Photolithographic Patterning and Doping of Silica Xerogel Films

This study shows that conventional photolithography can be applied for patterning native or organic dye-doped silica films (0.5 m thick) obtained via a base-catalyzed sol-gel process. Photoresist was spin-coated onto high optical quality xerogel films, soft-baked, exposed to UV irradiation through a photomask, and developed with a commercial photoresist developing solution. Etching away of the photoresist-unprotected areas of the silica films was carried out with a dilute HF solution, while the remaining unexposed photoresist was removed with acetone. Interdigitated array patterns with features as small as 0.5 mm show a smooth surface and extremely sharp interfaces. Densification of the films at 550°C for 2 h decreases the film thickness by 11%, increases the refractive index from 1.420 to 1.456, and allows for well-defined patterning down to length scales of 10 m. Since the densification conditions are incompatible with organic dopants, it is demonstrated that sol-gel films can be doped after pattering (post-doping) by adsorption of cationic dyes from solution. Scanning electron microscopy reveals that the microstructure of patterned sol-gel films is similar to that of bulk monoliths, indicating that the photolithographic procedure is not harmful to the film quality. All patterned films demonstrate highly regular light diffraction patterns.     

Patterning porous matrices and planar substrates with quantum dots

Silica hydrogels and planar substrates were patterned with CdS nanoparticles using a photolithographic method based on the photo dissociation of thiols and cadmium-thiolate complexes. Silica hydrogels were prepared via a standard base-catalyzed route. The solvent was exchanged with an aqueous solution of CdSO₄ and 2-mercaptoethanol, and the samples were then exposed to a focused ultraviolet beam. Planar substrates were patterned by illuminating a precursor solution spin coated on the substrates. CdS nanoparticles formed in the illuminated spots, and had a diameter below about 2 nm. The diameter of the spots illuminated by the UV beam could be varied from a few hundred to a few μm, on both hydrogels and planar substrates. Samples were characterized with transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, and optical absorption, photoluminescence and Raman spectroscopies. All these techniques confirmed the chemical identity of the CdS nanoparticles. To investigate the mechanism of nanoparticle formation, we took absorption spectra of the precursor solution as a function of irradiation time. In unirradiated solutions, we noticed a maximum at 250 nm, characteristic of Cd-thiolate complexes. The absorption at 250 nm decreased with increasing irradiation time. A new band appeared at 265 nm for exposures around 5 min, and that band shifted to 290 nm in samples exposed for 10 min. A yellow precipitate formed after about 30 min. XRD showed that the precipitate was cubic CdS, with a mean particle size of 1.4 nm. We attribute formation of CdS to the photodissociation of the thiols and of the Cd-thiolates. UV irradiation of these precursors yields a series of species that can react with Cd²⁺, such as RS^·, S²⁻ and H₂S. Small CdS nanoparticles form in the initial stages of illumination, and present absorption bands in the 265–290 nm region. These CdS aggregates grow, coalesce and precipitate for longer irradiation times.     

Immobilization of Pd Catalysts on Mesoporous Silica for Amine- and Copper-Free Sonogashira Coupling Reactions

Immobilization of catalysts on solid supports is a promising approach to combine the advantages of heterogeneous and homogeneous catalysts. Pd(PPh₃)₂Cl₂, known as an extremely active homogeneous catalyst for the Sonogashira coupling reaction, has been immobilized on high-surface-area MCF (mesocellular foams)–type mesoporous silica powder modified with 3-aminopropyltriethoxysilane and subsequently with diphenylphosphine. The functionalized MCF-type silica and supported catalysts have been characterized by x-ray photoelectron spectroscopy (XPS), fourier transform infrared spectroscopy (FTIR), elemental analysis, nitrogen sorption porosimetry, and scanning electron microscopy (SEM). Such supported Pd catalysts have proven to be useful recyclable reagents for copper- and amine-free Sonogashira coupling reactions of haloaromatic compounds with terminal alkynes.     

