Indirect simultaneous kinetic determination of semicarbazide and hydrazine in micellar media by H-point standard addition method

H-point standard addition method (HPSAM) is suggested as a simple and selective method for the determination of semicarbazide and hydrazine. The reduction of Cu²⁺ to Cu⁺ by semicarbazide and hydrazine in the presence of neocuproine (Nc) and the subsequent complex formation between Cu⁺ and Nc produced a sensitive spectrophotometric method for indirect determination of semicarbazide and hydrazine. The difference in the rate of reduction of Cu²⁺ with semicarbazide and hydrazine in cationic micellar media is the basis of this method. Semicarbazide can be determined in the range of 0.5-3.75 μg ml⁻¹ with satisfactory accuracy and precision in the presence of excess hydrazine. The proposed method was successfully applied to the simultaneous determination of semicarbazide (0.5-3.75 μg ml⁻¹) and hydrazine (0.5-5 μg ml⁻¹) and also to the selective determination of semicarbazide in the presence of hydrazine in several synthetic mixtures containing different concentration ratios of semicarbazide and hydrazine.     

Near-field measurement of amplitude and phase in silicon waveguides with liquid cladding

Heterodyne near-field scanning optical microscopy (H-NSOM) has proven useful as a tool for characterization of both amplitude and phase of on-chip photonic devices in air, but it has previously been unable to characterize devices with a dielectric overcladding, which is commonly used in practice for such devices. Here we demonstrate H-NSOM of a silicon waveguide with a liquid cladding emulating the solid dielectric. This technique allows characterization of practical devices with realistic refractive index profiles. Fourier analysis is used to estimate the effective refractive index of the mode from the measured data, showing an index shift of 0.08 from air to water cladding, which is seen to correspond well to simulations.     

Effect of variable viscosity and viscous dissipation on the Hagen‐Poiseuille flow and entropy generation

In this article, the steady‐state flow of a Hagen‐Poiseuille modelin a circular pipe is considered and entropy generation due tofluid friction and heat transfer is examined. Because of variationin fluid viscosity, the entropy generation in the flow varies. Inhis model, Arrhenius law is applied for temperature equation‐dependent viscosity, and the influence of viscosity parameters on the entropy generation number and distribution of temperature and velocity is investigated. The governing momentum and energy equations, which are coupled due to the dissipative term in the energy equation, were solved by analytical techniques. The solutions of equations via perturbation method and homotopy perturbation method are obtained and then compared with those of numerical solutions. It is found that the fluid viscosity influences considerably the temperature distribution in the fluid close to the pipe wall, and increasing pipe wall temperature enhances the rate of entropy generation. © 2009 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 27: 529–540, 2011     

Compact chip-scale filter based on curved waveguide Bragg gratings

We propose a method for miniaturization of filters based on curved waveguide Bragg gratings, so that long structures can be packed into a small area on a chip. This eliminates the stitching errors introduced in the fabrication process, which compromise the performance of long Bragg gratings. Our approach relies on cascading curved waveguide Bragg gratings with the same radius of curvature. An analytical model for the analysis of these devices was developed, and a filter based on this model was designed and fabricated in a silicon on insulator platform. The filter had a total length of 920μm, occupied an area of 190μm×114μm, and exhibited a stop band of 1.7nm at 1.55μm and an extinction ratio larger than 23dB.     

Optical detection of phenolic compounds based on the surface plasmon resonance band of Au nanoparticles

An indirect colorimetric method is presented for detection of trace amounts of hydroquinone (1), catechol (2) and pyrogallol (3). The reduction of AuCl4(-) to Gold nanoparticles (Au-NPs) by these phenolic compounds in the presence of cetyltrimethylammonium chloride (CTAC) produced very intense surface plasmon resonance peak of Au-NPs. The plasmon absorbance of Au-NPs allows the quantitative colorimetric detection of the phenolic compounds. The calibration curves derived from the changes in absorbance at lambda = 568 nm were linear with concentration of hydroquinone, catechol and pyrogallol in the range of 7.0 x 10(-7) to 1.0 x 10(-4)M, 6.0 x 10(-6) to 2.0 x 10(-4)M and 6.0 x 10(-7) to 1.0 x 10(-4)M, respectively. The detection limits were 5.3 x 10(-7), 2.5 x 10(-6) and 3.2 x 10(-7)M for the hydroquinone, catechol and pyrogallol, respectively. The method was applied satisfactorily to the determination of phenolic compounds in water samples and pharmaceutical formulations.     

Trace determination of EDTA from water samples using dispersive liquid–liquid microextraction coupled with HPLC-DAD

Dispersive liquid–liquid microextraction (DLLME) in conjunction with high-performance liquid chromatography-diode array detection (HPLC-DAD) has been applied to the extraction and determination of EDTA in sediments and water samples. The effect of extraction, nature and volume of disperser solvent, pH value of sample solution, extraction time and extraction temperature were investigated. Under the optimal conditions the analytical range of EDTA was from 3.0 to 50.0 μg L^?1 with a correlation coefficient of 0.9982 and a detection limit of 1.7 μg L^?1. The relative standard deviation (RSD) was less than 5.4% (n?=?5), and the recovery values were in the range of 89–95%. The simplicity, high enrichment, high recovery and good repeatability are the main advantages of the method presented. The DLLME-HPLC-DAD method was successfully applied to the analysis of EDTA in aqueous samples.     

Kinetic Study of the Electro‐Catalytic Oxidation of Acetaldehyde on Copper Electrode

Electrocatalytic oxidation of acetaldehyde was investigated on a copper electrode in alkaline solution. The process of oxidation involved and its kinetics were established by using cyclic voltammetry and chronoamperometry techniques as well as steady state polarization measurements. It has been found that in the course of an anodic potential sweep the electro‐oxidation of acetaldehyde follows the formation of Cu(III) and is catalysed by this species through a mediated electron transfer mechanism. A mechanism based on the electrochemical generation of Cu(III) active sites and their subsequent consumption by the acetaldehyde in question was also investigated.     

‘Click Synthesis’ of Some Novel O‐Substituted Oximes Containing 1,2,3‐Triazole‐1,4‐diyl Residues as New Analogs of β‐Adrenoceptor Antagonists

The ‘click synthesis’ of some novel O‐substituted oximes, 7a – 7t , which contain 1,2,3‐triazolediyl residues, as new analogs of β‐adrenoceptor antagonists is described (Schemes 1–4). The synthesis of these compounds was achieved in four to five steps. The formation of oximes of 9H‐fluoren‐9‐one and benzophenone, i.e., 9a and 9b , respectively, followed by their reaction with propargyl bromide, afforded O‐propargyl oximes 10a and 10b , respectively, which by a subsequent CuI‐catalyzed Huisgen cycloaddition with prepared β‐azido alcohols 11a – 11j (Schemes 2 and 3), led to the target compounds 7a – 7t in good yields.     

Hypergroups and polygroups in diffeology

Abstract

We introduce diffeological algebraic hyperstructures such as diffeological hypergroups and diffeological polygroups, which are generalizations of diffeological groups. After providing some examples of these notions, we investigate the relationships between diffeological hypergroups and diffeological groups. It is proved that there is an equivalence of categories between subductions over diffeological groups and diffeological complete hypergroups. We finally show how every diffeological polygroup is a subpolygroup of a diffeological poly-monoid of hyper-diffeomorphisms.

Communicated by J. L. Gomez Pardo