Pfropfcopolymerisation von Cellulose mit zwei Vinylmonomeren

Zusammenfassung Die vorliegende Arbeit stellt eine Beschreibung von Experimenten dar, die die Erhöhung der Pfropfbereitschaft von trägen Komponenten durch Beimischung von aktiveren zum Ziele hatten.Das Trägermolekül war in allen Fällen Cellulose in Form von hochgradig gereinigtem Zellstoff. Durch die Verwendung von Mischsystemen aus Styrol und Methylmethacrylat gelang es, das trägere Styrol in bedeutend größerer Menge auf die Cellulose aufzupfropfen, als es bei Abwesenheit des aktiven Methylmethacrylats der Fall war.

---

Grafting Polymerization of Cellulose with Two Vinyl Monomers

This paper describes experiments to increase the grafting of cellulose with components of poor reactivity by mixing them with highly reactive ones. A highly purified wood pulp was used as backbone. Using combinations of styrene and methyl methacrylate it was possible to graft considerably higher amounts of the poorly reacting styrene than in the absence of the highly reactive methyl methacrylate.

---

---

Nach einem Vortrag, den der erstgenannte der Autoren im Rahmen der Arbeitstagung des Vereins Österreichischer Chemiker am 27. September 1968 in Wien gehalten hat.     

Charakterisierung von Kieselsäuresolen mit Röntgenkleinwinkelstreuung,Elektronenmikroskopie und Stickstoff-Adsorption

Zusammenfassung Es werden die mittleren Dimensionen der Teilchen dreier Kieselsäuresole mit derRKWS und demE. M. bestimmt. Entgegen der Angabe anderer Autoren ergibt sich dabei bei Berücksichtigung der Teilchengrößenverteilung nahezu völlige Übereinstimmung beider Methoden.RKWS undE. M. ergeben angenähert auch die gleiche mittlere Schwankung _m der Teilchendurchmesser. Die mit derRKWS bestimmte spezifische Oberfläche ist stets größer als die aus der N₂-Adsorption bestimmte, und zwar nimmt der relative Unterschied mit dem mittleren Teilchendurchmesser zu. Die mit derRKWS bestimmte innere Hydratation liegt bei 0,15–0,26 g H₂O/g SiO₂.

---

Characterization of silica sols by means of X-ray small angle scattering, electron microscopy and nitrogen adsorption

X-ray small angle scattering and electron microscopy are used to determine average dimensions of particles in three silica sols. In contradiction to findings of other authors, a nearly complete agreement of both methods is found if the particle size distribution is taken into account. Identical average variations _m of the particle diameters are obtained for both methods. The inner surface determined by means of the X-ray small angle scattering is in all cases larger than that obtained from N₂-adsorption, the difference increasing with average particle diameter. The inner hydration determined by means of the X-ray small angle scattering lies at 0.15–0.26 g H₂O/g SiO₂.

---

---

Mit 8 Abbildungen

---

Herrn Professor Dr. Dr. h. c.Otto Kratky zum 70. Geburtstag mit den herzlichsten Glückwünschen gewidmet.     

Strukturviskosität von verdünnten Lösungen von Biopolymeren

The importance of the rheological behaviour of solutions of macromolecules is briefly evaluated. The viscosity of the solutions depends on concentration, shear rate and time of shear, this relation being determined by the structure of the dissolved molecules. In dilute solutions shear dependence of viscosity is very frequently caused by the preferential orientation of anisotropic molecules. In such a case the particle dimensions can be calculated from the true limiting viscosity number, an anisotropy factor, the rotational diffusion constant and the effective particle density. These numbers can be derived from the flow curve, which has been extrapolated to zero concentration. It is necessary to measure the flow curve at shear gradients, which are sufficiently low to allow for an extrapolation to vanishing shear rate. By comparing the experimental flow curve with a choice of theoretical ones, the rotational diffusion constant and the anisotropy factor (axial ratio) can be found. From the limiting viscosity number and the axial ratio, the particle density can be calculated.     