One-step synthesis and redox properties of dodecahydro-3a,9a-diazaperylene--the most easily oxidized p-phenylenediamine

Dodecahydro-3a,9a-diazaperylene (DHDAP) was prepared in one step from p-phenylenediamine and 1-bromo-3-chloropropane, and its first redox potential is 292 mV more negative than the first redox potential of N,N,N',N'-tetramethyl-p-phenylenediamine (TMPD), thus becoming the most easily oxidized p-phenylenediamine homologue.     

Capillary Imbibition and Pore Characterisation in Cement Pastes

The kinetics of capillary imbibition in ordinary Portland cement pastes has been studied experimentally and theoretically. Nuclear magnetic resonance stray field imaging (STRAFI) has been used to record water concentration profiles for various ingress times. The profiles follow a t law and thus a master curve can be formed using the Boltzmann transformation. The distribution of pore sizes within the sample as measured by NMR cryoporometry shows a prominent peak at 100Å. A computer model of the pore structure was developed consisting of a lattice of interconnecting pores with a size distribution consistent with the cryoporometry results. The Hagen–Poiseuille law was used to describe the kinetics of the water in this pore structure. The best agreement between the computer simulations and the experimental master curve was obtained by using a narrower range of pore sizes than indicated by the cryoporometry results.     

4-Nitrobenzylamine partially intercalated into graphite powder and multiwalled carbon nanotubes: characterization using X-ray photoelectron spectroscopy and in situ atomic force microscopy

We report the characterization of partial intercalation of 4-nitrobenzylamine (4-NBA) into edge-plane or edge-plane-like defect sites on the surface of both graphite powder and "bamboo-like" multiwalled carbon nanotubes (MWCNTs) using X-ray photoelectron spectroscopy (XPS). By comparing the XPS spectra of 4-NBA derivatized graphite powder and MWCNTs with that of graphite powder treated with benzylamine in a similar fashion, we conclude that benzylamine itself does not undergo partial intercalation. Using in situ atomic force microscopy, we are able to observe the partial intercalation of 4-NBA into an edge-plane-like "step" defect on the surface of a highly ordered pyrolytic graphite crystal in real time. Together these observations provide further evidence for the partial intercalation of 4-NBA and lead us to propose a new hypothesis to explain this phenomenon.     

Demonstration of the elusive concentration-gradient paramagnetic force

Using classical electrochemistry, it is demonstrated that the concentration-gradient paramagnetic force, FnablaC, is a body force proportional to |B|2 acting parallel to the concentration gradient of electrogenerated radicals. FnablaC can balance gravity, holding volumes of solution wherein mass transfer continues to take place by diffusion. In contrast to usual levitation forces, FnablaC does not depend on field gradients and may be present even in homogeneous magnetic fields. Understanding the properties of FnablaC is relevant to magnetic confinement and levitation and is speculated even to propulsion with objects having permanent susceptibility gradients.     

Cysteine methyl ester modified glassy carbon spheres for removal of toxic heavy metals from aqueous media

Glassy carbon spherical powder (10-20 microm diameter) modified with cysteine methyl ester is found to be an inexpensive, novel material for the rapid removal of large quantities of toxic heavy metal ions such as Cd(II), Cu(II) and As(III) from aqueous media, with wide ranging potential applications such as third world drinking water filtration or environmental cleanup.     

High resolution patterning of silica aerogels

Three-dimensional metallic structures are fabricated with high spatial resolution in silica aerogels. In our method, silica hydrogels are prepared with a standard base-catalyzed route, and exchanged with an aqueous solution typically containing Ag⁺ ions (1 M) and 2-propanol (0.2 M). The metal ions are reduced photolytically with a table-top ultraviolet lamp, or radiolytically, with a focused X-ray beam. We fabricated dots and lines as small as 30 × 70 μm, protruding for several mm into the bulk of the materials. The hydrogels are eventually supercritically dried to yield aerogels, without any measurable change in the shape and spatial resolution of the lithographed structures. Transmission electron microscopy shows that illuminated regions are composed by Ag clusters with a size of several μm, separated by thin layers of silica.