Acidic ionic liquids catalyst in homo and graft polymerization of ε-caprolactone

Biodegradable polycaprolactone was prepared by ring-opening polymerization in presence of ionic liquids as efficient, inexpensive, nontoxic, and easily handled acid catalysts. The resulting polymer exhibited good yield and inherent viscosity between 0.10 and 0.18 dL/g. The chemical structure of obtained polymer was verified by the ¹H-NMR and Fourier transform infrared spectroscopy (FT-IR) spectra. In continuation, the obtained polymer was applied to improve quality level and mechanical properties and also to reduce the hydrophilic properties of the starch, so the ring-opening polymerization of ε-caprolactone was investigated in the presence of starch hydroxyl groups as initiator and ionic liquid as catalyst. The obtained starch-grafted-polycaprolactone was verified by ¹H-NMR, FT-IR spectra, and field emission scanning electron microscopy analysis.     

Ni(II), Co(II), and Cu(II) complexes incorporating 2-pyrazinecarboxylic acid：Synthesis,characterization, electrochemical evaluation,and catalytic activity for the synthesis of 2H-indazolo[2,1-b]phthalazine-triones

Three complexes containing 2-pyrazinecarboxylate (pzca–), including [Ni(pzca)2(H2O)2], [Co(pzca)2(H2O)2], and [Cu(pzca)2(H2O)2], have been synthesized and characterized using physico-chemical and spectroscopic methods. Furthermore, the structure of each complex was determined by single-crystal X-ray diffraction. All three complexes have an octahedral geometry, where the metal ion chelated by two carboxylate oxygens, two nitrogen atoms belonging to pyrazinic acid molecules, and two oxygen atoms of two water molecules. The catalytic activities of these complex-es were also investigated in the green synthesis of 2H-indazolo[2,1-b]phthalazine-triones by the reaction of hydrazine hydrate with an arylaldehyde, phthalic anhydride, and dimedone in acetic acid.     

A microextraction procedure based on a task‐specific ionic liquid for the separation and preconcentration of lead ions from red lipstick and pine leaves

First, the extraction and preconcentration of ultratrace amounts of lead(II) ions was performed using microliter volumes of a task‐specific ionic liquid. The remarkable properties of ionic liquids were added to the advantages of microextraction procedure. The ionic liquid used was trioctylmethylammonium thiosalicylate, which formed a lead thiolate complex due to the chelating effect of the ortho‐positioned carboxylate relative to thiol functionality. So, trioctylmethylammonium thiosalicylate played the roles of both chelating agent and extraction solvent simultaneously. Hence, there is no need to use a ligand. The main parameters affecting the efficiency of the method were investigated and optimized. Under optimized conditions, this approach showed a linear range of 2.0–24.0 ng/mL with a detection limit of 0.0010 ng/mL. The proposed method was applied to the extraction and preconcentration of lead from red lipstick and pine leaves samples prior to electrothermal atomic absorption spectroscopic determination.     

Microchip electrophoresis for specific gene detection of the pathogenic bacteria V. cholerae by circle-to-circle amplification.

We have developed a new method for a fast and precise analysis of circle-to-circle amplification (C2CA) product for specific gene detection by microchip electrophoresis. In this method, we have added a new enzymatic step to the C2CA reaction, which could be carried out isothermally at 37 degrees C. Compared to the original single-stranded DNA, the double-stranded DNA that is produced by this enzymatic reaction is more reliable for analysis by microchip electrophoresis. C2CA product was detected within 55 s with high reproducibility by this method which was successfully applied to the detection of 10-ng genomic DNA of the pathogenic bacteria Vibrio. cholerae within 110 s. Purification was found to be an indispensable step for the analysis of the C2CA product of genomic DNA samples.     

A novel sodium carbonate-catalyzed regioselective synthesis of pyrano[2,3-h]coumarins using a three-component reaction

In this work, a novel, convenient, and efficient approach to the synthesis of pyrano[2,3-h]coumarins has been reported based on the multicomponent reaction. The one-pot reaction between 5,7-dihydroxy-4-methylcoumarin, dialkyl acetylenedicarboxylate and aromatic aldehydes catalyzed by sodium carbonate lead to the formation of a novel class of pyrano[2,3-h]coumarin derivatives. High atom-economy, excellent yields, simple procedure, and mild reaction conditions are the important features of this protocol. This method allows access to a variety of pyrano[2,3-h]coumarins via using a broad substrate scope.     

preconcentration and determination of amoxicillin and ceftriaxone in hospital sewage using vortex-assisted liquid-phase microextraction based on the solidification of the deep eutectic solvent followed by HPLC–UV

