Photografting as a versatile,localizable, and single‐step surface functionalization of silica‐based monoliths dedicated to microscale separation techniques

In this work, we developed a surface functionalization way of silica monoliths with a rapid, simple, versatile, and localizable photografting step. The elaboration of a photoreactive layer at the surface of monoliths was first optimized. The functionalization with [γ‐(methacryloyloxy)propyl]trimethoxysilane at 80°C in a hydro‐organic solution containing triethylamine as catalyst allows reachng the highest density of methacrylate photoactive moieties on silica surfaces. These methacrylate reactive surfaces were subsequently photografted within few minutes with acrylate monomers bearing alkyl chains (C₁₂ and C₁₈). The photografting efficiency was determined by monitoring the retentive properties of monoliths in the RP mode. The retention factors are of the same order of magnitude as highly retentive columns obtained by modification of silica surface with long‐alkyl chain silanes or by thermal polymerization of long‐alkyl chain monomers. It was also verified that such grafting neither impaired the efficiency of the monolithic stationary phase (H_min = 6–8 μm in nano‐LC) nor its permeability (about 6 × 10^?14 m²). Further, it was also demonstrated that photografting is localizable in nonmasked defined areas. Results obtained in anion‐exchange chromatography after photopolymerization of [2‐(methacryloyloxy)ethyl]trimethylammonium chloride are presented as well to demonstrate the versatility of the developed approach.     

Retention of β blockers on native titania stationary phase

In recent years, metal oxides such as titania have been commercially available as chromatographic beds that can potentially be used to achieve novel separations of polar compounds. For example β blockers, which are more often encountered in environmental sciences, have a wide range of polarity, and their basic character leads to difficult sample treatment and separation on conventional silica‐based sorbents. The contribution of titania to the selective analysis of nine β blockers was evaluated in terms of retention mechanisms observed in hydrophilic interaction LC using acetonitrile/water mobile phases with various additives. The mobile phase additives enabled to control the β blocker charge as well as the titania surface charge. Depending on their respective ionic state, various retention mechanisms were identified at low water contents (<40%), including mainly adsorption mixed with hydrophilic interaction LC partition, ion exchange and ion exclusion. An unexpected retention was also observed for high water content and high pH, changing the selectivity of the support.     

Use of N-trifluoroacetyl-protected amino acid chlorides in peptide coupling reactions with virtually complete preservation of stereochemistry

The use of protected amino acid chlorides for peptide coupling reactions has long been avoided due to the extensive racemization that commonly occurs during either the acid chloride formation or the coupling reaction itself. Conditions are described which allow N-trifluoroacetyl-protected amino acid chlorides to be generated in high purity and with high retention of stereochemical integrity. Control of temperature is the predominant factor in controlling racemization, and rapid formation of acid chlorides under low temperature can be conveniently achieved using Vilsmeier reagent. Stereochemical integrity is further maintained when coupling of N-trifluoroacetyl acid chlorides is carried out with amino acid esters under Schotten-Baumann conditions using specific controls on pH, temperature, and agitation. Second order rate constants for coupling and the azlactone formation associated with racemization were measured to be 4260 and 3.6 L/mol s, respectively. This high rate differential allows for the reaction to be run with a minimum excess of amine ester, and makes it suitable for continuous processing. The applicability of the preferred coupling conditions to a range of amino acid couplings is described.     

Supramolecular Frameworks Based on Rhenium Clusters Using the Synthons Approach

The reaction of the K₄[{Re₆Sⁱ₈}(OH)^a₆]·8H₂O rhenium cluster salt with pyrazine (Pz) in aqueous solutions of alkaline or alkaline earth salts at 4 °C or at room temperature leads to apical ligand exchange and to the formation of five new compounds: [trans-{Re₆Sⁱ₈}(Pz)^a₂(OH)^a₂(H₂O)^a₂] (1), [cis-{Re₆Sⁱ₈}(Pz)^a₂(OH)^a₂(H₂O)^a₂] (2), (NO₃)[cis-{Re₆Sⁱ₈}(Pz)^a₂(OH)^a(H₂O)^a₃](Pz)·3H₂O (3), [Mg(H₂O)₆]_0.5[cis-{Re₆Sⁱ₈}(Pz)^a₂(OH)^a₃(H₂O)^a]·8.5H₂O (4), and K[cis-{Re₆Sⁱ₈}(Pz)^a₂(OH)^a₃(H₂O)^a]·8H₂O (5). Their crystal structures are built up from trans- or cis-[{Re₆Sⁱ₈}(Pz)^a₂(OH)^a_4−x(H₂O)^a_x]^x−2 cluster units. The cohesions of the 3D supramolecular frameworks are based on stacking and H bonding, as well as on H₃O₂₋bridges in the cases of (1), (2), (4), and (5) compounds, while (3) is built from stacking and H bonding only. This evidences that the nature of the synthons governing the cluster unit assembly is dependent on the hydration rate of the unit.     

