Path to achieving molecular dispersion in a dense reactive mixture

A uniform dispersion of reactants is necessary to achieve a complete reaction involving multicomponents. In this study, we have examined the role of plasticizer in the reaction of two seemingly unlikely reactants: a highly crystalline hexamethylenetetramine (HMTA) and a strongly hydrogen bonded phenol formaldehyde resin. By combining information from NMR, infrared spectroscopy and differential scanning calorimetry, we were able to determine the role of specific intermolecular interactions necessary for the plasticizer to dissolve the highly crystalline HMTA and to plasticize the phenol formaldehyde resin in this crosslinking reaction. The presence of the plasticizer increased the segmental mobility, disrupted the hydrogen bonded matrix, and freed the hydroxyl units, which further increased the solubility of the HMTA. Both the endothermic and exothermic transitions are accounted for in the calorimetric data obtained. For the first time, it is possible to obtain the effective molar ratio of each component needed to complete the crosslinking reaction efficiently. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1519–1526     

Synthesis of Organic-Inorganic Hybrid Particles by Sol-Gel Chemistry

The synthesis of ORganically MOdified SILica (ORMOSIL) particles has been carried out using both the hydrolytic and non-hydrolytic sol-gel routes. The hybrid (nano)composites are organically modified with an alkyl or aryl group covalently bonded to silicon. Hybrids have been synthesised in an aqueous sol-gel process by a modified Stöber route, producing spherical nanoparticles with diameters in the range 50–300 nm. The size of the particles can be controlled by control of certain reaction parameters. Smaller ormosil nanoparticles can be synthesised by a base-catalysed emulsion polymerisation route, by varying the type and concentration of surfactant and precursor feed rate. In this case, particles in the size range 3.5–10 nm can be obtained. Hybrids have been synthesised from hyperbranched polyesters by encapsulation in a silica matrix using the hydrolytic sol-gel route. Optimisation of the reaction conditions allows the hybrids to be produced as isolated sub-micron spherical particles. Ormosil particles have also been synthesised using the non-hydrolytic sol-gel route, which may lead to products of different morphologies because of the different polarity of the reaction medium. Different reaction conditions were studied in order to optimise the size and shape of the particles, including choice of solvent, use of surfactants and addition of polystyrene. Dimethylsulfoxide acts as a novel oxygen donor for the catalyst-free formation of colourless silsesquioxanes.     

Gain depletion due to amplified spontaneous emission in multi-pass laser amplifiers

Calculations of the effects of amplified spontaneous emission (ASE) in laser amplifiers designed to amplify sub-picosecond pulses are presented. A one-dimensional code is used with some simple approximations to account for aspect ratio variation in cases of cylindrical symmetry. Gain depletion due to ASE is compared for various multi-pass geometries. Optimisation for short pulse amplification of a telescopic, beam-expanding, 4-pass amplifier is considered.On leave from Electrotechnical Laboratory, Tsukuba, Ibaraki, Japan     

Effect of hardness and composition gradients on Barkhausen emission in case hardened steel

The effect of gradients in hardness, structure and composition in the surface layers on magnetic Barkhausen noise (MBN) was investigated in two widely used low alloy steels. One material was case hardened by induction hardening. The other was case carburised. Similar hardness profiles were produced by the two treatments. It was found that the variation in structure and hardness through the case in the induction-hardened steel had a minor effect on the MBN profile. In contrast, the inhomogeneity in the case-carburised material showed up clearly. This took the form of a broadened or two-peak MBN profile. When the surface layer containing the case was removed by etching, the broadened profile was replaced by a profile with a single peak. It is concluded that the shape and position of the MBN profile is significantly affected when a gradient in microstructure is induced by a gradient in carbon content. On the other hand, a gradient in microstructure induced by heat treatment with a constant carbon level has much less affect on the MBN profile for the induction-hardened steel.     

