Chemical characterization and ultrastructure study of pulp fibers

Understanding the ultrastructure and chemical characterization of pulp fibers is highly important in utilizing wood as a raw material in a wide scope of applications, such as forest biomass-based biorefineries and low-cost renewable materials. The observation of the ultrastructure is not possible without advanced microscopy and spectroscopy techniques. Therefore, this study focuses on exploring the ultrastructure of pulp fibers with helium ion microscopy (HIM) and scanning electron microscopy (SEM). For the analysis of chemical characterization in the pulp fibers, Raman spectroscopy, Fourier transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS) were performed. For these studies, the pulp fiber samples were obtained mainly from three different wood species, i.e. spruce, birch and eucalyptus. They were received in the never dried state and dried with a critical point drier (CPD) to minimize pore collapse. The spectroscopy results showed a strong signal from crystalline cellulose and confirmed the absence of lignin after Kraft pulping and bleaching. However, with XPS about 2% of lignin was detected in eucalyptus pulp. The results obtained with the microscopy techniques are compared and indicating the nanofibril size, shape, surface roughness as well as their orientation in pulp fibers. To our knowledge, this is the first time that HIM is applied to study the ultrastructure of pulp fibers and compared against more conventional microscopy and spectroscopy techniques. The main differences between HIM and SEM were found to be related to the focusing and magnification. The individual nano- and microfibrils as well as their bundles were more easily visible with HIM than with SEM. Also, with HIM it was possible to get the total area in focus at once which was not the case with SEM. The increased understanding of the ultrastructure and chemical composition of wood pulp enhance the development of novel wood-based products and processes for their manufacture.     

Parameters to Define the Electron Beam Trajectory of a Double-Tapered Disc-Loaded Wideband Gyro-TWT in Profiled Magnetic Field

In the method of tapering the cross section of the interaction structure for broadbanding a gyro-TWT, the different portions of the interaction length of the tapered-cross-section waveguide become effective for different frequency ranges if the magnetic field and beam parameters are profiled to maintain the condition of electron cyclotron resonance throughout the interaction length. In the present paper, the study of profiling the magnetic field and beam parameters in steps of the stepped analytical model of a double-tapered disc-loaded circular waveguide was made throughout the steps of the model. In the observed profile, the magnetic flux density in a typical step relative to its value in first-step decreases from first-step (gun-end) to end-step (collector-end) of the model considering the up-tapering schemes, in which structure parameters increase from gun-end to collector-end. Also, the transverse beam velocity in a typical step relative to its value in first-step decreases from gun-end to collector-end. However, the Larmor radius in a typical step relative to its value in first-step as well as the hollow-beam radius in a typical step relative to its value in first-step, both increase from gun-end to collector-end in the model considering the up-tapering schemes.     

Effective macroscopic adhesive contact behavior induced by small surface roughness

In this paper we study a model contact problem involving adhesive elastic frictionless contact between rough surfaces. The problem's most notable feature is that it captures the phenomenon of depth-dependent-hysteresis (DDH) (e.g., see Kesari et al., 2010), which refers to the observation of different contact forces during the loading and unloading stages of a contact experiment. We specifically study contact between a rigid axi-symmetric punch and an elastic half-space. The roughness is represented as arbitrary periodic undulations in the punch's radial profile. These undulations induce multiple equilibrium contact regions between the bodies at each indentation-depth. Assuming that the system evolves so as to minimize its potential energy, we show that different equilibrium contact regions are selected during the loading and unloading stages at each indentation-depth, giving rise to DDH. When the period and amplitude of our model's roughness is reduced, we show that the evolution of the contact force and radius with the indentation-depth can be approximated with simpler curves, the effective macroscopic behavior, which we compute. Remarkably, the effective behavior depends solely on the amplitude and period of the model's roughness. The effective behavior is useful for estimating material properties from contact experiments displaying DDH. We show one such example here. Using the effective behavior for a particular roughness model (sinusoidal) we analyze the energy loss during a loading/unloading cycle, finding that roughness can toughen the interface. We also estimate the energy barriers between the different equilibrium contact regions at a fixed indentation-depth, which can be used to assess the importance of ambient energy fluctuations on DDH.     

