Chemometric approaches in environmental problems concerning PCDD and PCDF. Data interpretation and source correlation. Mechanisms of formation and destruction in MSW combustion process

Summary The role of multivariate analysis methods in evaluating, rationalizing, and working out complex environmental problems is discussed. The discussion is organized in two sections; a literature analysis of the application of chemometric methods to PCDD/PCDF data interpretation and source correlation and a review of the role of chemometric methods in analysing the results obtained by the Authors studying PCDD/PCDF formation and destruction mechanisms in MSW combustion processes.     

New pi-extended water-soluble squaraines as singlet oxygen generators

[graph: see text] Condensation of squaric acid with a number of differently substituted 2-pyrrolyl derivatives afforded three new classes of squaraines. Their sharp and intense absorption bands in the biological window (700-900 nm), inherent singlet oxygen generation capabilities, together with proper functionalization allowing good water solubility make them suitable candidates as new non-porphyrinic singlet oxygen photosensitizers for photodynamic therapy (PDT).     

Recognition of partially overlapped particle images using the Kohonen neural network

A neural network is proposed for the recognition of partially overlapped particle images in the analysis of Particle Tracking Velocimetry (PTV) frames. The Kohonen neural network is an approximation to an optimum classifier. In this work it allows single particle images to be distinguished from overlapped particle images by shape analysis: it classifies 99.1% of the spots correctly (in test images). If a spot has an almost circular shape, the barycenter co-ordinates are extracted. If the spot shape is far from being circular, it is believed to be a particle overlap, and a procedure to find more centroids is activated.The particle recognizer based on the Kohonen neural network is tested on both multi-exposed and single-exposure images at high particle density, and compared to a particle recognizer that did not consider the partial overlap. The management of overlapped particles causes the neural network to produce a big improvement in the number of barycenters that can be extracted from these images. The practical consequence is that the seeding density in PTV can be increased, so as to improve the spatial resolution of the technique in the velocity field calculation.Marcello Sallusti and Paolo Monti produced the synthetic PTV images that were used in this project. Gianni Leuzzi helped clearing the statistic properties of the neural network through infinite discussions. We would like to thank them all, since we are aware that they all gave a decisive contribute to the project.     

Fast atom bombardment mass spectrometric analysis of the partial ozonolysis products of poly(isoprene) and poly(chloroprene)

The low molecular weight compounds formed by partial ozonolysis of poly(isoprene) and poly(chloroprene) were analyzed by fast atom bombardment mass spectrometry (FABMS). In the poly(chloroprene) case, the ozonized mixtures were treated with piperidine before the MS analysis to transform in amide end groups the reactive acyl chlorides formed by the cleavage of double bonds along the main chain. Only one family of compounds having carboxyl and ketone or carboxyl and amide end groups were obtained from the ozonolysis of poly(isoprene) and poly(chloroprene), respectively. The assigned structures were confirmed by FAB-MS analysis of the GPC separation fractions [poly(chloroprene)] or by FAB-MS of the KOH-doped ozonolysis mixtures [poly(isoprene)]. It has been also ascertained, by GPC experiments, that poly(chloroprene) decomposes more rapidly than poly(isoprene) and poly(butadiene).     

Structural and Transport Properties of Mg1−xMnxMn2O4±δ Spinels

The synthesis and structural properties of Mg_1−xMn_2+xO₄, for 0≤x≤1 are described. Complete miscibility in the solid state exists for this system. For the material with the correct stoichiometry, i.e. MgMn₂O₄, the effect of temperature on the cation distribution was investigated= above 600°C the inversion degree (m) starts increasing. The electrical conductivity shows a small dependence on P(O₂) which is consistent with the small oxygen non-stoichiometry determined by means of thermogravimetry. The main contribution to the transport properties arises from the inversion equilibrium. Two distinct conductivity regimes, below and above the inversion threshold, can be assumed to explain the electrical conductivity and thermoelectric power results.     

12H-naphtho[1′,2′:5,6]pyrano[2,3-d]pyrimidine derivatives

Reaction of 1-oxo-2-formyl-3-dimethylamino-1H-naphtho[2,1-b]pyran with amidines, guanidine, O-methylisourea, S-methylisothiourea afforded 9-substituted 12-oxo-12H-naphtho[1′,2′:5,6]pyrano[2,3-d]pyrimidines. When the reaction with O-methylisourea was carried out in anhydrous pyridine, 10,20-dioxo-10H,20H-dinaphtho[1,2-e:1′,2′-e′][1,5]diazocino[2,3-b:6,7-b′]dipyran was formed.     

