An Ab Initio Study and NBO Analysis of the Stability and Conformational Properties of Hexakis(trimethylelementhyl)benzene (Element = C,Si, Ge,and Sn)

Ab initio molecular orbital and density functional theory were used to investigate energetic and structural properties of the various conformations of hexa-tertbutylbenzene (1), hexakis(trimethylsilyl)benzene (2), hexakis (trimethylgermyl)benzene (3), and hexakis(trimethylstannyl)benzene (4). HF/3-21G//HF/3-21G and B3LYP/3-21G//HF/3-21G results revealed that the Twist-Boat (TB) conformer of compound 1 is more stable than the 1-Chair (C), 1-Boat (B), and 1-Planar (P) conformers. B3LYP/3-21G//HF/3-21G results show that the 1- TB conformer is more stable than 1- C, 1- B, and 1- P conformers of about 1.13, 4.34, and 99.94 kcal mol^?1 , respectively. Contrary to the stability order of compound 1 conformers, the C conformer of compounds 2–4 is more stable than TB, B, and P conformations, as calculated by B3LYP/3-21G//HF/3-21G and HF/3-21G//HF/3-21G levels of theory. The energy gap between the C and P conformers in compounds 1–4 is decreased in the following order: ΔE(4: C, P) < ΔE (3: C, P) < ΔE(2: C, P) < ΔE (1: C, P). This fact can be explained in terms of the increase of C _aromatic -M (M═C, Si, Ge, and Sn) bond lengths and the decrease of steric (van der Waals) repulsions in the previously discussed compounds. For compounds 1–3, the calculations were also performed at the B3LYP/ 6-31G*//HF/3-21G level of theory. However, the comparison showed that the results at B3LYP/3-21G//HF/3-21G methods correlated well with those obtained at the B3LYP/6-31G*// HF/6-31G method. Further, NBO analysis revealed that in compounds 1–4, the resonance energy associated with the σ_M-C1 to σ*_C2-C3 delocalization is 5.20, 9.68, 11.15, and 12.27 kcal mol^?1, respectively. These resonance energy values could explain the easiness of the ring flipping processes of C, B, and TB conformers of compounds 4 to 1. Also, the NBO results showed that by an increase of the σ_M-C1 → σ *_C2-C3 resonance energies in compounds 1–4, the σ_M-C1 bonding orbital occupancies decrease. This fact could fairly explain the increase of the C_aryl-M bond length from compound 1 to 4. The NBO results are also in good agreement with the calculated energy barriers for the ring flipping of the chair conformations in compounds 1–4, as calculated by B3LYP and HF methods.     

An extended slacks-based measure model for data envelopment analysis with negative data

Data envelopment analysis (DEA) is a non-parametric approach based on linear programming that has been widely applied for evaluating the relative efficiency of a set of homogeneous decision-making units (DMUs) with multiple inputs and outputs. The original DEA models use positive input and output variables that are measured on a ratio scale, but these models do not apply to the variables in which negative data can appear. However, with the widespread use of interval scale data and undesirable data, the emphasis has been directed towards the simultaneous consideration of the positive and negative data in DEA models. In this paper, using the slacks-based measure, we propose an extended model to evaluate the efficiency of DMUs, even if some variables are measured on an interval scale and some on a ratio scale. Moreover, the extended model allows for the presence of all interval-scale variables, which are capable of taking both negative and positive values.     

Iron Oxychloride/Bovine Serum Albumin Nanosheets as Chemodynamic Therapy Agents

Iron oxychloride (FeOCl) is known for reactive oxygen species (ROS) generation through Fenton chemistry. The activity of FeOCl is preserved in the slightly acidic pH value of the tumor microenvironment (pH 6.5−6.9). Such property can be advantageous in biobased systems, where ROS generation can be modulated in slightly acidic conditions, which is characteristic of the solid tumor microenvironment. In the present study, BSA-stabilized FeOCl nanosheets (NSs) are synthesized and characterized by transmission electron microscope, Fourier transform infrared spectroscopy, zeta potential analysis, dynamic light scattering, and UV–vis spectroscopy. The morphology of the nanoparticles is flake-like, and their hydrodynamic diameter is around 200 nm. MTT, apoptosis assay, and trypan blue staining evaluate the toxicity of FeOCl NSs toward the 4T1 cell line. It is found that the toxicity of the NSs is higher in physiological conditions of solid tumors (pH 6.5, H₂O₂ 100 × 10⁻⁶ m ) than in the conditions of healthy organs (pH 7.4). Specifically, cancer cells are in their late apoptotic stage by more than eight times higher at pH 6.5 than pH 7.4. The toxicity results are in agreement with the in vitro catalytic assay of the NSs. Therefore, the FeOCl NSs can be the building blocks for constructing chemodynamic therapy agents.     

