Hydromagnetic instability of streaming fluids in porous medium

The instability of the plane interface between two uniform, superposed, electrically conducting and counter-streaming fluids through a porous medium is considered in the presence of a horizontal magnetic field. In the absence of surface tension, perturbations transverse to the direction of streaming are found to be unaffected by the presence of streaming if perturbations in the direction of streaming are ignored. For perturbations in all other directions there exists instability for a certain wavenumber range. The instability of this system is postponed by the presence of magnetic field. The magnetic field and surface tension are able to suppress this Kelvin-Helmholtz instability for small wavelength perturbations and the medium porosity reduces the stability range given in terms of a difference between the streaming velocities and the Alfvén velocity.This research forms a part of the research project awarded to the first author (R.C.S.) by the University Grants Commission.     

Sorption and concentration of51Cr(VI) traces on TiO2 and ZrO2 by radioindicator study

The carrier technique has been used to concentrate Cr(VI) radiometrically by studying the carrying efficiency as a function of pH of aqueous medium, added ions, carrying capacity, amount of carrier and subsequent desorption of the activity adsorbed under optimum experimental conditions. The study shows that under optimum experimental conditions, 0.15 g of ZrO₂ and 0.25 g of TiO₂ carry 0.01 mg and 0.001 mg of chromium respectively. Further, the activity carried under the specified conditions can be recovered more or less quantitatively by leaching the carrier.     

Antimicorbial effects of newly synthesized organotin(IV) and organolead(IV) derivatives

Triorganotin(IV) and triorganolead(IV) derivatives of the types Me₃Sn(SCZ) and Ph₃Pb(SCZ) (where SCZ^? is the anion of a semicarbanzone ligand) have been synthesized by substitution reactions of trimethyltin chloride and triphenyl-lead chloride with semicarbazones derived from heterocyclic ketones. The resulting complexes have been characterized by elemental analyses, molecualr weight determinations and conductivity measurements. The mode of bonding has been established on the basis of infrared and ¹H, ¹³C and ¹¹⁹Sn NMR spectroscopic studies. Some respresentative complexes have also been evaluated for their antimicrobial effects on different species of pathogenic fungi and bacteria; the results of these investigations have been reported in the present paper.     

Spin density distributions in some fluorinated radical cations

A theoretical study of π-electron spin density distributions has been made for a series of fluoro-substituted hydrocarbon radical cations using unrestricted Hartree-Fock theory. Although some of the predicted proton splittings are not in very good agreement with experiment, the overall agreement with experiment can be passed as fairly satisfactory considering the approximate nature of the theory used. The experimental fluorine splittings can be well predicted by using a one-parameter relationship between the isotropic fluorine splitting (a_F) and the π-electron spin density (ρ_CC) on the attached carbon. It has been further shown that both ρ_CC and the proportionality constant (Q_eff) in the linear relation, are fairly insensitive to the parameter choice.     

Soot deep oxidation catalyzed by molybdena and molybdates: a thermogravimetric investigation

Molybdena (MoO₃) and molybdates of bismuth (Bi₂Mo₃O₁₂), chromium (Cr₂Mo₃O₁₂), barium (BaMoO₄), manganese (MnMoO₄) and copper (Cu₃Mo₂O₉) were synthesized and characterized by X-ray powder diffractometry and infrared spectroscopy. They were then assessed as ‘loose contact' catalysts for soot deep oxidation (combustion) in air by thermogravimetry. A similar assessment was carried out on commercial chromia (Cr₂O₃) and tungsta (WO₃). Observed high oxidation activity of MoO₃, as compared to both Cr₂O₃ and WO₃, is attributed to the higher volatility (mobility) of MoO_x species. On similar grounds, observed high activity of MoO₃ and Cu₃Mo₂O₉, as compared to the other test molybdates, is explained. Relatively speaking, however, a higher activity was observed for Cu₃Mo₂O₉ than MoO₃, whereby soot ignition temperature decreased from 571°C (uncatalyzed oxidation) to 430°C, to occur within the temperature range of diesel exhaust (200–450°C). This observation is ascribed to copper-promoted redox conduct of Mo(VI) in the oxidation reaction of soot. Kinetics of the reaction was studied non-isothermally, and the kinetic parameters (A, k, ΔE and the reaction order) were calculated.     