Pathophysiology of Microwave Radiation: Effect on Rat Brain

The study aims to investigate the effect of 2.45 GHz microwave radiation on Wistar rats. Rats of 35 days old with 130 ± 10 g body weight were selected for this study. Animals were divided into two groups: sham exposed and experimental (six animals each). Animals were exposed for 2 h a day for 45 days at 2.45 GHz frequency (power density, 0.21 mW/cm²). The whole body specific absorption rate was estimated to be 0.14 W/kg. Exposure took place in a ventilated plexiglas cage and kept in an anechoic chamber under a horn antenna. After completion of the exposure period, rats were killed, and pineal gland and whole brain tissues were isolated for the estimation of melatonin, creatine kinase, caspase 3, and calcium ion concentration. Experiments were performed in a blind manner and repeated. A significant decrease (P < 0.05) was recorded in the level of pineal melatonin of exposed group as compared with sham exposed. A significant increase (P < 0.05) in creatine kinase, caspase 3, and calcium ion concentration was observed in whole brain of exposed group of animals as compared to sham exposed. One-way analysis of variance method was adopted for statistical analysis. The study concludes that a reduction in melatonin or an increase in caspase-3, creatine kinase, and calcium ion may cause significant damage in brain due to chronic exposure of these radiations. These biomarkers clearly indicate possible health implications of such exposures.     

Microwave Exposure Affecting Reproductive System in Male Rats

The object of present study is to investigate the effects of 50 GHz microwave frequency electromagnetic fields on reproductive system of male rats. Male rats of Wistar strain were used in the study. Animals 60 days old were divided into two groups—group I sham exposed and group II experimental (microwave exposed). During exposure, rats were confined in Plexiglas cages with drilled ventilation holes for 2 h a day for 45 days continuously at a specified specific absorption rate of 8.0 × 10⁻⁴ W/kg. After the last exposure, the rats were sacrificed immediately and sperms were collected. Antioxidant enzyme (superoxide dismutase (SOD), glutathione peroxidase (GPx), and catalase), histone kinase, apoptosis, and cell cycle were analyzed in sperm cells. Result shows a significant decrease in the level of sperm GPx and SOD activity (p ≤ 0.05), whereas catalase shows significant increase in exposed group of sperm samples as compared with control (p < 0.02). We observed a statistically significant decrease in mean activity of histone kinase as compared to the control (p < 0.016). The percentage of cells dividing in a spermatogenesis was estimated by analyzing DNA per cell by flow cytometry. The percentage of apoptosis in electromagnetic field exposed group shows increased ratio as compared to sham exposed (p < 0.004). There were no significant differences in the G₀/G₁ phase; however, a significant decrease (p < 0.026) in S phase was obtained. Results also indicate a decrease in percentage of G₂/M transition phase of cell cycle in exposed group as compared to sham exposed (p < 0.019). We conclude that these radiations may have a significant effect on reproductive system of male rats, which may be an indication of male infertility.     

A sensitive spectrophotometric method for the determination of dithiocarbamate fungicide and its application in environmental samples

A sensitive spectrophotometric method based on the evolution of CS₂ and colour development by leuco crystal violet is described for the determination of dithiocarbamate fungicides, e.g. thiram, ziram and zineb. Dithiocarbamate fungicides release CS₂ on acid hydrolysis. This CS₂ is absorbed in ethanolic sodium hydroxide and forms xanthate. The xanthate formed is subsequently treated with potassium iodate and N-chlorosuccinimide, during which free iodine is liberated. Crystal violet dye was formed through selective oxidation of leuco crystal violet by liberated iodine, which has an absorbance maxima at 595 nm. The colour systems obey Beer's law in the range of 0.02–0.20, 0.02–0.24 and 0.04–0.32 ppm for thiram, ziram and zineb respectively. The molar absorptivity of the colour system were found to be 9.6×10⁵, 1.1×10⁶ and 6.8×10⁵±100 l mol⁻¹ cm⁻¹ for thiram, ziram and zineb respectively. The method has been successfully applied to the determination of these dithiocarbamate fungicides in various environmental samples.     

A simple method for the spectrophotometric determination of atrazine using p-aminoacetophenone and its application in environmental and biological samples

A spectrophotometric method is described for the determination of the widely used herbicide, atrazine. Atrazine reacts with pyridine and forms a quaternary halide which adds a hydroxyl group in the presence of alkali to form a carbinol base. The heterocyclic ring of the resulting carbinol breaks forming a glutaconic dialdehyde which is subsequently coupled with p-aminoacetophenone (PMP) to form a yellow orange polymethine dye. Beer's law is obeyed in the range 0.16–1.6 ppm of atrazine at 470 nm. The method is sensitive and free from the interference of most of the foreign species. The analytical parameters have been optimised and the method has been successfully applied to the determination of atrazine in various environmental and biological samples.     