Electron energy loss spectroscopy; history and related matters

This paper begins with some historical remarks regarding the author’s early interest in the use of electron energy loss spectroscopy to probe dynamical phenomena on crystal surfaces. We then discuss the physical nature of the interactions responsible for vibrational and spin waves losses, with attention to their role in related phenomena. PACS 61.14.-x; 68.35.Ja; 68.49.Jk; 68.49.Uv     

QCD sum rules: charmonium

The dimensiond=4 gluon condensateφ ₁ is determined from an analysis of charmonium, taking model dependent estimates ofd=6.8 condensates into account. ForS-waves, there is a compatibility region, where both these and model dependent higher state corrections to ground state dominance are small, enablingφ ₁ to be determined from a fit to the data. ForP-waves the estimated higher dimension contributions are large in the region of ground state dominance, and noφ ₁ determination is possible. Theφ ₁ value obtained from the fit to theS-wave ratios is 3 5 times bigger than that obtained by RRY using the plateau method. The methods are compared for the vector current. We show that the higher state correction used by RRY does not fit the data; and that the plateau method is much more sensitive to thed=6.8 condensates than the ratio used here. When reasonable estimates of both these and the higher state corrections are taken into account, there is compatibility between the two methods.     

Characterisation of the photocatalyst Pilkington Activ™: a reference film photocatalyst?

Pilkington Glass Activ™ represents a possible suitable successor to P25 TiO₂, especially as a benchmark photocatalyst film for comparing other photocatalyst or PSH self-cleaning films. Activ™ is a glass product with a clear, colourless, effectively invisible, photocatalytic coating of titania that also exhibits PSH. Although not as active as a film of P25 TiO₂, Activ™ vastly superior mechanical stability, very reproducible activity and widespread commercial availability makes it highly attractive as a reference photocatalytic film. The photocatalytic and photo-induced superhydrophilitic (PSH) properties of Activ™ are studied in some detail and the results reported. Thus, the kinetics of stearic acid destruction (a 10⁴ electron process) are zero order over the stearic acid range 4–129 monolayers and exhibit formal quantum efficiencies (FQE) of 0.7×10⁻⁵ and 10.2×10⁻⁵ molecules per photon when irradiated with light of 365±20 and 254 nm, respectively; the latter appears also to be the quantum yield for Activ™ at 254 nm. The kinetics of stearic acid destruction exhibit Langmuir–Hinshelwood-like saturation type kinetics as a function of oxygen partial pressure, with no destruction occurring in the absence of oxygen and the rate of destruction appearing the same in air and oxygen atmospheres. Further kinetic work revealed a Langmuir adsorption type constant for oxygen of 0.45±0.16 kPa⁻¹ and an activation energy of 19±1 kJ mol⁻¹. A study of the PSH properties of Activ™ reveals a high water contact angle (67°) before ultra-bandgap irradiation reduced to 0° after prolonged irradiation. The kinetics of PSH are similar to those reported by others for sol–gel films using a low level of UV light. The kinetics of contact angle recovery in the dark appear monophasic and different to the biphasic kinetics reported recently by others for sol–gel films [J. Phys. Chem. B 107 (2003) 1028]. Overall, Activ™ appears a very suitable reference material for semiconductor film photocatalysis.     

Approaches to sharing knowledge in group problem structuring

Problem-structuring techniques are an integral aspect of ‘Soft-OR’. SSM, SAST, Strategic Choice, and JOURNEY Making, all depend for their success on a group developing a shared view of a problem through some form of explicit modelling. The negotiated problem structure becomes the basis for problem resolution. Implicit to this process is an assumption that members of the group share and build their knowledge about the problem domain. This paper explores the extent to which this assumption is reasonable. The research is based on detailed records from the use of JOURNEY Making, where it has used special purpose Group Support software to aid the group problem structuring. This software continuously tracks the contributions of each member of the group and thus the extent to which they appear to be ‘connecting’ and augmenting their own knowledge with that of other members of the group. Software records of problem resolution in real organisational settings are used to explore the sharing of knowledge among senior managers. These explorations suggest a typology of knowledge sharing. The implications of this typology for problem structuring and an agenda for future research are considered.     

Interfacial effects on stress distribution in model composites

Raman mechanical spectroscopy was used to examine interfacial effects on the stress distribution in model polydiacetylene fiber/epoxy composites. Epoxy release agents were coated on fiber surfaces to modify the interfacial adhesion properties. The modified fiber surfaces were then characterized by scanning electron microscopy and x-ray photoelectron spectroscopy as well as optical microscopy. No difference in the maximum stress value or stress distribution was observed for the two types of fibers, coated or uncoated, used in composites. This suggests that adhesion properties at the composite interface do not affect tensile stress transfer efficiency nor, therefore, the composite tensile modulus along the fiber axis direction in uniaxial composites. Experimental data were also compared with theoretical calculations assuming perfect bonding between fiber and matrix, and idealized frictional force transfer mechanism at the fiber–matrix interface.