Production of citric acid using immobilized conidia of Aspergillus niger

Conidia of Aspergillus niger were immobilized in calcium alginate gel for the production of citric acid. First, the type of the preactivation medium, together with the preactivation period, was investigated. It was found that A. niger requires a 2-d preactivation period at a 0.05 g/L NH₄NO₃ concentration. Second, preactivated cells were used to determine the effects of nitrogen concentration and the flow rate of oxygen and air on the production of citric acid. Maximum citric acid production was attained with medium containing 0.01 g/L of NH₄NO₃. The rate of citric acid production in the nitrogenous medium was 33% higher when oxygen was used instead of air during the production phase. This corresponds to an increase of 85% when compared to production when neither oxygen nor air was fed into the system. In the nonnitrogenous medium citric acid concentration remained similar regardless of the use of air or oxygen. However, in the nonnitrogenous production medium, citric acid production was not influenced considerably when oxygen was used instead of air. The advantage of using immobilized cells is that production is achieved easily in the continuous system. Therefore, citric acid production was also tested using a packed-bed bioreactor, and an increase in productivity by a factor of 22 was achieved compared to the batch system.     

On the Existence Of Consistent Price Systems

We formulate a sufficient condition for the existence of a consistent price system (CPS), which is weaker than the conditional full support condition (CFS). We use the new condition to show the existence of CPSs for certain processes that fail to have the CFS property. In particular this condition gives sufficient conditions, under which a continuous function of a process with CFS admits a CPS, while the CFS property might be lost.     

Preparation,Characterization and Electromagnetic Shielding Effectiveness of Conductive Polythiophene/Poly(ethylene terephthalate) Composite Fibers

Conductive polythiophene (PTh)/poly(ethylene terephthalate) (PET) composite fibers were prepared by polymerization of thiophene in the presence of PET fibers in acetonitrile medium using FeCl₃. The effects of polymerization conditions such as oxidant/monomer mol ratio and polymerization temperature and time on PTh content and surface electrical resistivity of PTh/PET composite fiber were investigated in detail. It was observed that the usage of preswelled PET fibers in dichloromethane increased the PTh content and decreased surface resistivity of composite fiber. Composite fiber having the highest PTh content (5.7%) and the lowest surface resistivity (80 kΩ) was obtained at 20°C with 1.25 M FeCl₃ and 0.42 M thiophene concentrations. The washing effects of laundering detergent and dry cleaning liquid on surface resistivity of composite fibers were investigated. The electromagnetic shielding effectiveness (EMSE) and relative shielding efficiency by absorption and reflection of composite fibers were measured in the radio and microwave frequency range. The results show that the EMSE values decreased with increasing frequency from radio waves to microwaves with an attenuation of 21 dB to 4 dB.     

Silver nanoparticle containing silk fibroin bionanotextiles

Development of new generation bionanotextiles is an important growing field, and they have found applications as wound dressings, bandages, tissue scaffolds, etc. In this study, silver nanoparticle (AgNP) containing silk-based bionanotextiles were fabricated by electrospinning, and processing parameters were optimized and discussed in detail. AgNPs were in situ synthesized within fibroin nanofibers by UV reduction of silver ions to metallic silver. The influence of post-treatments via methanol treatment and glutaraldehyde (GA) vapor exhibited changes in the secondary structure of silk. Methanol treatment increased the tensile properties of fibers due to supported crystalline silk structure, while GA vapor promoted amorphous secondary structure. AgNP containing silk fibroin bionanotextiles had strong antibacterial activity against gram-positive Staphylococcus aureus and gram-negative Pseudomonas aeruginosa.     

pH Tuning of Water-Soluble Arylazopyrazole Photoswitches

Arylazopyrazoles are an emerging class of photoswitches with redshifted switching wavelength, high photostationary states, long thermal half-lives and facile synthetic access. Understanding pathways for a simple modulation of the thermal half-lives, while keeping other parameters of interest constant, is an important aspect for out-of-equilibrium systems design and applications. Here, it is demonstrated that the thermal half-life of a water-soluble PEG-tethered arylazo-bis(o-methylated)pyrazole (AAP) can be tuned by more than five orders of magnitude using simple pH adjustment, which is beyond the tunability of azobenzenes. The mechanism of thermal relaxation is investigated by thorough spectroscopic analyses and density functional theory (DFT) calculations. Finally, the concepts of a tunable half-life are transferred from the molecular scale to the material scale. Based on the photochromic characteristics of E- and Z-AAP, transient information storage is showcased in form of light-written patterns inside films cast from different pH, which in turn leads to different times of storage. With respect to prospective precisely tunable materials and time-programmed out-of-equilibrium systems, an externally tunable half-life is likely advantageous over changing the entire system by the replacement of the photoswitch.     