Effects of hydroxyapatite nanoparticles on proliferation and apoptosis of human breast cancer cells (MCF-7)

The study aimed to correlate cell proliferation inhibition with oxidative stress and p53 protein expression in cancerous cells. Hydroxyapatite (HAP) (Ca₁₀(PO₄)₆(OH)₂) is the essential component of inorganic composition in human bone. It has been found to have obvious inhibitory function on growth of many kinds of tumor cells and its nanoparticle has stronger anti-cancerous effect than macromolecule microparticles. Human breast cancer cells (MCF-7) were cultured and treated with HAP nanoparticles at various concentrations. Cells viability was detected with MTT colorimetric assay. The morphology of the cancerous cells was performed by transmission electron microscopy and the expression of a cell apoptosis related gene (p53) was determined by ELISA assay and flow cytometry (FCM). The intracellular reactive oxygen species (ROS) level in HAP exposed cells was measured by H₂DCFDA staining. DNA damage was measured by single-cell gel electrophoresis assay. The statistical analysis was done by one way ANOVA. The cellular proliferation inhibition rate was significantly (p < 0.05) increasing in a dose-dependent manner of HAP nanoparticles. Cell apoptotic characters were observed after MCF-7 cells were treated by HAP nanoparticles for 48 h. Moreover, ELISA assay and FCM shows a dose-dependent activation of p53 in MCF-7 cells treated with nanoHAP. These causative factors of the above results may be justified by an overproduction of ROS. In this study, a significant (p < 0.05) increase in the level of intracellular ROS in HAP-treated cells was observed. This study shows that HAP inhibits the growth of human breast cancer MCF-7 cells as well as induces cell apoptosis. This study shows that HAP NPs Induce the production of intracellular reactive oxygen species and activate p53, which may be responsible for DNA damage and cell apoptosis.     

Adhesive Frictionless Contact Between an Elastic Isotropic Half-Space and a Rigid Axi-Symmetric Punch

In this paper we consider the problem of adhesive frictionless contact of an elastic half-space by an axi-symmetric punch. We obtain integral equations that define the tractions and displacements normal to the surface of the half-space, as well as the size of the contact regions, for the cases of circular and annular contact regions. The novelty of our approach resides in the use of Betti’s reciprocity theorem to impose equilibrium, and of Abel transforms to either solve or substantially simplify the resulting integral equations. Additionally, the radii that define the annular or circular contact region are defined as local minimizers of the function obtained by evaluating the potential energy at the equilibrium solutions for each pair of radii. With this approach, we rather easily recover Sneddon’s formulas (Sneddon, Int. J. Eng. Sci., 3(1):47–57, 1965) for circular contact regions. For the annular contact region, we obtain a new integral equation that defines the inverse Abel transform of the surface normal displacement. We solve this equation numerically for two particular punches: a flat annular punch, and a concave punch.     

Analysis of a Disc-Loaded Circular Waveguide for Interaction Impedance of a Gyrotron Amplifier

A rigorous electromagnetic analysis of a circular waveguide loaded with axially periodic annular discs was developed in the fast-wave regime, considering finite axial disc thickness and taking into account the effect of higher order space harmonics in the disc-free region and higher order modal harmonics in the disc-occupied region of the structure. The quality of the disc-loaded circular waveguide was evaluated with respect to its azimuthal interaction impedance that has relevance to the gain of a gyrotron millimeter-wave amplifier (gyro-traveling-wave tube) in which such a loaded waveguide finds application as a wideband interaction structure. The results of electromagnetic analysis of the structure with respect to both the dispersion and azimuthal interaction impedance characteristics were validated against the commercially available code: high frequency structure simulator (HFSS). The analysis predicts that the value of the interaction impedance at a given frequency decreases with the increase of the disc hole radius and disc periodicity. The change of the axial disc thickness does not significantly change the value of the interaction impedance though it shifts the frequency range over which appreciable interaction impedance is obtained. Out of the three disc parameters, namely the disc hole radius, thickness and periodicity, the lattermost is most effective in controlling the value of the azimuthal interaction impedance. However, the passband of frequencies and the center frequency of the passband both decrease with the increase of the disc periodicity. Moreover, the disc periodicity that provides large azimuthal interaction impedance would in general be different from that giving the desired dispersion shape for wideband interaction in a gyro-TWT, suggesting a trade-off in the value of the disc periodicity to be chosen.