Accurate redetermination of the X-ray structure and electronic bonding in adenosylcobalamin

The electronic structure of adenosylcobalamin (B12 coenzyme, AdoCbl) has been calculated by a density functional method, using the orthogonalized linear combination of the atomic orbital method (OLCAO). Since a fixed accurately determined geometry was needed in such calculations, the crystal structure of adenosylcobalamin has been redone and refined to R = 0.065, using synchrotron diffraction data. Comparison with the recently reported electronic structures of cyano- (CNCbl) and methylcobalamin (MeCbl) shows that the net charges and bond orders vary only on the axial donors. The values in the three cobalamins suggest that the Co-C bond in MeCbl has a strength similar to that in AdoCbl, but it is significantly weaker that that in CNCbl. Present results are compared with those previously reported for the analogous corrin derivatives; i.e., simplified cobalamins with the side chains a-f replaced by H atoms. Despite a qualitative agreement, a discrepancy in the calculated HOMO-LUMO gap is found.     

Nonlinear forecasting and iterated function systems

The theory of dynamical forecasting can be extended to iterated function systems. An unordered set of iterates may be sufficient to construct a simulation of the unknown dynamics. The underlying dynamical system may be nondeterministic: A random element may be allowed in the dynamics, and retrieved by our proposed procedures. A first application of these extensions pertains to the reconstruction of fractal attractors, and allows us to solve the so-called inverse problem in Iterated Functions Systems.     

A Specific HPLC Method to Determine Residual HEPES in [68Ga]Ga-Radiopharmaceuticals: Development and Validation

Background: Nowadays, in Nuclear Medicine, clinically applied radiopharmaceuticals must meet quality release criteria such as high radiochemical purity and radiochemical yield. Many radiopharmaceuticals do not have marketing authorization and have no dedicated monograph within European Pharmacopeia (Ph. Eur.); therefore, general monographs on quality controls (QCs) have to be applied for clinical application. These criteria require standardization and validation in labeling and preparation, including quality controls measurements, according to well defined standard operation procedures. However, QC measurements are often based on detection techniques that are specific to a certain chromatographic system. Several radiosyntheses of [⁶⁸Ga]Ga-radiopharmaceuticals are more efficient and robust when they are performed with 2-[4-(2-hydroxyethyl)piperazin-1-yl] ethanesulfonic acid (HEPES) buffer, which is considered as an impurity to be assessed in the QC procedure, prior to clinical use. Thus, Ph. Eur. has introduced a thin-layer chromatography (TLC) method to quantify the HEPES amount that is present in [⁶⁸Ga]Ga-radiopharmaceuticals. However, this is only qualitative and has proven to be unreliable. Here we develop and validate a new high-performance liquid chromatography (UV-Radio-HPLC) method to quantify the residual amount of HEPES in ⁶⁸Ga-based radiopharmaceuticals. Method: To validate the proposed UV-Radio-HPLC method, a stepwise approach was used, as defined in the guidance document that was adopted by the European Medicines Agency (CMP/ICH/381/95 2014). The assessed parameters are specificity, linearity, precision (repeatability), accuracy, and limit of quantification. A range of concentrations of HEPES (100, 80, 60, 40, 20, 10, 5, 3 μg/mL) were analyzed. Moreover, to test the validity and pertinence of our new HPLC method, we analyzed samples of [⁶⁸Ga]Ga-DOTATOC; [⁶⁸Ga]Ga-PSMA; [⁶⁸Ga]Ga-DOTATATE; [⁶⁸Ga]Ga-Pentixafor; and [⁶⁸Ga]Ga-NODAGA-Exendin-4 from different batches that were prepared for clinical use. Results: In the assessed samples, HEPES could not be detected by the TLC method that was described in Ph. Eur. within 4 min incubation in an iodine-saturated chamber. Our developed HPLC method showed excellent linearity between 3 and 100 μg/mL for HEPES, with a correlation coefficient (R²) for calibration curves that was equal to 0.999, coefficients of variation (CV%) < 2%, and percent deviation value of bias from 100% to 5%, in accordance with acceptance criteria. The intra-day and inter-day precision of our method was statistically confirmed and the limit-of-quantification (LOQ) was 3 μg/mL, confirming the high sensitivity of the method. The amount of HEPES that was detected with our developed HPLC method in the tested [⁶⁸Ga]Ga-radiopharmaceuticals resulted well below the Ph. Eur. limit, especially for [⁶⁸Ga]Ga-NODAGA-Exendin-4. Conclusions: The TLC method that is described in Ph. Eur. to assess residual HEPES in [⁶⁸Ga]-based radiopharmaceuticals may not be sufficiently sensitive and thus unsuitable for QC release. Our new HPLC method was sensitive, quantitative, reproducible, and rapid for QCs, allowing us to exactly determine the residual HEPES amount in [⁶⁸Ga]Ga-radiopharmaceuticals for safe patient administration.