Characterization of Mercury – Humic Acids Interaction by Potentiometric Titration with a Modified Carbon Paste Mercury Sensor

Stability constant for mercury binding by commercial and natural humic acids (HA) were determined using a new potentiometric mercury(II) sensor based on dithiosalicylic acid modified carbon paste electrode. The sensor present a high selective and sensitive response to mercury(II) ions, and a low detection limit of 1.8×10^?8 M. The potentiometric titrations curves of humic acids against mercury(II) ions were modeled. For 1.00×10^?7 to 3.00×10^?4 M mercury(II) ion concentration levels the results are consistent with the presence of two different binding sites in the humic acid macromolecule. The strongest binding sites (log K₁ ranging from 10.1 to 6.8) are probably due to interaction with carboxylic acid and amine groups in the molecule, whereas weakest binding sites (log K₂ ranging from 8.8 to 4.5) can be associated to phenolic groups.     

Effects of palmitic acid and cholesterol on proton transport across black lipid membranes

We studied the effect of palmitic acid (PA) and cholesterol (approximately 17 wt.%) on proton translocation across asolectin (charged) and diphytanoylphosphatidylcholine (DPhPC, neutral) black lipid membranes (BLMs). Potential difference (PD), short circuit current (SCC), and conductance (G(total)) were measured with a digital electrometer. Membranes were exposed to pH gradients (0.4-2.0 units), followed by PA addition to bath (symmetrically, 40-65 microM). The membrane conductive pathway was subdivided into an unspecific and a proton-related routes. A computer program estimated the conductances (G(un) and G(H)) of the two pathways from the measured parameters. No significant differences in proton selectivity were found between DPhPC membranes and DPhPC/cholesterol membranes. By contrast, cholesterol incorporation into asolectin increases membranes selectivity to proton. Cholesterol dramatically reduced G(un) reflecting, probably, its ability of inducing order in lipid chains. In asolectin membranes, PA increases proton selectivity, probably by acting as a proton shuttle according to the model proposed by Kamp and et al. [Biochemistry 34 (1995) 11928]. Cholesterol incorporation into asolectin membranes eliminates the PA-induced increase in proton selectivity. In DPhPC and DPhPC/cholesterol membranes, PA does not affect proton selectivity. These results are discussed in terms of the presence of cardiolipin (CL) in asolectin, cholesterol/PA interactions, and cholesterol order-inducing effects on acyl-chains.     

Synthesis and reactivity of silyl ruthenium complexes: the importance of trans effects in C-H activation,Si-C bond formation,and dehydrogenative coupling of silanes

