Renewable-surface sol-gel derived carbon ceramic electrode fabricated by [Ru(bpy)(tpy)Cl]PF6 and its application as an amperometric sensor for sulfide and sulfur oxoanions

A highly sensitive and fast responding sensor for the determination of thiosulfate, sulfite, sulfide and dithionite is described. It consists of a chemically modified carbon ceramic composite electrode (CCE) containing [Ru(bpy)(tpy)Cl]PF6 complex that was constructed by the sol-gel technique. A reversible redox couple of Ru(II)/Ru(III) was observed as a solute in acetonitrile solution and as a component of carbon based conducting composite electrode. Electrochemical behavior and stability of modified CCE were investigated by cyclic voltametry, the apparent electron transfer rate constant (kappa(S)) and transfer coefficient (a) were determined by cyclic voltametry which were about 28 s(-1) and 0.43 respectively. Electrocatalytic oxidation of S(2-), SO3(2-), S2O4(2-) and S2O3(2-) were effective at the modified electrode at significantly reduced overpotentials and in the pH range 1-11. Optimum pH values for amperometric detection of thiosulfate, dithionite, sulfide and sulfite are 7, 9, 2 and 2. Under the optimized conditions the calibration curves are linear in the concentration ranges 1-500, 3-80, 2-90 and 1-100 microM for S2O3(2-), SO3(2-), S2- and S2O4(2-) determination. The detection limit (signal to noise is 3) and sensitivity are 0.5 and 12, 2.8 and 6, 1.6 and 8, and 0.65 microM and 80 nA microM(-1) for thiosulfate, sulfite, sulfide and dithionite detection. The modified carbon ceramic electrode doped with Ru-complex shows good reproducibility, a short response time (t < 2 s), remarkable long term stability (> 6 month) and especially good surface renewability by simple mechanical polishing (RSD for eight successive polishing is 2%). The advantages of this sulfur compound amperometric detector based on ruthenium doped CCE are high sensitivity, inherent stability at a broader pH range, excellent catalytic activity, less expense and simplicity of preparation in comparison with recently published papers. This sensor can be used as a chromatographic detector for analysis of sulfur derivatives.     

Reaction of tris(trimethylsilyl)methylsilicon halides with methanolic sodium methoxide. Probability of sila-olefin intermediates

The compounds TsiSiR₂X [Tsi = Me₃Si)₃C; R = Me, X = Cl, Br, I, or R = Ph, X = F, Cl, Br, I)] react with boiling 2 M MeONa-MeOH to give products of the type (Me₃Si)₂CHSiR₂OMe. It is suggested that the reaction proceeds through an elimination, analogous to E2 eliminations of alkyl halides, involving synchronous attack of MeO^? at an Me₃Si group, liberation of X^?, and formation of (Me₃Si)₂CSiR₂. The compounds TsiSiPhMeF TsiSiPhCl₂ react analogously to give (Me₃Si)₂CHSiPhMe(OMe) and (Me₃Si)₂CHSiPh(OMe)₂ [tha latter presumably by solvolysis of the initially-formed (Me₃Si)₂CHSiPhCl(OMe)]. The compounds TsiSiMe₂OMe and TsiSiMe₃ do not react, while TsiSiMe₂H gives TsiH. The compound TsiSiCl₃ reacts with 0.1 M MeONa-MeOH to give the substitution and elmination products TsiSiCl₂(OMe) and (Me₃Si)₂CHSi(OMe)₃ in ca. $\text{1}\text{2}$ ratio.     

Synthesis of 1-oxa-2-silacyclopentane derivatives via intramolecular nucleophilic attack at silicon

Metalation of (HSiMe₂)₃CH with lithium diisopropylamide (LDA) in THF gives (HSiMe₂)₃CLi, which reacts with ethylene oxide, propylene oxide, 1,2-epoxy butane, 1,2-epoxy pentane, 1,2-epoxy hexane, and epichlorohydrin to give the corresponding 1-oxa-2-silacyclopentane derivatives. Then, glycidylmethacrylate (GM) random copolymers with styrene (St) (in a 1:1 and 1:3 mol ratio) were synthesized by solution free radical polymerization at 70(±1) °C using α,α′-azobis(isobutyronitrile) (AIBN) as an initiator. Both types of copolymers were treated with (HSiMe₂)₃CLi to give new modified copolymers. The reaction of (HSiMe₂)₃CLi with epoxides on the side chains of the copolymers does not lead to intramolecular nucleophilic attack contrary to simple epoxides. All the products have been characterized by spectroscopic techniques.     

