效合成介孔ZSM-5分子刷.C18-3-18的加入量可影响到所合成介孔ZSM-5分子筛的相对结晶度和织构性质,它的形成遵从一个转晶过程.在合成初期,凝胶中介孔模板剂C18-3-18的使用导向了介孔材料的生成;随后在TPABr的模板作用下,介孔材料慢慢转晶生成具有MFI结构的介孔ZSM-5;然后所合成的介孔ZSM-5晶粒进一步长大并聚集形成块状颗粒,同时产生晶间介孔.C18-3-18作为介孔导向剂不仅可用于合成介孔ZSM-5分子筛,也可用于其它介孔分子筛的合成中.     

A small sample-size automated adiabatic calorimeter from 70 to 580 K——Molar heat capacities of α-Al_2O_3

An automatic adiabatic calorimeter for measuring heat capacities in the temperature range 70—580 K, equipped with a small sample cell of 7.4 cm~3 in the internal volume has been developed. In order to obtain a good adiabatic condition of the calorimeter at high temperature, the calorimeter was surrounded in sequence by two adiabatic shields, three radiation shields and an auxiliary temperature-controlled sheath. The main body of the cell made of copper and the lid made of brass are silver-soldered and the cell is sealed with a copper screw cap. A sealing gasket made of Pb-Sn alloy is put between the cap and the lid to ensure a high vacuum sealing of the cell in the whole experimental temperature range. All the leads are insulated and fixed with W30-11 varnish, thus a good electric insulation is obtained at high temperature. All the experimental data, including those for energy and temperature are collected and processed automatically with a personal computer using a predetermined program. To verify the     

Influence of Aging Time on the Properties of Precursors of CuO／ZnO Catalysts for Methanol Synthesis

The aging process of pure copper precursors and copper-zinc binary precursors were studied by XRD, TG-DTG and TPR techniques. The catalytic activity and stability of CuO/ZnO were tested using fixed-bed flow reactor, and the physical properties of the catalysts and Cu species were characterized with N2 adsorption and N2O passivation method, respectively. For the Cu-Zn binary system prepared at the precipitating condition of pH=8.0 and temperature=80℃, the initial phase was a mixture of copper nitrate hydroxide Cu2(NO3)(OH)3, georgeite and hydrozincite Zn5(CO3)2(OH)6. By increasing the duration of its aging time, the phase of Cu2(NO3)(OH)2 first transited to georgeite, and then interdiffused into Zns(CO3)2(OH)6 and resulted in two new phases: rosasite (Cu,Zn)2CO3(OH)2 and aurichalcite (Zn,Cu)5(CO3)2(OH)6. The former phase was much easier to be formed than the latter one, while the latter phase was more responsible for the activity of methanol synthesis than the former one. It is found that the composition and structure of the precursors altered obviously after the colour transition point. The experimental results showed that methanol synthesis is a structure-sensitive catalytic reaction.     

纳米分子筛ZSM-5的热稳定性研究

Nanosized ZSM 5 zeolite was synthesized by hydrothermal method and characterized by XRD and TEM techniques. The specific heat of the nanosized ZSM 5 zeolite was measured in the temperature range from 79 to 370 K, and its enhancement in specific heat was observed as compared with the corresponding microsized zeolite, indicating that the nanosized ZSM 5 zeolite possesses higher surface activity. The thermostability of the samples was determined by differential scanning calorimetric (DSC) and thermogravimetric (TG) techniques. The DSC results showed that, for the nanosized ZSM 5, a broad exothermic peak is observed from 1?300 K; for the microsized ZSM 5, the corresponding exothermic peak begins at 1?400 K, and a distinct phase transition can be observed at 1?620 K. The TG results showed that, for the nanozised ZSM 5, the maximum mass loss ratio is 6 9%, and two mass loss stages can be observed in the temperature ranges of 298～663 K and 923～ 1?273 K, respectively; for the microsized ZSM 5, the maximum mass loss ratio is 6 5% and it is more stable than the nanosized ZSM 5.     

基于移动可信平台模块的通用PC机系统可信增强

为了提高终端安全性能,提出并实现了移动可信平台模块(RTPM)和在其支持下的通用PC机系统可信增强架构及原型设计方案.RTPM通过USB接口与计算机平台连接,可接管启动控制权对后续启动的系统进行可信度量.该架构以RTPM为支撑实现完整的系统可信引导,将可信计算机制扩展剑操作系统和应用层,在不改变PC机硬件结构和通用计算机基本输入输出系统的情况下构建可信计算环境,为终端安全技术手段提供基础支撑,具有很强的实用性.     

Quantum chemical study on enantioselective reduction of aromatic ketones catalyzed by chiral cyclic sulfur‐containing oxazaborolidines. Part 2. Structures of catalyst–borane–ketone adducts

In the present paper, the ab initio molecular orbital method is employed to study the structures of the adducts of borane and aromatic ketone to chiral cyclic sulfur‐containing oxazaborolidine used as a catalyst in the enantioselective reduction of aromatic ketone. The catalyst–borane–ketone adducts have four different structures. All the structures are optimized completely by means of the Hartree–Fock method at 6‐31g* basis sets. The structure which is of the greatest advantage to a hydride transfer from the borane moiety to the carbonyl carbon of aromatic ketone is the one with the next lowest formation energy, and the plausible transition state for the hydride transfer is predicted to be of a twisted boat structure. © 2000 John Wiley & Sons, Inc. Int J Quant Chem 78: 252–260, 2000     

Enhancement of Molar Heat Capacity of Nanostructured Al2O3

The nanosized alumina prepared by the hydrolysis method with an average particle size of 20 nm was characterized by X-ray diffraction. The heat capacity measurements of the prepared sample were carried out using an adiabatic calorimeter in the temperature range from 78 to 370 K. Enhancement of heat capacity was observed in the nanostructured materials as the heat capacity data were compared with those of the corresponding coarse-grained materials. The enhanced heat capacity was discussed on the basis of experiments. Differential scanning calorimetry and thermogravimetry were used to determine the thermal stability of the nanostructured alumina.     

Event-triggered output feedback sliding mode control of mechanical systems

Nonlinear Dynamics - This paper is concerned with event-triggered sliding mode control (SMC) for uncertain mechanical systems subject to limited communication capacity. We consider the scenario...     

沉淀温度对CuO/ZnO/Al2O3催化剂前驱体物相及催化水煤气变换反应活性的影响

 用X射线衍射、差热热重测定、程序升温还原、N2吸附、N2O滴定和常压微反活性评价技术考察了沉淀温度对CuO/ZnO/Al2O3系催化剂及其前驱体的物相和催化水煤气变换反应活性的影响. 结果表明,在沉淀温度为60～90 ℃时,催化剂前驱体中主要存在Cu2CO3(OH)2,(Cu,Zn)2CO3(OH)2和(Cu,Zn)6Al2(OH)16CO3·4H2O三种物相. 焙烧后的催化剂样品中形成了较多的CuO-ZnO固溶体,沉淀温度升高有利于CuO-ZnO固溶体的形成及催化剂活性的提高. 水煤气变换反应是一个非结构敏感型反应.