Organization of nanoscale objects via polymer demixing

We present an extremely versatile method for the lateral organization of nano-scale objects (NOs) based on the phenomenon of polymer demixing. NOs are suspended in a solution of two immiscible polymers, which is used to form a thin polymer film by spin coating. During spin coating the two polymers separate to give a microphase structure, whose length scale depends on the experimental conditions. The NOs spontaneously partition into one or other of the polymer phases resulting in their lateral organization. In this work, the organization of CdSe nanoparticles and fluorescent organic dyes was studied by fluorescence microscopy. The NOs were organized in the polymer film in stochastic patterns or in ordered designs on substrates pre-patterned by soft-lithography techniques. Single-particle measurements, using confocal microscopy, showed that at low concentrations there was little aggregation of the particles.     

Electronic spectrum and magnetic properties of the Ni(II) telluromolybdate

The room temperature electronic (reflectance) spectrum and the magnetic properties of NiTeMoO₆ in the temperature range 100 – 300 K were investigated in order to obtain a wider insight into the structural properties of the M^IITeMoO₆-type telluromolybdates. The results show that Ni(II) is located in a distorted octahedral environment and that there are important orbital contributions to the magnetic moment. Some data for CdTeMoO₆ and CoTeMoO₆ are also reported.     

Vanadium in Italian waters: monitoring and speciation of V(IV) and V(V)

In this work, a highly sensitive method was developed to separate vanadium (IV) from vanadium (V), which are both contained in water at trace levels. A suitable strong anionic exchange column (SAX) loaded with disodium ethylendiaminetetraacetic acid (Na₂EDTA) was used to trap both vanadium species dissolved in 10–100 ml of water at pH 3. The vanadyl ion was selectively eluted by means of 15 ml of an aqueous solution containing Na₂EDTA, tetrabutylammonium hydroxide (TBA⁺OH⁻), and isopropanol (ⁱPr-OH) and was subsequently determined by atomic absorption spectroscopy with electrothermal atomization. The concentration of vanadate ion was calculated by subtracting the vanadyl concentration from the total concentration of vanadium. The optimal conditions for a selective elution were evaluated. The recovery of vanadium (IV) was 95% or better. The proposed method provides a simple procedure for the speciation of vanadium in aqueous matrices. The collection of the two forms could easily be carried out at the sampling site. Therefore, the risk of changing the concentration ratio between vanadium species was widely reduced. The detection limits were 1 μg/l for both species, when a 10-ml sample was eluted through the column. The method was applied successfully to vanadium speciation on different kinds of Italian volcanic water: Mount Etna (Sicily), Lake Bracciano and Castelli Romani (Latium).     

The influence of nanoparticle fillers on the morphology of a spin-cast thin film polymer blend

Polymer/nanoparticle composite films are receiving growing attention thanks to their potential for application in ultra-thin electronic and optical devices. Polymer blend demixing has been shown to be a suitable technique for the structuring of polymer thin films and the patterning of nanoparticles (NP) within them. In this work we show that the morphology of thin polymer films made by spin-casting a polymer blend solution containing NP fillers on a surface depends strongly on the concentration of NP fillers. More specifically, polystyrene/polymethylmethacrylate (PS/PMMA) films formed from a toluene solution, and which demix following a nucleation and growth mechanism, were studied. It was found that both the height and the surface density of PMMA domains increased as the concentration of CoPt:Cu NPs in the film was increased. We find that similar effects are induced in a NP-free PS/PMMA demixed film upon increasing the molecular weight of the PS molecules. This suggests that under certain conditions the NPs and the polymer molecules in the blend do not behave as separate species but form aggregates.     

Small-scale method for the determination of selected organochlorine pesticides in soil

A small-scale method was developed for the simultaneous determination of gamma-HCH, heptachlor, aldrin, dicofol, mirex, endosulfan I, endosulfan II and endosulfan sulphate in soil. The extraction and clean-up steps were combined into one step by transferring soil samples to chromatographic columns prepacked with neutral alumina. The pesticides elution was processed with n-hexane : dichloromethane (7 : 3) and the concentrated eluate was analysed using gas-liquid chromatography with electron capture detection. Analyses of the "in vitro" fortified samples with the selected pesticides were performed at three different levels. Mean recoveries for aldrin, gamma-HCH and heptachlor, at levels of 2, 10 and 20 ng/g, ranged from 71 to 87%; for dicofol, at levels of 8, 40 and 80 ng/g, ranged from 97 to 103%; for endosulfan I and II, at levels of 5, 25 and 50 ng/g, ranged from 88 to 96%; for mirex, at levels of 6, 30 and 60 ng/g, ranged from 86 to 110%; and for endosulfan sulphate, at levels of 15, 75 and 150 ng/g, ranged from 93 to 104%. The method can be used for rapid determination of these pesticides in soil.     