Cobalt(II)-selective membrane electrode based on N,N′-di(thiazol-2-yl)formimidamide

A new PVC-membrane electrode for Co²⁺ ions based on N,N′-di(thiazol-2-yl)formimidamide (TF) as membrane carrier has been developed. The electrode resulted in Nernstian response (29.5?±?0.4?mV decade^?1) for Co²⁺ ion over a wide concentration range (2.5?×?10^?7 ?1.0?×?10^?1?M) with a detection limit of 6.1?×?10^?8?M. The sensor has a response time of about 10?s, and can be used for at least 2 months without observing any deviation from the Nernstain response. The electrode revealed good selectivity towards cobalt(II) ion over a wide variety of alkali, alkaline earth, transition, and heavy metal ions and could be used in the pH range 2.0–7.0. The electrode was used for determination of Co²⁺ in real samples.     

1,3-Migration of Trimethylsilyl Group from Carbon to Oxygen in Highly Sterically Hindered Silanol of the Type (Me 3 Si) 3 CSi(C 6 H 4 Me- p )MeOH and Reaction of the Related Iodide with Iodine Monochloride and Iodine Monobromide

The silanol (Me 3 Si) 3 CSi(C 6 H 4 Me- p )MeOH has been shown to isomerize to (Me 3 Si) 2 CHSi(C 6 H 4 Me- p )(Me)(OSiMe 3 ) when it was kept at room temperature for 10 h in 0.2 M NaOMe/MeOH. Corresponding isomerizations of the above silanol (to give (Me 3 Si) 2 CHSi(C 6 H 4 Me- p ) (Me)(OSiMe 3 )) are complete after 26 h under reflux in pyridine. The reaction involve 1,3-migration from carbon to oxygen within a silanolate ion to give a carbanion, which rapidly acquires a proton from the solvent. Treatment of (Me 3 Si) 3 CSi(C 6 H 4 Me- p )MeOH with MeLi in Et 2 O/THF give, by the same rearrangement, the organolithium reagent (Me 3 Si) 2 CLiSi(C 6 H 4 Me- p )(Me)(OSiMe 3 ) which on treatment with Me 2 SiHCl gives (Me 3 Si) 2 C(SiMe 2 H)Si(C 6 H 4 Me- p )(Me)(OSiMe 3 ) and (Me 3 Si) 2 CHSi(C 6 H 4 Me- p )(Me)(OSiMe 3 ). When the experiment was repeated, but with Me 3 SiCl in place of Me 2 SiHCl, it gives exclusively (Me 3 Si) 2 CHSi(C 6 H 4 Me- p )(Me)(OSiMe 3 ). Treatment of the organolithium reagent (Me 3 Si) 2 CLiSi(C 6 H 4 Me- p )(Me)(OSiMe 3 ) with Mel gives exclusively (Me 3 Si) 2 CMeSi(C 6 H 4 Me- p )(Me)(OSiMe 3 ). The related iodide (Me 3 Si) 3 CSi(C 6 H 4 Me- p )Mel reacts with ICI and IBr to give rearranged (Me 3 Si) 2 C(SiMe 2 X)Si(C 6 H 4 Me- p )Me 2 and unrearranged products (Me 3 Si) 3 CSi(C 6 H 4 Me- p )MeX, (X = Cl, Br) respectively. The rearranged bromide (Me 3 Si) 2 C(SiMe 2 Br)Si(C 6 H 4 Me- p )Me 2 reacts with a range of silver [I] salts AgY (Y = OOCCH 3 , SO 4 2 m ) and Mercury [II] salt HgY 2 (Y = OOCCH 3 , SO 4 2 m ) in glacial CH 3 COOH to give the corresponding species (Me 3 Si) 2 C(SiMe 2 OOCCH 3 )Si(C 6 H 4 Me- p )Me 2 . The reaction of the bromide with AgBF 4 in MeOH or i -PrOH give the corresponding rearranged products (Me 3 Si) 2 C(SiMe 2 Y)Si(C 6 H 4 Me- p )Me 2 (Y = --OMe, --OPr i ).     