A series of octahedral ruthenium silyl hydride complexes, cis-(PMe(3))(4)Ru(SiR(3))H (SiR(3) = SiMe(3), 1a; SiMe(2)CH(2)SiMe(3), 1b; SiEt(3), 1c; SiMe(2)H, 1d), has been synthesized by the reaction of hydrosilanes with (PMe(3))(3)Ru(eta(2)-CH(2)PMe(2))H (5), cis-(PMe(3))(4)RuMe(2) (6), or (PMe(3))(4)RuH(2) (9). Reaction with 6 proceeds via an intermediate product, cis-(PMe(3))(4)Ru(SiR(3))Me (SiR(3) = SiMe(3), 7a; SiMe(2)CH(2)SiMe(3), 7b). Alternatively, 1 and 7 have been synthesized via a fast hydrosilane exchange with another cis-(PMe(3))(4)Ru(SiR(3))H or cis-(PMe(3))(4)Ru(SiR(3))Me, which occurs at a rate approaching the NMR time scale. Compounds 1a, 1b, 1d, and 7a adopt octahedral geometries in solution and the solid state with mutually cis silyl and hydride (or silyl and methyl) ligands. The longest Ru-P distance within a complex is always trans to Si, reflecting the strong trans influence of silicon. The aptitude of phosphine dissociation in these complexes has been probed in reactions of 1a, 1c, and 7a with PMe(3)-d(9) and CO. The dissociation is regioselective in the position trans to a silyl ligand (trans effect of Si), and the rate approaches the NMR time scale. A slower secondary process introduces PMe(3)-d(9) and CO in the other octahedral positions, most likely via nondissociative isomerization. The trans effect and trans influence in 7a are so strong that an equilibrium concentration of dissociated phosphine is detectable (approximately 5%) in solution of pure 7a. Compounds 1a-c also react with dihydrogen via regioselective dissociation of phosphine from the site trans to Si, but the final product, fac-(PMe(3))(3)Ru(SiR(3))H(3) (SiR(3) = SiMe(3), 4a; SiMe(2)CH(2)SiMe(3), 4b; SiEt(3), 4c), features hydrides cis to Si. Alternatively, 4a-c have been synthesized by photolysis of (PMe(3))(4)RuH(2) in the presence of a hydrosilane or by exchange of fac-(PMe(3))(3)Ru(SiR(3))H(3) with another HSiR(3). The reverse manifold - HH elimination from 4a and trapping with PMe(3) or PMe(3)-d(9) - is also regioselective (1a-d(9)() is predominantly produced with PMe(3)-d(9) trans to Si), but is very unfavorable. At 70 degrees C, a slower but irreversible SiH elimination also occurs and furnishes (PMe(3))(4)RuH(2). The structure of 4a exhibits a tetrahedral P(3)Si environment around the metal with the three hydrides adjacent to silicon and capping the P(2)Si faces. Although strong Si...HRu interactions are not indicated in the structure or by IR, the HSi distances (2.13-2.23(5) A) suggest some degree of nonclassical SiH bonding in the H(3)SiR(3) fragment. Thermolysis of 1a in C(6)D(6) at 45-55 degrees C leads to an intermolecular CD activation of C(6)D(6). Extensive H/D exchange into the hydride, SiMe(3), and PMe(3) ligands is observed, followed by much slower formation of cis-(PMe(3))(4)Ru(D)(Ph-d(5)). In an even slower intramolecular CH activation process, (PMe(3))(3)Ru(eta(2)-CH(2)PMe(2))H (5) is also produced. The structure of intermediates, mechanisms, and aptitudes for PMe(3) dissociation and addition/elimination of H-H, Si-H, C-Si, and C-H bonds in these systems are discussed with a special emphasis on the trans effect and trans influence of silicon and ramifications for SiC coupling catalysis.     

Structure and reactivity of bis(silyl) dihydride complexes (PMe(3))(3)Ru(SiR(3))(2)(H)(2): model compounds and real intermediates in a dehydrogenative C-Si bond forming reaction