A simplified method for the determination of fenpropathrin residues in fruits

Summary A simple and efficient method is described for the determination of fenpropathrin in oranges, pears, apples and strawberries. The procedure is based on the extraction of each homogenized fruit sample with hexane:acetone (1∶1, v/v) mixture, followed by a cleanup technique on a column packed with florisil, using a hexane:ethyl ether (7∶3, v/v) mixture, and gas chromatographic analysis with electron capture detection (ECD). The fortification levels (0.5;1.0;2.0 mg kg⁻¹) were selected according to the maximum residue limits (MRLs) established for fenpropathrin by Brazilian legislation. Mean recoveries from five replicates of fortified fruit samples ranged from 83 % to 98%, with coefficients of variation from 1.4 to 13.5 and detection limits varying from 0.1 to 0.2 mg kg⁻¹.     

The effect of substituents on the phenyl portion of the imido ligand on the structure and properties of molybdenum(VI) imido complexes

Anilines with alkyl substituents on the phenyl ring (ArNH2 = 2,4,6-trimethylaniline; 2,3-, 2,4-, 2,6-, and 3,4-dimethylaniline; and 2,6-diisopropylaniline) react with MoO(X)2(dtc)2 (X = Cl or Br; dtc = diethyldithiocarbamate) in methanol in the presence of 2 equiv of triethylamine to form ionic imido complexes of the type [MoNAr(dtc)3]2[Mo6O19] or MoNAr(dtc)3]4[Mo8O26]. The same reaction in THF with butyllithium as base yields imido complexes of the type MoNAr(X)2(dtc)2. The structures of three ionic, five chloro, and two bromo complexes have been determined by X-ray crystallography. In all complexes, the molybenum center is a distorted pentagonal bipyramid. While the structures are similar, the angles of the imido linkages differ. The effect of the substituents on the phenyl ring of the imido ligand on the 95Mo NMR chemical shifts was determined. The Mo nucleus becomes more deshielded with the substituents in the following order: 3,4-Me2 < 2,3-Me2 < 2,4-Me2 < 2,6-Me2 < 2,4,6-Me3 < 2,6 isopropyl. Complexes with more deshielded 95Mo centers tend to have angles of the imido linkage that are closer to 180 degrees.     

Synchronization and functional central limit theorems for interacting reinforced random walks

We obtain Central Limit Theorems in Functional form for a class of time-inhomogeneous interacting random walks. Due to a reinforcement mechanism and interaction, the walks are strongly correlated and converge almost surely to the same, possibly random, limit. We study random walks interacting through a mean-field rule and compare the rate they converge to their limit with the rate of synchronization, i.e. the rate at which their mutual distances converge to zero. We show that, under certain conditions, synchronization is faster than convergence. Even if our focus is on theoretical results, we propose as main motivations two contexts in which such results could directly apply: urn models and opinion dynamics in a random network evolving via preferential attachment.     

Protective effects of Commiphora erythraea resin constituents against cellular oxidative damage

By bioguided fractionation of the hexane extract of Commiphora erythraea resin we isolated four furanosesquiterpenoids that were tested for their protective activity against oxidative stress. Furanodienone and 1,10(15)-furanogermacra-dien-6-ones showed to be potent inhibitors of lipid peroxidation (IC(50) of -0.087 μM), being more active than the methoxylated analogues. Furthermore, using BV2 microglial cells, we found that furanodienone from C. erythraea is able to counteract LPS-induced cell death and decrease LPS-induced NO generation thus protecting microglial cells from LPS-induced cytotoxicity. Finally, docking studies were undertaken to gain insight into the possible binding mode of the isolated compounds at 5-LOX binding site.     

Numerical Investigation of Active Flow Control Around a Generic Truck A-Pillar

Large Eddy Simulations (LES) are conducted to study the actuated flow field around a bluff body. The model is a simplified section of a truck. The aim of the work is to model the separation of the flow acting at the front rounded corners, the so called A-pillars, and to minimize the separation of the flow by means of Zero Net Mass Flux synthetic jets. LES data show the interaction of the flow main structures, the separation mechanism and the effects of the actuation on the flow field. The flow is post processed using modal and frequency decompositions. Relevant results in terms of drag reduction were observed for the actuated flow. The principle flow mechanisms are discussed and an optimal actuation frequency, in terms of induced fluctuations and drag reduction, is identified.