Synthesis of Novel Organosilicon Compounds Possessing Fully Substituted Imidazole Nucleus Sonocatalyzed by Fe-Cu/ZSM-5 Bimetallic Oxides

An efficient four-component synthesis of 1,2,4,5-tetrasubstituted imidazoles is described by one-step condensation of an aldehyde, benzil, ammonium acetate, and primary aromatic amine with nanostructure Fe-Cu/ZSM-5 bimetallic oxides in water under ultrasonic irradiation. The short reaction time, good yields, environmental friendly procedure, mild reaction conditions, and convenient operation are important advantage of this protocol. The products generated during the study have been utilized as substrates for synthesis of organosilicon-containing imidazoles. Synthesis of tris(triorganosilyl)methylimidazole derivatives were carried out using organolithium reagent (Me₃Si)₃CLi, prepared via metalation of (Me₃Si)₃CH with methyllithium in tetrahydrofuran, in excellent yields.     

Characterization of Chitosan/Alginate Self-Assembled Nanoparticles as a Protein Carrier

The aim of this study was to evaluate the effect of the polymeric ratios on the characteristics of chitosan/alginate (ch/alg) self-assembled nanoparticles and their potential as protein delivery vehicle. The nanoparticles were prepared using proper mixing of polymers in presence or absence of bovine serum albumin (BSA) as a protein model. Three formulations of nanoparticles comprising ch/alg ratios of 2:1, 1:1, and 1:2 were prepared. Size, shape and zeta potential of the formulations were studied by scanning electron microscopy (SEM) and nanosizer instruments. FTIR, and differential scanning calorimetery (DSC) studies were performed to investigate polymer-polymer or polymer-protein interactions. Release profiles and entrapment efficiencies of the nanoparticles were determined by calorimetric technique using appropriate techniques. Entrapment efficiency was 70% for ch/alg ratio of 1:1, 65% for 1:2, and 60% for 2:1. The z-average size of the nanoparticles were 403, 205, and 318 nm for ch/alg ratios of 2:1, 1:1, and 1:2, respectively. Average zeta potentials were ?47, +15, ?25 mV for 2:1, 1:1, and 1:2 as well. Considering the favorable features required for protein delivery systems, ch/alg (1:1) due to its smallest size, highest loading, and most homogenous shape was regarded as the best ratio.     

An improved progressive preconditioning method for steady non‐cavitating and sheet‐cavitating flows

An improved progressive preconditioning method for analyzing steady inviscid and laminar flows around fully wetted and sheet‐cavitating hydrofoils is presented. The preconditioning matrix is adapted automatically from the pressure and/or velocity flow‐field by a power‐law relation. The cavitating calculations are based on a single fluid approach. In this approach, the liquid/vapour mixture is treated as a homogeneous fluid whose density is controlled by a barotropic state law. This physical model is integrated with a numerical resolution derived from the cell‐centered Jameson's finite volume algorithm. The stabilization is achieved via the second‐and fourth‐order artificial dissipation scheme. Explicit four‐step Runge–Kutta time integration is applied to achieve the steady‐state condition. Results presented in the paper focus on the pressure distribution on hydrofoils wall, velocity profiles, lift and drag forces, length of sheet cavitation, and effect of the power‐law preconditioning method on convergence speed. The results show satisfactory agreement with numerical and experimental works of others. The scheme has a progressive effect on the convergence speed. The results indicate that using the power‐law preconditioner improves the convergence rate, significantly. Copyright © 2010 John Wiley & Sons, Ltd.