Malononitrile-involved Michael addition polymerization: An efficient and facile route for cyano-rich polyesters with programmable thermal and mechanical properties

An efficient, atom-economic, oxygen-tolerant, and water-tolerant strategy has been established to synthesize cyano-rich polyesters. Four kinds of organic bases, 1,1,3,3-tetramethylguanidine (TMG), 4-dimethylaminopyridine, triethylamine, and 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) were explored for accelerating Michael addition polymerization of malononitrile and 1,4-butandiol diacrylate. TMG can promote the polymerization efficiently under mild conditions to quantitatively afford polyester with high-molecular weight and moderate polydispersity. The comparison of the kinetic studies of TMG and TBD reveals that TMG shows better catalytic performance, while the catalysis of TBD brings about oligomers in spite of the higher efficiency at early age of the polymerization. Moreover, other diacrylate compounds could also be quantitatively polymerized to afford polyesters with high molecular weight. When dimethacrylate is chose as the monomer, the polymerization becomes sluggish. All the afforded polyesters display programmable thermal and mechanical properties that are closely related to their chemical structures.     

Investigation of ultraviolet curable waterborne polyurethane acrylate dispersion based on hydroxyl-terminated polybutadiene

A new kind of ultraviolet (UV) curable waterborne polyurethane acrylate dispersion was synthesized based on hydroxyl-terminated polybutadiene (HTPB), poly-(propylene glycol) (PPG), isophorene diisocyanate (IPDI), 2-hydroxy ethyl acrylate (HEA) and dimethylol propionic acid (DMPA) after neutralizing by triethylamine (TEA). 2-Hydroxy-1-[4-2-hydroxyethoxy) phenyl]-2-methyl-1-propanone (Irgacure 2959) was used as a photoinitiator and deionized water as a diluent. Fourier transform infrared (FTIR) analysis was used to identify the chain structure of the UV-curable polyurethane prepolymer based on HTPB and the curing process. Effects of relative content of HTPB and PPG on emulsion stability, resistance to water and ethanol, thermal stability, compatibility of soft and hard segment, as well as the mechanical property of the cured film were investigated. Translated from Polymer Materials Science and Engineering, 2006, 22(3): 199–203 (in Chinese)     

Synthesis of Fluorinated Polyurethane/Polyacrylate Hybrid Emulsion Initiated by 60Co γ-Ray and Properties of the Latex Film

Based on the solvent-free method, novel fluorinated polyurethane/polyacrylate hybrid emulsions, dodecafluoroheptyl methacrylate (DFMA) as fluorinated monomer, were successfully prepared via emulsion polymerization without traditional emulsifier. For the purpose of increasing the grafting ratio of polyurethane and polyacrylate, ⁶⁰Co γ-ray radiation polymerization had been adopted to enhance the hardness of latex film. The chain structure and polymerization progress were confirmed by the analysis of Fourier transform infrared spectroscopy. The grafting ratio of polymethyl methacrylate and polyurethane was obtained by calculating the ratio of N–H peak integral area and Ph(C=C) peak integral area. The effect of DFMA content on thermal stability, mechanical property and water resistance were investigated systematically by thermal weight loss analysis, tensile strength test, absorbed water ratio and water contact angle.     

Equilibrium Studies on Reactive Extraction of α-Cyclohexylmandelic Enantiomers Using Hydrophilic β-Cyclodextrin Derivatives Extractants

β‐Cyclodextrin (β‐CD) is negligibly soluble in organic liquids and can be modified to achieve a higher solubility in water. In this paper, racemic α‐cyclohexyl‐mandelic acid (α‐CHMA) was separated by chiral reactive extraction with aqueous β‐cyclodextrin derivatives. Hydroxypropyl‐β‐cyclodextrin (HP‐β‐CD), hydroxyethyl‐β‐cyclodextrin (HE‐β‐CD), and methyl‐β‐cyclodextrin (Me‐β‐CD) were selected as chiral selectors for reactive extraction of α‐CHMA enantiomers from organic phase to aqueous phase. Factors affecting the extraction efficiency were investigated, including the types of organic solvents and β‐CD derivatives, the concentrations of the chiral selector and α‐CHMA enantiomers, pH and temperature. The experimental results demonstrate that HP‐β‐CD, HE‐β‐CD, and Me‐β‐CD have stronger recognition abilities for S‐α‐CHMA than for R‐α‐CHMA. Among the three derivatives, HP‐β‐CD shows the strongest separation factor for α‐CHMA enantiomers. A high enantioseparation efficiency with a maximum separation factor (α) of 2.02 is observed at pH 2.5 and 5°C.     

