结构动力优化设计述评与展望

结构动力优化设计是当前工程结构设计研究领域中的前沿性课题。文中着重从结构动力特性优化、结构动力响应设计、结构动力灵敏度分析和基于可靠性的结构动力优化设计等四个专题方面对结构动力优化设计研究的发展与现状进行了述评,并粗略地展望了结构动力优化研究未来的发展趋势。      

镍钛记忆合金自补偿磨粒磨损性能研究

研究了高临界温度镍钛记忆合金一维自补偿磨粒磨损特性.结果表明,在一定温度下,镍钛记忆合金在摩擦过程中具有形状恢复能力,从而产生一维磨损自补偿作用.超弹状态镍钛记忆合金具有热弹性马氏体相变、高阻尼、应力感生马氏体、超弹性、高应变硬化指数和时效弥散析出强化等特性,这使得硬度较低的镍钛合金的耐磨性能远优于硬度较高的淬火45#钢.利用超弹状态镍钛记忆合金的磨损自补偿作用可望开发出新型抗磨形状记忆合金产品.     

Novel correction method for X-ray beam energy fluctuation of high energy DR system with a linear detector

A high energy digital radiography (DR) testing system has generated diverse scientific and technological interest in the field of industrial non-destructive testing. However, due to the limitations of manufacturing technology for accelerators, an energy fluctuation of the X-ray beam exists and leads to bright and dark streak artifacts in the DR image. Here we report the utilization of a new software-based method to correct the fluctuation artifacts. The correction method is performed using a high pass filtering operation to extract the high frequency information that reflects the X-ray beam energy fluctuation, and then subtracting it from the original image. Our experimental results show that this method is able to rule out the artifacts effectively and is readily implemented on a practical scanning system.     

Synthesis of SnO_2 nanorods from aqueous solution:The effect of preparation conditions on the formed patterns

<正>SnO_2 nanorods were deposited on the Si substrates in an aqueous solution containing both SnCl_4 and CO(NH_2)_2.It is found that different self-assembled patterns of SnO_2 nanorods can be obtained by changing the deposition conditions such as the molar ratio of CO(NH_2)_2 to SnCl_4 and the pretreatment of the substrate.Scattered SnO_2 nanorods,for example,can be changed into flower-like patterns when the molar ratio of CO(NH_2)_2 to SnCl_4 is raised,and well-aligned nanorod arrays can be formed when the pretreatment of the substrate is changed.In addition,some interesting patterns,e.g.tree-like patterns,can also be observed.     

A three-step system calibration procedure with error compensation for 3D shape measurement

System calibration, which usually involves complicated and time-consuming procedures, is crucial for any three-dimensional （3D） shape measurement system based on vision. A novel improved method is proposed for accurate calibration of such a measurement system. The system accuracy is improved with considering the nonlinear measurement error created by the difference between the system model and real measurement environment. We use Levenberg-Marquardt optimization algorithm to compensate the error and get a good result. The improved method has a 50% improvement of re-projection accuracy compared with our previous method. The measurement accuracy is maintained well within 1.5% of the overall measurement depth range.     

Electronic Properties of Passive Films Formed on G3 and G30 Nickel-based Alloys in Bicarbonate/Carbonate Buffer Solution

The electronic properties of passive films formed on G3 and G30 alloys in bicarbonate/carbonate buffer solution were comparatively studied by electrochemical impedance spectra(EIS) and Mott-Schottky analysis, the chemical composition of the passive film formed on G3 alloy was detected by X-ray photoelectron spectroscopy (XPS). The results show that passive film on G3 alloy had better protection than that on G30 alloy. The transfer resistance, film resistance and diffusion resistance of the passive films on ...     

Pr0．45（Ca1-xSrx）0．55MnO3体系调带宽引起的磁相变及电输运性质转变

采用固相法制备了Pr0．45（Ca1-xSrx）0．55MnO3（x=0．0,0．2,0．4,0．6,0．8,1．0）多晶样品．通过测量样品的X射线衍射（XRD）谱、磁化强度-温度（M～T）曲线、电阻率-温度（ρ～T）曲线,研究了Sr^2＋替代Ca^2＋对Pr0．45Ca0．55MnO3体系磁性和电性的影响．实验发现：...     

强反射复杂表面随机缺陷检测照明系统分析

分析了采用CCD光电检测法对强反射复杂表面随机缺陷进行检测时的光学照明问题。给出了缺陷显现力的具体定义。对比了平行光和均匀散射光对消除强反射光的不同作用及对不同表面缺陷的显现力。分析了使用均匀散射光作为光源时，工件表面照度对成像质量的影响。给出了在上述条件下光照系统设计的基本原则。     

SrRuO3样品的制备及性能研究

利用化学共沉淀法制备了SrRuO3样品.X射线衍射确定样品为单相正交畸变钙钛矿结构.扫描电子显微镜观察了颗粒形貌基本成球形,颗粒尺寸分布在150~300 nm范围之间,SrRuO3样品在161 K温度以下具有铁磁性,SrRuO3样品没有表现出金属导电性.     

四端光纤补偿网络的理论分析

强度干扰是阻碍强度调制光纤传感器发展及应用的关键问题.研究表明,光纤网络补偿方法对抑制强度干扰是一种行之有效的方法.作者经过深入的研究,提出了一种先进的四端光纤补偿网络结构.本文对四端光纤补偿网络进行了全面、系统的分析,揭示了网络的特性.这对于强度调制光纤传感器的发展及应用具有重要的意义.同时,对于强度调制光学测量系统也具有一定的意义.