Generic fast gradient liquid chromatography/tandem mass spectrometry techniques for the assessment of the in vitro permeability across the blood-brain barrier in drug discovery

Rapid, generic gradient liquid chromatography/tandem mass spectrometry (LC/MS/MS) assays, designed to accelerate sample analyses, have been developed to keep pace with the productivity of advanced synthetic procedures. In this study, LC/MS/MS was combined with an in vitro, cell-based, blood-brain barrier (BBB) model to evaluate the potential of new chemical entities (NCEs) to cross the BBB. This in vitro assay provides the permeability of discovery compounds across a monolayer of a primary culture of bovine brain microvessel endothelial cells in a fraction of the time that is required for in vivo studies (brain/plasma concentrations), using only 2 mg of the compound. The results are consistent with in vivo brain/plasma concentration ratio data.     

Effect of Fe addition on the crystallization behaviour and Curie temperature of CoCrSiB-based amorphous alloys

The crystallization behaviour and Curie temperature of melt-spun Co_{71? x} Fe _x Cr₇Si₈B₁₄ (x?=?0, 2, 3.2, 4, 6, 8 and 12?at.%) amorphous alloys have been studied. Differential scanning calorimetry (DSC) showed two stages of crystallization. The first stage of crystallization (T _X1) in the alloy with 6?at.%?Fe was the highest and it had the highest activation energy. X-ray diffraction studies revealed that the primary crystalline phase is hcp-(CoCr)₂Si for Fe-free alloy, whereas (CoFeCr)₂Si and (CoFeCr)₃Si phases were formed with the addition of Fe. hcp-Co was also formed along with these phases. The secondary crystalline phases were fcc-Co and various boron-rich phases. The Curie temperature of the alloys also changed with the addition of Fe to the system. Like the primary crystallization temperature, the Curie temperature of the alloys did not vary systematically with the Fe content. The addition of Fe to the Co-based system changes the nearest-neighbour interaction. This changes the exchange interaction between the transition metal elements. Due to the asymmetry in the Bethe–Slater curve, a systematic variation with Fe addition was not observed in the Curie temperature measurement.     

Fabrication and characterization of electrochemical double layer capacitors using ionic liquid-based gel polymer electrolyte with chemically treated activated charcoal electrodes

The present investigation deals with electrochemical double layer capacitors (EDLCs) made up of ionic liquid (IL)-based gel polymer electrolytes with chemically treated activated charcoal electrodes. The gel polymer electrolyte comprising of poly(vinylidine fluoride-co-hexafluropropylene) (PVdF-HFP)–1-ethyl-2,3-dimethyl-imidazolium-tetrafluroborate [EDiMIM][BF₄]–propylene carbonate (PC)–magnesium perchlorate (Mg(ClO₄)₂) exhibits the highest ionic conductivity of ~8.4?×?10^?3?S?cm^?1 at room temperature (~20 °C), showing good mechanical and dimensional stability, suitable for their application in EDLCs. Activation of charcoal was done by impregnation method using potassium hydroxide (KOH) as activating agent. Brunauer–Emmett–Teller (BET) studies reveal that the effective surface area of treated activated charcoal powder (1,515 m²?g^?1) increases by more than double-fold compared to the untreated one (721 m²?g^?1). Performance of EDLCs has been tested using cyclic voltammetry, impedance spectroscopy, and charge–discharge techniques. Analysis shows that chemically treated activated charcoal electrodes have almost triple times more capacitance values as compared to the untreated one.     

Synthesis of Metal‐Free Phthalocyanines in Functionalized Ammonium Ionic Liquids

A convenient, fast, efficient, and ecofriendly synthesis of metal‐free phthalocyanines from various substituted phthalonitriles in different hydroxyalkylammonium ionic liquids in the presence of 1,8‐diazabicyclo‐[5,4,0]‐undec‐7‐ene (DBU) is reported in moderate yields. The effect of concentration of DBU and temperature on the synthesis of phthalocyanine in N‐(2‐hydroxyethyl)‐N,N‐dimethylbutylammonium bromide ionic liquid has been examined, and the ionic liquid has been recovered and reused conveniently.