Internal flow numerical simulation of a cross‐flow fan in refrigerant operating condition using user‐defined functions

In the paper, a cross‐flow fan in refrigerant operating condition is systematically simulated using user‐defined functions. Three‐dimensional simulations are acquired with Navier–Stokes equations coupled with k–ε turbulence model, and internal flow characteristics of an indoor split‐type air conditioner are obtained, which is mainly composed of cross‐flow fan and heat exchanger. It has systematically been simulated in the isothermal flow condition that the performance of cross‐flow fan may be reduced easily with dry or humid air, and in the refrigerant operating condition in which user‐defined functions are applied to the humid air, considered as a mixture of dry air and vapor. A density‐modulated function is adopted to deal with the condensation of the vapor at the heat‐transfer region approximately. The results show flow mechanism of the two gas‐phase flow, including phase‐vary process. The distribution of the parameters is not uniform at the inlet of the machine, the intensity and position of pressure and velocity vary along the axial direction of the fan, the distribution of vapor volume fraction and turbulent intensity in heat‐transfer region is obtained, and the external characteristic data of the indoor machine are obtained and analyzed. Compared with the experimental data, the calculated characteristic curves and designed parameters are on target. © British Crown Copyright 2010/MOD. Reproduced with permission. Published by John Wiley & Sons, Ltd.     

Novel molecularly imprinted microsphere using a single chiral monomer and chirality-matching (S)-ketoprofen template

We designed and synthesized a cinchonine derivative to be used as a novel chiral monomer. It was employed in a dual role of functional monomer and cross-linking monomer, displaying multi-binding sites for the template (S)-ketoprofen. Monodisperse molecularly imprinted core-shell microspheres were prepared using surface imprinting method on silica gel. The results show a substantial synergistic effect in the enantioselective recognition, confirming our initial hypothesis. Computational simulation of the monomer and template pre-arrangement strongly supports our proposed chiral recognition mechanism for the imprinted microspheres.     

New route to 3-methacryloxypropyltrimethoxysilane-base organic–inorganic hybrid film

A series of poly(3-methacryloxypropyltrimethoxysilane)/waterborne polyurethane (PMPS/WPU) composite latexes and organic–inorganic hybrid films with PMPS contents of 0, 10, 20, 30, 40 and 50 wt.% were prepared via seeded emulsion polymerization initiated by AIBN and hydrolysis–condensation process of PMPS during the evaporation of water, respectively. WPU, that is anionic polyurethane emulsion, was synthesized using isophorone diisocyanate, polytetramethylene ether glycol, dimethylol propionic acid, 1,4-butanediol, and triethylamine. An investigation of transmission electron microscopy confirmed the core–shell morphology of the composite latex particle which was composed of a PMPS core and a polyurethane shell. A dynamic light scattering analysis showed that the average particle size distributed in the range of 42–134 nm. The proposed novel preparation method included the use of polyurethane as macromolecular emulsifier and steric stabilizer, control of (3-methacryloxypropyltrimethoxysilane) (MPS) content less than 50 wt.%, slow addition of MPS and application of AIBN ensured the preparation of a stable PMPS/WPU composite latex. Formed PMPS/WPU organic–inorganic hybrid film with high PMPS content via sol-gel process had uniform transparency at visible band because of less crystalline and phase separation between organic and inorganic phases.     

炔烃的钛氢化反应及产物的立体结构

通过色谱跟踪对炔烃的钛氢化反应进行了研究，反应前期可得到高选择性高产率的顺式烯烃，反应后期可得到高选择性高产率的反式烯烃，控制反应烯烃，控制反应时间，用酮类淬息方法分别得到了一系列新的专一立体构型的烯丙醇衍生物。     

Synthesis and characterization of a new fluorinated polyether glycol prepared by radical grafting of hexafluoropropylene onto polytetramethylene glycol

A new fluorinated polyether glycol (PTMG-g-HFP) was prepared by radical grafting of hexafluoropropylene (HFP) onto polytetramethylene glycol (PTMG) in the presence of different initiators. The structure of PTMG-g-HFP was characterized by means of IR, ¹H NMR and ¹³C NMR. The effects of nature and amount of initiator, reaction time and reaction temperature on grafting HFP onto PTMG were investigated. The results showed di-tert-butyl peroxide (DTBP) was the most efficient in the reaction and the optimal reaction conditions were: [DTBP]₀/[PTMG]₀, 0.12; reaction temperature, 140 °C; reaction time, 6 h.