Estimation of growth rate in unidirectionally solidified multicrystalline silicon by the growth-induced striation method

Multicrystalline silicon was grown by unidirectional solidification method using the accelerated crucible rotation technique. The application of the accelerated crucible rotation technique in unidirectional solidification method induced growth striations across the axial direction of the grown crystal. This striation pattern was observed from carbon concentration distribution, obtained by using Fourier transform infrared spectroscopy. The generated striation pattern was found to be weak and discontinuous. Some striations were absent, probably due to back melting, caused during each crucible rotation. From the growth striations and applied time period in crucible rotation, the growth rate was estimated by using Fourier transformation analysis.     

Phase rotation scheme of laser-produced ions for reduction of the energy spread

In order to widely spread out particle beams utilized in cancer therapy, laser-produced ions are developed as the injection beam for an ion synchrotron dedicated for cancer therapy. Such a laser ion source is expected to contribute largely to the realization of compactness of the size and low cost of the cancer therapy accelerator. The energy spectrum of the laser-produced ions, however, has no peak, but their intensities decrease exponentially according to the increase of the energy. For the purpose of modifying such a situation, we have proposed a scheme to rotate the beam in the longitudinal phase space with the use of the RF electric field, which is phase-adjusted with the pulse laser. We aim for a reduction of the energy spread of ± 5% selected by an energy analyzer and slits to ±1% by such phase rotation. For this purpose, a quarter wavelength resonator with two gaps with the same resonant frequency as the source laser has already been fabricated, together with its RF power source. The above phase rotation system and its recent experimental realization are presented.     

双奇核188Au的准粒子带结构研究

利用在束γ谱学实验技术, 通过¹⁷³Yb(¹⁹F,4nγ)反应 布居了¹⁸⁸Au的高自旋态, 并对其准粒子带结构进行了研究. 基于实验测量结果, 对原有的双奇核¹⁸⁸Au能级纲图做了较大的修改. 通过系统性比较, 对15⁺以上的能级结构进行了讨论.     

Measuring Light Field of Light Source with High Directional Resolution Using Mirrored Ball and Pinhole Camera

This paper presents a method of measuring a light field of a light source with high directional resolution using a mirrored ball and a pinhole camera. The light field describes a spatial and directional distribution of radiances from the light source. The directional distribution is expanded by a reflection on the mirrored ball, and the radiances are measured by a charge-coupled device (CCD) camera with a pinhole lens. The light source is laterally moved by a robot arm to measure the directionally expanded light field, and each pixel on a CCD can obtain the radiances from the light source through the pinhole lens with high directional resolution. The light field is estimated from the pixel value and the position of each pixel using a ray tracing technique. The light field of a krypton lamp was experimentally measured by the proposed method, and the accuracy of the measurement was evaluated against the irradiances measured by a spectro-radiometer at sample points.     

Generalized Airy Functions and the Cohomological Intersection Numbers

We compute explicitly the cohomological intersection numbers for the basis and extend the result of Iwasaki and Matsumoto. To this end, we establish the exterior power structure for the polynomial twisted de Rham cohomology group associated with the generalized Airy functions at a point of extended Veronese variety. Using this structure, we introduce a natural basis of the twisted de Rham cohomology group coming from that of the one-dimensional case, which is considered as an analogue of a flat basis of the Jacobi ring of A-type simple singularity.     

Temperature and velocity measurement of a 3-D thermal flow field using thermo-sensitive liquid crystals

It is an important challenge to analyze a three-dimensional thermal flow field in engineering, science, and agriculture. For such an analysis, it is essential to measure physical quantities such as temperature and velocity over the entire thermal flow field. This paper presents a measurement system based on color image processing for temperature and velocity vector distributions in a three-dimensional thermal flow field. Flow visualization is accomplished by the use of thermo-sensitive liquid crystal tracers. An algorithm for the color-to-temperature transformation using a multi-layer feed-forward neural network is applied to three-dimensional natural convection in a rotating cylindrical cell. Two-dimensional temperature distributions in a slit plane are obtained by using the algorithm. A three-dimensional temperature distribution is consequently constructed by interpolating the two-dimensional distributions using the B-spline function. In addition, the Spatio-Temporal correlation method is applied to the natural convection to obtain a three-dimensional velocity vector distribution.     

Zero-cycles on self-product of modular curves

We use the elements in K-cohomology groups which are constructed by Flach and Mildenhall to obtain a finiteness result for the torsion part of the Chow group of a self-product of a modular curve.