Investigation on the dynamics of electron transport and recombination in TiO2 nanotube/nanoparticle composite electrodes for dye-sensitized solar cells

In this work, we report on fabrication and characterization of dye-sensitized solar cells based on TiO(2) nanotube/nanoparticle (NT/NP) composite electrodes. TiO(2) nanotubes were prepared by anodization of Ti foil in an organic electrolyte. The nanotubes were chemically separated from the foil, ground and added to a TiO(2) nanoparticle paste, from which composite NT/NP electrodes were fabricated. In the composite TiO(2) films the nanotubes existed in bundles with a length of a few micrometres. By optimizing the amount of NT in the paste, dye-sensitized solar cells with an efficiency of 5.6% were obtained, a 10% improvement in comparison to solar cells with pure NP electrodes. By increasing the fraction of NT in the electrode the current density increased by 20% (from 11.1 to 13.3 mA cm(-2)), but the open circuit voltage decreased from 0.78 to 0.73 V. Electron transport, lifetime and extraction studies were performed to investigate this behavior. A higher fraction of NT in the paste led to more and deeper traps in the resulting composite electrodes. Nevertheless, faster electron transport under short-circuit conditions was found with increased NT content, but the electron lifetime was not improved. The electron diffusion length calculated for short-circuit conditions was increased 3-fold in composite electrodes with an optimized NT fraction. The charge collection efficiency was more than 90% over a wide range of light intensities, leading to improved solar cell performance.     

Detection of acetone in the human breath as diabetes biomarker based on PPy/WO3 nanocomposite sensor by FFT continuous cyclic voltammetry method

This research represents a novel detection method of acetone level in the exhaled breath samples (RH=88 %) based on polypyrrole/tungsten oxide (PPy/WO₃) nanocomposite sensor. The PPy/WO₃ sensor was fabricated by the deposition of nanocomposite on/between interdigitated electrodes (IDEs) through electrospray coating and was then characterized by FE-SEM imaging. In this detection method, the coulometric signal of the sensor was calculated using Fast Fourier Continuous Cyclic Voltammetry (FFTCCV), where cyclic voltammetry (CV) was applied to the sensor in the defined potential rang and then charge changes of the sensor was obtained by integration of the current in all scanned potential ranges. FFTCCV method enhances the sensitivity of the sensor when exposed to the gas mixtures containing acetone. In addition to its fast coulometric response time (≤5 s) in the two linear ranges of 0.7–2.8 ppm and 2.8–28.2 ppm (R²=0.99), FFTCCV method provides the low detection limit of 70 ppb, and high sensitivity toward acetone at the optimum values of the parameters. The fabricated sensor showed great selectivity toward acetone when exposed to humid air and some exhaled gas like carbon dioxide, ammonia, methanol, ethanol and alkyl amines. The results were very satisfying as the sensor was capable to detect different acetone levels in human exhaled breath as non-invasive diagnosis of diabetes with a good correlation (R²≃0.9) to the routine blood sugar test taken by different commercial glucometers results.     

High‐mobility solution‐processed zinc oxide thin films on silicon nitride

A high effective electron mobility of 33 cm² V^–1 s^–1 was achieved in solution‐processed undoped zinc oxide (ZnO) thin films. The introduction of silicon nitride (Si₃N₄) as growth substrate resulted in a mobility improvement by a factor of 2.5 with respect to the commonly used silicon oxide (SiO₂). The solution‐processed ZnO thin films grown on Si₃N₄, prepared by low‐pressure chemical vapor deposition, revealed bigger grain sizes, lower strain and better crystalline quality in comparison to the films grown on thermal SiO₂. These results show that the nucleation and growth mechanisms of solution‐processed films are substrate dependent and affect the final film structure accordingly. The substantial difference in electron mobilities suggests that, in addition to the grain morphology and crystalline structure effects, defect chemistry is a contributing factor that also depends on the particular substrate. In this respect, interface trap densities measured in high‐κ HfO₂/ZnO MOSCAPs were about ten times lower in those fabricated on Si₃N₄ substrates. (© 2014 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)