A series of stable complexes, (PMe(3))(3)Ru(SiR(3))(2)(H)(2) ((SiR(3))(2) = (SiH(2)Ph)(2), 3a; (SiHPh(2))(2), 3b; (SiMe(2)CH(2)CH(2)SiMe(2)), 3c), has been synthesized by the reaction of hydridosilanes with (PMe(3))(3)Ru(SiMe(3))H(3) or (PMe(3))(4)Ru(SiMe(3))H. Compounds 3a and 3c adopt overall pentagonal bipyramidal geometries in solution and the solid state, with phosphine and silyl ligands defining trigonal bipyramids and ruthenium hydrides arranged in the equatorial plane. Compound 3a exhibits meridional phosphines, with both silyl ligands equatorial, whereas the constraints of the chelate in 3c result in both axial and equatorial silyl environments and facial phosphines. Although there is no evidence for agostic Si-H interactions in 3a and 3b, the equatorial silyl group in 3c is in close contact with one hydride (1.81(4) A) and is moderately close to the other hydride (2.15(3) A) in the solid state and solution (nu(Ru.H.Si) = 1740 cm(-)(1) and nu(RuH) = 1940 cm(-)(1)). The analogous bis(silyl) dihydride, (PMe(3))(3)Ru(SiMe(3))(2)(H)(2) (3d), is not stable at room temperature, but can be generated in situ at low temperature from the 16e(-) complex (PMe(3))(3)Ru(SiMe(3))H (1) and HSiMe(3). Complexes 3b and 3d have been characterized by multinuclear, variable temperature NMR and appear to be isostructural with 3a. All four complexes exhibit dynamic NMR spectra, but the slow exchange limit could not be observed for 3c. Treatment of 1 with HSiMe(3) at room temperature leads to formation of (PMe(3))(3)Ru(SiMe(2)CH(2)SiMe(3))H(3) (4b) via a CH functionalization process critical to catalytic dehydrocoupling of HSiMe(3) at higher temperatures. Closer inspection of this reaction between -110 and -10 degrees C by NMR reveals a plethora of silyl hydride phosphine complexes formed by ligand redistribution prior to CH activation. Above ca. 0 degrees C this mixture converts cleanly via silane dehydrogenation to the very stable tris(phosphine) trihydride carbosilyl complex 4b. The structure of 4b was determined crystallographically and exhibits a tetrahedral P(3)Si environment around the metal with the three hydrides adjacent to silicon and capping the P(2)Si faces. Although strong Si.HRu interactions are not indicated in the structure or by IR, the HSi distances (2.00(4) - 2.09(4) A) and average coupling constant (J(SiH) = 25 Hz) suggest some degree of nonclassical SiH bonding in the RuH(3)Si moiety. The least hindered complex, 3a, reacts with carbon monoxide principally via an H(2) elimination pathway to yield mer-(PMe(3))(3)(CO)Ru(SiH(2)Ph)(2), with SiH elimination as a minor process. However, only SiH elimination and formation of (PMe(3))(3)(CO)Ru(SiR(3))H is observed for 3b-d. The most hindered bis(silyl) complex, 3d, is extremely labile and even in the absence of CO undergoes SiH reductive elimination to generate the 16e(-) species 1 (DeltaH(SiH)(-)(elim) = 11.0 +/- 0.6 kcal x mol(-)(1) and DeltaS(SiH)(-)(elim) = 40 +/- 2 cal x mol(-)(1) x K(-)(1); Delta = 9.2 +/- 0.8 kcal x mol(-)(1) and Delta = 9 +/- 3 cal x mol(-)(1).K(-)(1)). The minimum barrier for the H(2) reductive elimination can be estimated, and is higher than that for silane elimination at temperatures above ca. -50 degrees C. The thermodynamic preferences for oxidative additions to 1 are dominated by entropy contributions and steric effects. Addition of H(2) is by far most favorable, whereas the relative aptitudes for intramolecular silyl CH activation and intermolecular SiH addition are strongly dependent on temperature (DeltaH(SiH)(-)(add) = -11.0 +/- 0.6 kcal x mol(-)(1) and DeltaS(SiH)(-)(add) = -40 +/- 2 cal.mol(-)(1) x K(-)(1); DeltaH(beta)(-CH)(-)(add) = -2.7 +/- 0.3 kcal x mol(-)(1) and DeltaS(beta)(-CH)(-)(add) = -6 +/- 1 cal x mol(-)(1) x K(-)(1)). Kinetic preferences for oxidative additions to 1 - intermolecular SiH and intramolecular CH - have been also quantified: Delta = -1.8 +/- 0.8 kcal x mol(-)(1) and Delta = -31 +/- 3 cal x mol(-)(1).K(-)(1); Delta = 16.4 +/- 0.6 kcal x mol(-)(1) and Delta = -13 +/- 6 cal x mol(-)(1).K(-)(1). The relative enthalpies of activation (-)(1) x K(-)(1)). Kinetic preferences for oxidative additions to 1 - intermolecular SiH and intramolecular CH - have been also quantified: Delta (H)SiH(add) = 1.8 +/- 0.8 kcal x mol(-)(1) and Delta S((SiH-add) =31+/- 3 cal x mol(-)(1) x K(-)(1); Delta S (SiH -add) = 16.4 +/- 0.6 kcal x mol(-)(1) and =Delta S (SiH -CH -add) =13+/- 6 cal x mol(-)(1) x K(-)(1). The relative enthalpies of activation are interpreted in terms of strong SiH sigma-complex formation - and much weaker CH coordination - in the transition state for oxidative addition.     

