High-pressure structure of Li2CO3

The high-pressure behavior of Li₂CO₃ is studied up to 25 GPa with synchrotron angle-dispersive powder X-ray diffraction in diamond anvil cells and synthesis using a multi-anvil apparatus. A new non-quenchable hexagonal polymorph (P6₃/mcm, Z=2) occurs above 10 GPa with carbonate groups in a staggered configuration along the c-axis—a=4.4568(2) Å and c=5.1254(6) Å at 10 GPa. Two columns of face-shared distorted octahedra around the Li atoms are linked through octahedral edges. The oxygen atoms are coordinated to one carbon atom and four lithium atoms to form a distorted square pyramid. Splittings of X-ray reflections for the new polymorph observed above about 22 GPa under non-hydrostatic conditions arise from orthorhombic or monoclinic distortions of the hexagonal lattice. The results of this study are discussed in relation to the structural features found in other Me₂CO₃ carbonates (Me: Na, K, Rb, Cs) at atmospheric conditions.     

Direct determination of traces of Ag, Cd, Pb, Bi, Cr, Mn, Co, Ni, Li, Be, Cu and Sb in environmental waters and geological materials by simultaneous multi-element graphite furnace atomic absorption spectrometry with Zeeman-effect background correction

A method was developed for direct determination of minor and trace amounts of Cr, Mn, Cu, Ni, Co, Li, Pb, Cd, Bi, Sb, Be and Ag in silicate rock, lake and stream sediments using a microwave oven dissolution method and a multi-element graphite furnace atomic absorption spectrometer equipped with a Zeeman-effect background correction device. The measurement technique was also suitable for direct determination of trace and ultra-trace amounts of these elements in drinking and seawater samples. A rock or sediment sample was brought into solution in a Teflon vessel by heating in a microwave oven with a mixture of hydrofluoric acid and aqua regia, followed by a further heating with a mixture of boric acid and ethylenediaminetetraacetic acid. The specified elements were directly determined in a group of four elements in one firing and eight elements in two firings from this solution or from a diluted solution using the optimum operating parameters developed in this work. The method, tested with 23 international reference rocks and sediments and seven international quality control and reference water samples, showed good to excellent agreement with the recommended values.     

Novel Copolymers of 2-Phenyl-1,1-dicyanoethylene with 4-Fluoro- and Pentafluorostyrene

Copolymerization of 2-phenyl-1,1-dicyanoethylene (PDE) with 4-fluorostyrene and pentafluorostyrene in solution with radical initiation (ABCN) at 70°C yielded random copolymers with PDE alternating units. The composition of the copolymers was calculated from nitrogen analysis and the structure was analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r₁) and the tendency toward alternation of monomer units in the copolymer for these two monomers, is 4-fluorostyrene (1.96) > pentafluorostyrene (0.51). Higher glass transition temperature of the copolymers in comparison with that of homopolymers indicates a decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit.     

Removal of Cyanide from Aqueous Solutions by Adsorption on Activated Carbon Prepared from Lignocellulosic By-products

Cyanide is considered one of the most dangerous compounds for the environment. They are discharged by various industries: chemical and metallurgical processes (extraction of gold and silver) and food industries. Adsorption is among the most used processes for elimination of cyanides particularly for the low concentrations. In this work, the cyanide removal is carried out by adsorption onto activated carbons prepared from olive stones and coffee ground. So we can promote this by-product as an inexpensive adsorbent. The prepared activated carbons are characterized by scanning electron micrograph and by determination of the physicochemical properties and specific surface area. All the adsorption experiments were performed in batch mode on synthetic water cyanide (KCN) at pH 10.8–11.0 to avoid volatilization of very toxic HCN. To describe the adsorption kinetics, the kinetic models of pseudo-first-order, pseudo-second-order, and intra-particle diffusion were applied. The experimental equilibrium data for adsorption of free cyanide were analyzed by the Langmuir, Freundlich, and Temkin isotherm models.     

Radical copolymerization of vinylidene cyanide with 2,2,2‐trifluoroethyl methacrylate: Structure and characterization

A novel copolymer of vinylidene cyanide (VCN) and 2,2,2‐trifluoroethyl methacrylate (MATRIF) was synthesized by bulk free radical process in a 52% yield from an equimolar comonomer feed. The copolymer's composition and microstructure were analyzed by FTIR, ¹H‐ and ¹³C‐NMR spectroscopy, SEC, and elemental analysis. The reactivity ratios calculated from both the Q‐e Alfrey‐Price parameters and the Jenkins' Patterns Scheme indicate a tendency to alternation in the copolymerization, the latter method suggesting that MATRIF homopropagation be slightly favoured (r_V = r₁₂ = 0.1, r_M = r₂₁ = 0.3). The molar incorporation of VCN in the copolymer was only 42 mol % according to the 9.0 wt % nitrogen content determined by elemental analysis, in good agreement with the value obtained by ¹H‐NMR. High‐resolution ¹H and ¹³C‐NMR spectra were used to study the microstructure of the copolymer. As an example, the three well‐resolved carbonyl resonances in the ¹³C‐NMR spectrum were assigned to the MATRIF‐centered triads VMV, VMM, and MMM, respectively, (V and M stand for VCN and MATRIF, respectively). The presence of VCN dyads (e.g., in VVM and VVV sequences) was shown to be marginal or absent altogether. Thermogravimetric analysis of poly(VCN‐co‐MATRIF) copolymer showed good thermal stability, and its main pyrolytic degradation taking place only above 368 °C. A 4% weight loss at about 222 °C suggested the presence of a few VCN homodyads, possibly inducing thermal depolymerization. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Ferroelectricity of perovskites under pressure

Ab initio simulations and experimental techniques are combined to reveal that, unlike what was commonly accepted for more than 30 years, perovskites and related materials enhance their ferroelectricity as hydrostatic pressure increases above a critical value. This unexpected high-pressure ferroelectricity is different in nature from conventional ferroelectricity because it is driven by an original electronic effect rather by long-range interactions.     

Long-range critical wetting: observation of a critical end point

Alkanes deposited on aqueous substrates exhibit two different types of wetting behavior: alternatively to the usual first-order wetting transition, a sequential-wetting scenario of a long-range critical wetting transition preceded by a first-order thin-thick transition may be observed. Here, we present the first successful experimental attempt to locate the transition point between the standard first-order wetting and the long-range critical wetting: a critical end point, observed in a mixture of pentane and hexane which is deposited on an aqueous solution of glucose. Furthermore, we present the first direct measurement of the contact angle in the intermediate wetting state (frustrated-complete wetting) in the sequential-wetting scenario of hexane on brine and compare to theoretical predictions.     

A new paclitaxel prodrug for use in ADEPT strategy

A new paclitaxel prodrug intended for use in Antibody-Directed Prodrug Therapy (ADEPT) or Prodrug Monotherapy (PMT) has been prepared. This prodrug was originally designed to be activated into the drug by human beta-glucuronidase. In order to enhance the liberation rate of paclitaxel, an elongated spacer system including a nitro-aromatic derivative and a N,N'-methylethylenediamine was incorporated between the sugar moiety and the drug. Indeed, this new prodrug proved to be activated significantly faster than a former paclitaxel prodrug containing a conventional spacer.