One‐pot synthesis of a new high vinyl content hybrid silica monolith dedicated to nanoliquid chromatography

A new vinyltrimethoxysilane‐based hybrid silica monolith was developed and used as a reversed‐phase capillary column. The synthesis of this rich vinyl hybrid macroporous monolith, by cocondensation of vinyltrimethoxysilane with tetramethoxysilane, was investigated using an unconventional (formamide, nitric acid) porogen/catalyst system. A macroporous hybrid silica monolith with 80% in mass of vinyltrimethoxysilane in the feeding silane solution was obtained and compared to a more conventional low vinyl content hybrid monolith with only of 20% vinyltrimethoxysilane. Monoliths were characterized by scanning electron microscopy, ²⁹Si nuclear magnetic resonance spectroscopy and N₂ adsorption–desorption. About 80% of the vinyl precursor was incorporated in the final materials, leading to 15.9 and 61.5% of Si atoms bonded to vinyl groups for 20% vinyltrimethoxysilane and 80% vinyltrimethoxysilane, respectively. The 80% vinyltrimethoxysilane monolith presents a lower surface area than 20% vinyltrimethoxysilane (159 versus 551 m²/g), which is nevertheless compensated by a higher vinyl surface density. Chromatographic properties were evaluated in reversed‐phase mode. Plots of ln(k) versus percentage of organic modifier were used to assess the reversed‐phase mechanism. Its high content of organic groups leads to high retention properties. Column efficiencies of 170 000 plates/m were measured for this 80% vinyltrimethoxysilane hybrid silica monolith. Long capillary monolithic columns (90 cm) were successfully synthesized (N = 120 000).     

Bioluminescence Profiling of NanoKAZ/NanoLuc Luciferase Using a Chemical Library of Coelenterazine Analogues

We describe here an extensive structure-bioluminescence relationship study of a chemical library of analogues of coelenterazine, using nanoKAZ/NanoLuc, a mutated luciferase originated from the catalytic subunit of the deep-sea shrimp Oplophorus gracilirostris. Out of the 135 O-acetylated precursors that were prepared by using our recently reported synthesis and following their hydrolysis to give solutions of the corresponding luciferins, notable bioluminescence improvements were achieved in comparison with furimazine, which is currently amongst the best substrates of nanoKAZ/NanoLuc. For instance, the rather more lipophilic analogue 8-(2,3-difluorobenzyl)-2-((5-methylfuran-2-yl)methyl)-6-phenylimidazo[1,2-a]pyrazin-3(7H)-one provided a 1.5-fold improvement of the total light output over a 2 h period, a close to threefold increase of the initial signal intensity and a signal-to-background ratio five times greater than furimazine. The kinetic parameters for the enzymatic reaction were obtained for a selection of luciferin analogues and provided unexpected insights into the luciferase activity. Most prominently, along with a general substrate-dependent and irreversible inactivation of this enzyme, in the case of the optimized luciferin mentioned above, the consumption of 2664 molecules was found to be required for the detection of a single Relative Light Unit (RLU; a luminometer-dependent fraction of a photon).     

Novel Procedure for the Synthesis of 1‐Hydroxy‐1,1‐bisphosphonic Acids using Phenols as Medium

A facile synthetic route for the synthesis of bisphosphonates in phenols is described. Preparations of some of bisphosphonates, which are presently in clinical use such as risedronic acid and alendronate sodium, are synthesized following this new, simple method. This procedure can be useful for the synthesis of this class of bone‐resorptive inhibitors in bulk quantities.     

Autonomic self-healing lipid monolayer: a new class of ultrathin dielectric

The electrical performance of stabilized lipid monolayers on H-terminated silicon is reported for the first time. We show that these 2.7 nm thick only ultrathin layers present extremely low current leakage at high electric field and high breakdown voltage that both compare favorably with the best data reported on organic thin film dielectrics. We demonstrate a very unique property of autonomic self-healing of the layer at room temperature with the total recovery of its performance after electrical breakdown. The mechanisms involved in breakdown and self-healing are described.     

Rheological,morphological, and interfacial properties of compatibilized PLA/PBAT blends

The focus of this paper was to gain a true understanding of the impact of a multifunctional epoxide (Joncryl®;ADR-4368) on the interfacial properties of biopolymer blends based on poly(lactic acid) (PLA) and poly(butylene adipate-co-terephthalate) (PBAT). The effect of Joncryl on the shear rheological, morphological, and interfacial properties of the blends was systematically investigated. For the deformed drop retraction experiments, different sandwich model systems (droplet/matrix), representing various scenarios of compatibilization, were prepared, aiming to probe the role of the epoxy-functionalized chains on the interface. The decrease of the interfacial tension in the modified/compatibilized PLA_PBAT and the formation of the PLA-Joncryl-PBAT copolymer were highlighted. A new relaxation peak relative to this copolymer was detected by the relaxation spectrum. Transient start-up shear and nonlinear stress relaxation experiments were carried out and confirmed the obtained results. In addition, the interface contribution was demonstrated using the Lee and Park model. The relaxation time increased with the amount of added Joncryl. Hence, the coexistence of chain extension/branching chains coupled to the PLA-Joncryl-PBAT copolymer formation had to be taken into account to explain the improved mechanical properties.     

The Chemistry of L-Ascorbic and D-Isoascorbic Acids. 3: Efficient Syntheses of Pure R- and S- 1,2-O-Isopropylidene-1,2,4-Butanetriols1

Both enantiomers of 1,2-0-isopropylidene-1,2,4-butanetriol were prepared by two different and simple methods starting from readily available L-ascorbic and D-isoascorbic acids.