Vergleichende Messungen des Zeta-Potentials von Faserstoffen durch Elektroosmose und Strömungsstrom/Strömungspotential

An apparatus for the determination of zetapotential is described, which allows measurement of both streaming potential and streaming current as well as electroosmosis with one and the same fiber diaphragm with various electrodes (calomel, Ag/AgCl, palladium). Measurements with glass fibers, fibers of polyacrylonitrile and of polyester, and with cellulose pulp show that identical values for the electrokinetic parameters are obtained independent of voltage applied during electroosmosis resp. pressure difference during streaming measurements. This allows the conclusion that the zetapotential in dilute electrolyte solution is here an unequivocally determinable figure.

Herrn Prof. Dr.R. C. Schulz mit den herzlichsten Glückwünschen zum 65. Geburtstag gewidmet.     

Photochemical degradation of hyaluronic acid by singlet oxygen

Changes of the rheological properties of hyaluronic acid (sodium-magnesium salt) solutions after exposure to UV radiation indicate a vigorous decrease in their viscosity, but its still strong shear rate dependence. Whereas the presence of the singlet oxygen sensitizer (anthracene-1-sulphonic acid) brings about a loss of shear dependence; the studied solutions show newtonian behavior.     

Influence of methyl‐modified silyl groups on the properties of polymers and Si/B/N/C ceramics derived from N‐silylated borazine derivatives

Thermal silazane cleavage of dichloroboryldisilylamines (SiCl_mMe_3?m)N(SiMe₃)(BCl₂) (1: m = 1; 2: m = 2) at 196 °C leads to the borazine derivates [(SiCl_mMe_3?m)NB(Cl_nMe_1?n)]₃ (3: m = 1, n = 0.185; 4: m = 2, n = 0.111) characterized by NMR and IR spectroscopy and mass spectrometry. Single‐crystal X‐ray diffraction structure analyses reveal (BN)₃ units with unusual twisted boat conformations in both compounds. Additionally, more detailed studies are done to clear up the function of the by‐products (SiCl_mMe_3?m)N(SiClMe₂)(BClMe) formed during the cyclization step leading to asymmetrically boron substituted borazine derivatives. The single‐source precursors 3 and 4 were cross‐linked with methylamine producing polymers 3P and 4P, which were transformed into black amorphous materials with ceramic yields of 20.8 % and 50.3 %, respectively. Ceramic 4C (Si_1.00B_0.98 N_2.55 C_1.37O_0.05) was further investigated by ¹¹B and ²⁹Si magic angle spinning (MAS) NMR spectroscopy. A combined study of high‐temperature TG analyses and X‐ray powder diffraction analyses confirms the thermal stability of 4C up to 1670 °C. Copyright © 2012 John Wiley & Sons, Ltd.     

Zeta Potential as an Analytical Tool for Graft Copolymers and for Polymer Surfaces

Polymers with electrically charged groups exhibit a zeta potential when in contact with electrolyte solutions in water. This can be measured with solid polymers as fibers, foils, or granulates. The method of streaming potential/streaming current allows the determination of the carboxyl content of cellulose grafted with poly-(acrylic acid). Since zeta-potential measurements concern the surface of the sample, the method yields information on the type of grafting; i.e., whether it takes place mainly on the surface or throughout the bulk. By measuring the pH dependence of the zeta potential it is possible to obtain the pK value of the charged groups. The significance of zeta potential as an analytical tool is emphasized.     

Pfropfversuche an Cellulose mit Siloxanen

Zusammenfassung Die an der Cellulose schon vielfach erprobte Pfropfung mit polymerisierbaren olefinischen Monomeren, wie Styrol, Acrylnitril, Methylacrylat, Vinylchlorid u. a., wurde hier mit polykondensierbaren Siliciumverbindungen versucht. Die gewonnenen Pfropfprodukte, die technisch als Siliconcellulosen bezeichnet werden könnten, sind einer kurzen Prüfung in bezug auf ihre Hydrophobie und ihren Siloxangehalt unterzogen worden.Mit 6 AbbildungenHerrn Prof. Dr.Fritz Wessely zu seinem 70. Geburtstag mit den herzlichsten Glückwünschen gewidmet.