Preparation and antimicrobial properties of LL‐37 peptide immobilized lignin/caprolactone polymer film

The use of biopolymers has gained priority in tissue engineering and biotechnology, both as dressing material and for enhancing treatment efficiency. There is a demand for new biopolymers designed with protease inhibitors and antimicrobials. LL‐37 is an important antimicrobial peptide in human skin and exhibits a broad spectrum of antimicrobial activity against bacteria, fungi, and viral pathogens. Using lignin which is an abundant carbohydrate polymer in nature and a polyacrylic acid, we prepared a lignin/caprolactone biodegradable film by plastifying caprolactone and polyacyrlic acid. Lignin/caprolactone biodegradable film was activated with CDI and then immobilized LL‐37 peptide. The structure was elucidated in terms of its functional groups by attenuated total reflectance‐fourier transform infrared spectroscopy (ATR‐FTIR), and the morphology of the lignin/caprolactone biodegradable film was characterized by scanning electron microscopy (SEM) before and after the immobilization process. The amount of LL‐37 immobilized was determined by ELISA method. It was found that 97% of LL‐37 peptide was successfully immobilized onto the lignin/caprolactone biodegradable film. Antimicrobial activity was determined in the lignin/caprolactone biodegradable film samples by quantitative antimicrobial activity method. According to the results, LL‐37 immobilized lignin/caprolactone biodegradable film samples were effective on test organisms; Gram‐positive Staphylococcus aureus and Gram‐negative Escherichia coli. In bio‐compatibility assays, the ability to support tissue cell integration was detected by using 3 T3 mouse fibroblasts. Samples were examined under transverse microscope, non‐immobilized sample showed a huge cellular death, whereas LL‐37 immobilized lignin/caprolactone biodegradable film had identical cellular growth with the control group. This dual functional lignin/caprolactone biodegradable film with enhanced antibacterial properties and increased tissue cell compatibility may be used to design new materials for various types of biological applications.     

A stochastic approximation for fully nonlinear free boundary parabolic problems

We present a stochastic numerical method for solving fully nonlinear free boundary problems of parabolic type and provide a rate of convergence under reasonable conditions on the nonlinearity. © 2013 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 30: 902–929, 2014     

Turkish Preservice Primary School Teachers' Science Teaching Efficacy Beliefs and Attitudes Toward Science: The Effect of a Primary Teacher Education Program

The main purpose of this study was to investigate the effectiveness of a primary teacher education program in improving science teaching efficacy beliefs (personal science teaching efficacy beliefs and outcome expectancy beliefs) of preservice primary school teachers. The study also investigated whether the program has an effect on student teachers' attitudes toward science. Data were collected by administering the “Science Teaching Efficacy Beliefs Instrument” and “Attitudes toward Science Scale” to 282 preservice primary teachers (147 freshmen, 135 seniors). Statistical techniques such as means and t‐test were used to analyze the data. Results of the study showed that the primary teacher education program has a medium positive effect on science teaching efficacy beliefs of the primary preservice teachers (t = 4.791, p = .000) and that there were no gender differences in terms of efficacy beliefs. Results also indicated that preservice primary teachers' attitudes toward science were moderately positive and differ by class level. Fourth‐year preservice teachers' attitudes toward science were found to be significantly more positive than the first years (t = 5.494, p = .000). There were no gender differences in attitudes toward science.     

Expected Number of Real Roots for Random Linear Combinations of Orthogonal Polynomials Associated with Radial Weights

In this note, we obtain asymptotic expected number of real zeros for random polynomials of the form

$$f_{n}(z)=\sum\limits_{j=0}^{n}{a^{n}_{j}}{c^{n}_{j}}z^{j}$$

where \({a^{n}_{j}}\) are independent and identically distributed real random variables with bounded (2 + δ)th absolute moment and the deterministic numbers \({c^{n}_{j}}\) are normalizing constants for the monomials z ^j within a weighted L ²-space induced by a radial weight function satisfying suitable smoothness and growth conditions.