Simple and efficient chemoselective mild deprotection of acetals and ketals using cerium(III) triflate

A new and chemoselective method for the cleavage of alkyl and cyclic acetals and ketals at room temperature in wet nitromethane by using catalytic cerium(III) trifluoromethane sulfonate is presented. The high yields, the observed selectivity, the very gentle reaction conditions, and the almost neutral pH make this procedure particularly attractive for multistep synthesis.     

Inherently Chiral Macrocyclic Oligothiophenes: Easily Accessible Electrosensitive Cavities with Outstanding Enantioselection Performances

Linear conjugated oligothiophenes of variable length and different substitution pattern are ubiquitous in technologically advanced optoelectronic devices, though limitations in application derive from insolubility, scarce processability and chain‐end effects. This study describes an easy access to chiral cyclic oligothiophenes constituted by 12 and 18 fully conjugated thiophene units. Chemical oxidation of an “inherently chiral” sexithiophene monomer, synthesized in two steps from commercially available materials, induces the formation of an elliptical dimer and a triangular trimer endowed with electrosensitive cavities of different tunable sizes. Combination of chirality with electroactivity makes these molecules unique in the current oligothiophenes literature. These macrocycles, which are stable and soluble in most organic solvents, show outstanding chiroptical properties, high circularly polarized luminescence effects and an exceptional enantiorecognition ability.     

An eco-friendly tandem tosylation/Ferrier N-glycosylation of amines catalyzed by Er(OTf)3 in 2-MeTHF

Er(OTf)₃ in 2-MeTHF provides a new and eco-friendly process for Ferrier glycosylation of sulfonamides and amino acids with various N-nucleophiles.The stereoselective synthesis of 2,3-unsaturated-N-pseudoglycals was carried out with 3,4,6-tri-O-acetyl-d-glucal and different nucleophiles affording good results in a short time.     

Molecular modelling and enzymatic studies of acetylcholinesterase and butyrylcholinesterase recognition with paraquat and related compounds

The potent herbicide paraquat and three other analogues MPP+, MPDP+ and MPTP have a known toxicological profile linked to the ability to damage dopaminergic neurons. Other biological effects were recently addressed to this class of compounds, including the ability to interact with enzymatic targets involved in the Central Nervous System, such as the acetylcholinesterase (AChE) and the butyrylcholinesterase (BuChE). A combined molecular modelling and enzymatic study focusing onto their interaction against the AChE and BuChE is reported. The former study was performed by docking techniques using target known co-crystallographic models. The latter study was carried out by the widely adopted Ellman's method. In both studies the anti-Alzheimer FDA approved drug tacrine was used as reference inhibitor. Our results indicate that paraquat, MPTP, MPDP+ and MPP+ recognize both enzymatic cleft in a similar fashion compared to the reference inhibitor. A structure-activity correlation was found with the net charge of the ligands, indicating a major role of the electrostatic term in the recognition and inhibition of these compounds. Our data completed their enzymatic profile, added new information on the molecular mechanisms underlying their neurotoxicity useful for the rational design of new cholinesterase inhibitors.     

Participation of the nucleobases in the regioselective backbone fragmentation of nucleic acids. A molecular dynamics and tandem mass spectrometric investigation on a model dinucleoside phosphotriester

The anions (I–III) obtained from O-methyl 5′-O-(5′-deoxythymidine) 3′-O-(2′,3′-dideoxyuridine) phosphate by the competitive removal of the 3-N-H protons of the nucleobases and of the methyl group from the phosphotriester bond, assume in the gas phase stable conformations as a function of their charge site. The mass-analyzed ion kinetic energy (MIKE) spectra of I and III show that the regioselective backbone cleavage of the internucleotidic linkage is controlled by the 2′-H proton transfer to the nucleobase within the 5′-end nucleoside. Similar pathways are taken by species II when the nucleobase is eliminated as neutral from the 5′-end nucleoside.