Optimization of solid phase dispersive field‐assisted ultrasonication for the extraction of auramine O and crystal violet dyes using central composite design

Simultaneous preconcentration and determination of auramine o (AO) and crystal violet (CV) dyes from aqueous solution was conducted by ultrasound assisted (dispersive) solid phase microextraction (UASPME) based on SnO₂/SnS composite loaded activated carbon (SnO₂/SnS‐NCs‐AC). The prepared of SnO₂/SnS‐NCs‐AC was characterized by FESEM and XRD analysis. Main and interaction influences of operational parameters such as pH, sonication time, amounts of sorbent, and type of eluent on extraction efficiency were investigated by central composite design and optimized with desirability function approach (DFA). ANOVA was conducted and shows that optimized values were found at 15.33 min sonication time, 0.019 g SnO₂/SnS‐NCs‐AC mass, pH 5.46 and among different solvents, dimethyl formamide was selected as an efficient eluent. Under this conditions recoverees percentage were obtained 82.85% and 86.70% for AO and CV, respectively. Based on F‐test under ANOVA all main effect and interaction effect of understudy parameters has the significant effect on the responses. At optimum conditions, limit of detection (0.0015 and 0.001 mg/l), limit of quantitation (0.4 and 0.4 mg/l), limit of linearity (9.0 and 9.0 mg/l), enrichment factor (33.48 and 83.71) and percent relative standard deviation (3.44 and 4.20) were found to be for auramine o and crystal violet dyes, respectively. Finally, the method was successfully applied for the preconcentration and determination of AO and CV in water samples and ER% of 89.0‐97.0 and 96.2–98.0% as acceptable range were found to be for AO and CV samples, respectively.     

An Insight into the Diffusion of Unsaturated Polyester (UP) Resin into Expanded Graphite (EG) to Improve the Mechanical Properties of the UP/EG Composites

Abstract

Polymer/expanded graphite (EG) nanocomposites have great importance in many industrial applications mainly due to their high electrical/thermal conductivity or flame retardancy. However, to fully employ the benefits of polymer/EG nanocomposites one must consider the high degree of porosity of EG. The high degree of porosity of EG can deteriorate the composites’ mechanical properties if the polymer chains cannot diffuse completely into the EG pores. In this article, an insight is given into the diffusion of unsaturated isophthalic polyester (UP) resin, consisting of a combination of maleic anhydride and isophthalic anhydride in the resin backbone, with two viscosities, into the pores of the EG particles of various degrees of porosity. The diffusion experiments were carried out on compressed EG tablets with the same density but different porosity due to the different porosity of the EG particles. The results showed that the diffusion rate of the UP resin with higher viscosity slightly decreased when the EG porosity decreased but, in the opposite way, it strongly increased for the low viscosity UP resin. The EG nanocomposites samples were molded at varying pressures. The micrographs of the fractured surfaces of the EG nanocomposites showed that the EG pores were not filled with resin, thus the EG nanocomposites had residual pores. It was found that composites containing EGs with higher expansion ratio and larger particles and pores showed larger residual pores. Furthermore, the composites prepared with the more viscous UP resin showed more residual pores. By applying a pressure of 10?bar instead of 1?bar, a reduction of 7–20% in the residual pores of the nanocomposites was observed which led to improved mechanical properties by up to 20% in flexural strength for the EG with the highest expansion ratio.     

On the theta completions for maximal subalgebras

Let L be a finite dimensional Lie algebra. Then for a maximal subalgebra M of L, a 𝜃-completion for M is a subalgebra C of L such that CM and M_L?C and C∕M_L contains no non-zero ideal of L∕M_L, properly. And a 𝜃-completion C of M is said to be a strong 𝜃-completion, if C = L or there exists a subalgebra B of L such that C be maximal in B and B is not a 𝜃-completion for M. These are analogous to the concepts of 𝜃-completion and strong 𝜃-completion of a maximal subgroup of a finite group. Now, we consider the influence of these concepts on the structure of a finite dimensional Lie algebra.     

Naphthalimide based disperse dyes for nylon 6 and polyester (pet) fibers: Synthesis and evaluation of technical properties in the presence of urea

Technical properties of two naphthalimide based disperse dyes on nylon 6 and polyester fibers were investigated in the presence of urea.The two naphthalimide based disperse dyes were synthesized.The dyes were purified and then fully characterized using ~1H-NMR,FTIR and melting point analysis.Dispersion of the dyes was prepared in water and applied on nylon 6 and PET fibers.The dyes offered good build-up properties on the substrates.In order to increase dye adsorption of the substrates,urea was added into...     

Investigation of the structural directing effect of (2-hydroxyethyl)trimethylammonium on distribution of the silicate anions using 29Si NMR spectroscopy

The effect of (2-hydroxyethyl)trimethylammonium (2-HETMA) cation on the equilibrium of silicate oligomers in aqueous alkaline silicate solutions was investigated using (29)Si NMR spectra. The results indicate role of structural directing of 2-HETMA in which it particularly directs the silicate species to the Q(4)(1)Q(4)(3)Q(4)(4) silicate anion. Results reveal that composition of the alcohols in solution affect the distribution of anionic species. The effect of methanol concentration is also discussed.     

直观Menger内积空间及其在积分方程中的应用

首先引出和定义了直观的Menger内积空间的概念,然后在完备的直观的Menger内积空间中得出了一个新的不动点定理.作为应用,利用文中所得的结果,研究了线性Volterra积分方程解的存在性和唯一性.     

Investigation of the Morphological and Mechanical Properties of Polyethylene Terephthalate (PET)/Ethylene Propylene Diene Rubber (EPDM) Blends in the Presence of Multi-Walled Carbon Nanotubes

In this study the blends of polyethylene terephthalate (PET)/ethylene propylene diene rubber (EPDM) in the presence of multi-walled carbon nanotubes (MWCNT) (1 and 3?wt %) were prepared by melt compounding in an internal mixer. Mechanical and morphological properties of the nanocomposites were investigated. The thermal behaviors of the PET/EPDM nanocomposites were also investigated, by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The results of the mechanical tests showed that the tensile strength, elastic modulus and the hardness of the blends were increased with increasing CNT, while the impact strength and elongation at break decreased. The DSC and TGA results showed an increase of melting temperature (T_m) and degradation temperature of the nanocomposites with the addition of the carbon nanotubes, because the carbon nanotubes serve both as nucleating agents to increase T_m and prevent the composite from degradation to increase the thermal stability. The microstructure of the composites was evaluated through field emission scanning electron microscopy (FESEM) and the results showed a good distribution of the MWCNT within the polymer blend.     

Methylthiouracil‐modified Carbon Paste Electrode as a New Voltammetric Sensor Based on a 1,4‐Michael Addition Reaction for Detection of Dopamine

A sensitive dopamine sensor was constructed based on the modified carbon paste electrode with methylthiouracil as a nucleophile in the 1,4‐Michael addition reaction. An ECE mechanism was suggested for dopamine oxidation at the modified electrode. Design of experiments was used in the optimization of variables. Under the optimum conditions, calibration graph was linear in the range of 0.20–15.0 µM with a detection limit of 73 nM. The relative standard deviations (n=5) for 0.50 µM of dopamine was 3.83 %. The selectivity of the sensor was also studied. The developed sensor was applied for analysis of pharmaceutical and biological samples.