In the present study, a new method for extraction and preconcentration of amoxicillin and ceftriaxone was used in hospitalised sewage samples, called vortex-assisted liquid-phase microextraction based on the solidification of deep eutectic solvent. Samples were analysed by high-performance liquid chromatography–ultraviolet detection after preparation and extraction. In this method, the new deep eutectic solvent is used as the extraction solvent, which is obtained from the combination of 1-decyl-3-methylimidazolium chloride and n-butanoic acid. The important advantages of this novel extraction solvent include material stability, low density and good freezing point near room temperature. Under the optimum conditions, enrichment factors are in the range of 164–172. Repeatability and reproducibility of the method based on seven replicate measurements of 50.0 µg L^?1 of the target analytes in analysed samples were in the range of 2.1–3.5% and 3.8–5.2%, respectively. The limit of detections and linearity are in the range of 0.005–0.10 and 3–600 µg L^?1, respectively. The method was successfully applied for the determination of amoxicillin and ceftriaxone in the real sewage samples. The relative recoveries of sewage samples spiked with amoxicillin and ceftriaxone are 91–107%.     

Free vibration and stability of an axially moving thin circular cylindrical shell using multiple scales method

This paper investigates the linear free vibration of axially moving simply supported thin circular cylindrical shells with constant and time-dependent velocity considering the effect of viscous structure damping. Classical shell theory is employed to express strain-displacement relation. Linear elasticity theory is used to write stress–strain relation considering Hook’s Law. Governing equations in cylindrical coordinates are derived using the Hamilton principle. Equilibrium equations are rewritten with the help of Donnell–Mushtari shell theory simplification assumptions. Motion equations for displacements in axial and circumferential directions are solved analytically concerning to displacement in the radial direction. As the displacement in the radial direction is the combination of driven and companion modes, the third motion equation is discretized using the Galerkin method. The set of ordinary differential equation obtained from the Galerkin method is solved using the steady-state method, which in practice leads to the prediction of the exact frequencies of vibration. By employing multiple scale method the critical speed values of a circular cylindrical shell and several types of instabilities are discussed. The numerical results show that by increasing the mean velocity, the system always loses stability by the divergence instability in different modes, and the critical speed values of lower modes are higher than those of higher modes. As well as the unstable regions for the resonances between velocity function fluctuation frequencies and the linear combination of natural frequencies is gained from the solvability condition of second order multiple scale method. The accuracy of the method is checked against the available data.

     

Kinetic study of hydrogen sulfide decomposition on Pt(111) surface

In this work, kinetic of H₂S conversion to H₂ molecule on the surface of Pt(111) is studied using kinetic Monte Carlo simulation. The results of simulation were fitted to the experimental temperature-programed desorption spectra. The good agreement between the empirical and the simulated data confirms the proposed mechanism and kinetic data (activated energies and pre-exponential factors). The influence of variables such as temperature and concentrations of H₂S and H₂ on the overall results of hydrogen production is studied. The condition is proposed in which the best yield of reaction at minimum temperature is obtained. Results show that platinum is a perfect catalyst for converting H₂S to H₂ and it has a perfect performance (98%) after 5 μs at low temperature of 227°C.     

A comparative study on capability of emulsion models for predicting the viscoelastic behavior of ternary polymer blends with core-shell morphology

Rheologica Acta - The goal of this study was to find a way to apply existing constitutive viscoelastic models on ternary polymer blends forming core-shell morphology. An attempt was also made to...     

Polypyrrole/Fe3O4/CNT as a recyclable and highly efficient catalyst for one‐pot three‐component synthesis of pyran derivatives

Polypyrrole (PPY)/Fe₃O₄/CNT has been synthesized and characterized by FT‐IR, TEM and SEM techniques and its catalytic activity has been evaluated in the synthesis of several series of pyran derivatives. Tetrahydrobenzo[b]pyranes, 4H‐pyran‐3‐carboxylates, 4H,5H‐pyrano[3,2‐c]chromenes and dihydropyrano[2,3‐c]pyrazoles have been successfully prepared from one‐pot three‐component condensation of aldehyde, malononitrile and active methylene‐containing compounds (dimedone /ethyl acetoacetate/4‐hydroxycoumarin/3‐methyl‐2‐pyrazoline‐5‐one) using PPY/Fe₃O₄/CNT as a new and reusable heterogeneous catalyst. The present method offer several advantages such as; high yields of products, short reaction times, easy work‐up procedure and easy separation of the catalyst from the reaction mixture due to its magnetic character. Furthermore, chemoselective synthesis of bis‐benzo[b]pyran from terephthalaldehyde can be achieved by this method.