Determination of total ammonium-nitrogen and free ammonia in a fermentation medium by sequential injection analysis

Summary Automated methods for the determination of ammonium and ammonia are reviewed, and techniques based on gas diffusion using a semi-permeable membrane were selected for the determination of both total ammonium-nitrogen and free ammonia in fermentation samples. A simple and robust instrument based on sequential injection analysis (SIA) consisting of a piston pump and two selector valves was used. Two different methods of ammonia detection, the Berthelot method and detection using pH-indicators, have been evaluated and compared. The indicator method showed higher reproducibility and the range of determination could easily be adjusted to match the concentrations of the samples. The range of determination could be adjusted from 0.05 mmol/l to 350 mmol/l, depending on choice of acceptor solution. This method has been evaluated with fermentation medium samples and tested on-line in a yeast fermentation process.Dedicated to Professor Dr. Wilhelm Fresenius on the occasion of his 80th birthday     

Glass transitions and mixed phases in block SBS

Differential scanning calorimetry (DSC) does not allow for easy determination of the glass‐transition temperature (T_g) of the polystyrene (PS) block in styrene–butadiene–styrene (SBS) block copolymers. Modulated DSC (MDSC), which deconvolutes the standard DSC signal into reversing and nonreversing signals, was used to determine the (T_g) of both the polybutadiene (PB) and PS blocks in SBS. The T_g of the PB block was sharp, at ?92 °C, but that for the PS blocks was extremely broad, from ?60 to 125 °C with a maximum at 68 °C because of blending with PB. PS blocks were found only to exist in a mixed PS–PB phase. This concurred with the results from dynamic mechanical analysis. Annealing did not allow for a segregation of the PS blocks into a pure phase, but allowed for the segregation of the mixed phase into two mixed phases, one that was PB‐rich and the other that was PS‐rich. It is concluded that three phases coexist in SBS: PB, PB‐rich, and PS‐rich phases. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 276–279, 2005     

Domain decomposition for an asymptotic geological fault modeling

We present in this paper a domain decomposition method to treat faults in geological basin modeling. The particularity of this model is that the faults whose widths are very small in comparison with the basin size, are not characterized as subdomains any more but as interfaces between sedimentary blocks. The originality of this work lies in the formulation of this new fault model and in the definition and the computation of the interface conditions between the subdomains. To cite this article: E. Flauraud et al., C. R. Mecanique 331 (2003).     

Influence of cultivation conditions on the production of cellulolytic enzymes withTrichoderma reesei Rutgers C30 in aqueous two-phase systems

Cellulolytic enzyme production in aqueous two-phase systems withTrichoderma reesei Rutgers C30 has been investigated. The influ ence of different phase systems, as well as addition of media compo nents and substrate on enzyme production have been studied. Extractive enzyme production in fed-batch cultivations was per formed in a phase system composed of PEG 8000 5%-Dextran T500 7% with 1% Solka-Floc BW 200 as substrate. The cellulolytic enzyme system was intermittently withdrawn with the top phase. Addition of media components every 24 h and cellulose every 72 h gave an aver age enzyme activity in the withdrawn top phase of 2.2 FPU/mL dur ing 170 h cultivation. The corresponding productivity was 18 FPU/lh. The productivity was increased to 24 FPU/l.h when media compo nents and cellulose were added every 72 h. The average enzyme con centration was then 1.6 FPU/mL. The results are discussed in relation to methods for cellulolytic enzyme production involving immobiliza tion and cell recycling.     

A Network Simulation of High-congestion Road-traffic Flows in Cities with Marine Container Terminals

Port cities where marine cargo terminals are located are generally near urban areas characterized by high-congestion road traffic. Changes in cargo traffic volumes into a marine terminal, or in the surrounding traffic arteries, which carry this traffic, can significantly affect the terminal's operations. Conversely, activity at the terminal can have an impact on the traffic levels and congestion for a considerable distance from the terminal. This paper demonstrates a methodology useful for studying the impact of road traffic flows on marine container terminals located in highly congested areas. This model was developed at the request of the Virginia Center for World Trade and was used to answer three planning questions in the port of Hampton Roads, Virginia, USA-what would be the impact of: opening a new section of interstate highway, a projected doubling of container traffic at one terminal, and a daily unit train in the vicinity of another terminal. The problem was made more challenging by limited data-collection funds. None the less, the model was deemed valid by a panel of traffic experts and officials from several major state and private agencies involved in marine traffic management. The model results were subsequently a factor in two major decisions related to terminal management.     

Thermal and chemical nanofractal relaxation

We studied shape relaxation of nano-fractal islands, during annealing, after their growth from antimony cluster deposition on graphite surface. Annealing at 180^°C shows evidence of an increase of the fractal branch width with time followed by branch fragmentation, without changing the fractal dimension. The time evolution of the width of the arm suggests the surface self-diffusion mechanism as the main relaxation process. With Monte Carlo simulations, we confirmed the observed behavior. Comparison is done with our previous results on fragmentation of nano-fractal silver islands when impurity added to the incident cluster promotes rapid fragmentation by surface self-diffusion enhancement [1].     

Invers-voltammetrische Bestimmung von Chrom(III)

Solutions of Cr(III) salts containing ammonium hydroxide and ammonium salts can be determined after proper pretreatment by inverse voltammetry at carbon paste and glassy carbon electrodes. The determination may be performed, too, with organic solutions of the Cr(III) oxinate. Sensitivity is 5 × 10^?7 M (= 26 ng Cr/ml), standard deviation is in the range of 4–6%.     

Synthesis of silver molybdate clusters driven by laser-annealing

The synthesis of silver rich molybdate clusters is achieved by laser induced chemical reaction of coadsorbed MoO(3) and O(2) molecules on free silver clusters. The reactants MoO(3) and/or O(2) molecules condensed at low temperature (77 K-175 K) on free silver clusters. Then, the silver clusters together with their adsorbed molecules are flashed either ionized with a discharge or ionized and heated by a laser. Then they are cooled down by evaporation. The synthesized chemical compounds are analyzed by a high-resolution time-of-flight mass spectrometer. If only one type of reactant is adsorbed on the cluster, only one oxide molecule is stabilized on the metallic core after the heating and cooling cycle. On the contrary, the coadsorption of the two types of molecules MoO(3) and O(2) on Ag(n) (+), at 77 K, leads to complex aggregates that transform, after laser heating, into a molybdate rich metal clusters. These synthesized species cool down by evaporating silver atoms showing evidence of a binary oxide that is more stable than the metallic core. Moreover we demonstrate that for small size molybdate clusters, a stoichiometric composition may differ from the bulk one.