Estimation of growth rate in unidirectionally solidified multicrystalline silicon by the growth-induced striation method

Multicrystalline silicon was grown by unidirectional solidification method using the accelerated crucible rotation technique. The application of the accelerated crucible rotation technique in unidirectional solidification method induced growth striations across the axial direction of the grown crystal. This striation pattern was observed from carbon concentration distribution, obtained by using Fourier transform infrared spectroscopy. The generated striation pattern was found to be weak and discontinuous. Some striations were absent, probably due to back melting, caused during each crucible rotation. From the growth striations and applied time period in crucible rotation, the growth rate was estimated by using Fourier transformation analysis.     

Investigating laser rapid manufacturing for Inconel-625 components

This paper presents an investigation of laser rapid manufacturing (LRM) for Inconel-625 components. LRM is an upcoming rapid manufacturing technology, it is similar to laser cladding at process level with different end applications. In general, laser-cladding technique is used to deposit materials on the substrate either to improve the surface properties or to refurbish the worn out parts, while LRM is capable of near-net shaping the components by layer-by-layer deposition of the material directly from CAD model. In the present study, a high-power continuous wave (CW) CO₂ laser system, integrated with a co-axial powder-feeding system and a three-axis workstation were used. The effect of processing parameters during LRM of Inconel-625 was studied and the optimum set of parameters for the maximum deposition rate was established employing Orthogonal L9 array of Taguchi technique. Results indicated that the powder feed rate and the scan speed contributed about 56% and 26%, respectively to the deposition rate, while the influence of laser power was limited to 10% only. Fabricated components were subjected to non-destructive testing (like—ultrasonic testing, dye-penetrant testing), tensile testing, impact testing, metallographic examinations and micro-hardness measurement. The test results revealed defect-free material deposition with improved mechanical strength without sacrificing the ductility.     

On composition of some general fractional integral operators

In the present paper we derive three interesting expressions for the composition of two most general fractional integral oprators whose kernels involve the product of a general class of polynomials and a multivariableH-function. By suitably specializing the coefficients and the parameters in these functions we can get a large number of (new and known) interesting expressions for the composition of fractional integral operators involving classical orthogonal polynomials and simpler special functions (involving one or more variables) which occur rather frequently in problems of mathematical physics. We have mentioned here two special cases of the first composition formula. The first involves product of a general class of polynomials and the Fox’sH-functions and is of interest in itself. The findings of Buschman [1] and Erdélyi [4] follow as simple special cases of this composition formula. The second special case involves product of the Jacobi polynomials, the Hermite polynomials and the product of two multivariableH-functions. The present study unifies and extends a large number of results lying scattered in the lierature. Its findings are general and deep.     

Evaluation of the drag force by integrating the energy dissipation rate in stokes flow for 2D domains using the FEM

The total drag force on the surface of a body, which is the sum of the form drag and the skin friction drag in a 2D domain, is numerically evaluated by integrating the energy dissipation rate in the whole domain for an incompressible Stokes fluid. The finite element method is used to calculate both the energy dissipation rate in the whole domain as well as the drag on the boundary of the body. The evaluation of the drag and the energy dissipation rate are post-processing operations which are carried out after the velocity field and the pressure field for the flow over a particular profile have been obtained. The results obtained for the flow over three different but constant area profiles—a circle, an ellipse and a cross-section of a prolate spheroid—with uniform inlet velocity are presented and it is shown that the total drag force times the velocity is equal to the total energy dissipation rate in the entire finite flow domain. Hence, by calculating the energy dissipation rate in the domain with unit velocity specified at the far-field boundary enclosing the domain, the drag force on the boundary of the body can be obtained.     

Stereospecific approach to α,β-disubstituted nitroalkenes via coupling of α-bromonitroalkenes with boronic acids and terminal acetylenes

(Z)-α-Bromo-β-substituted nitroethylenes undergo facile Suzuki coupling with aryl, heteroaryl, and vinylboronic acids in the presence of Pd(PPh₃)₄ as catalyst to afford (E)-α,β-disubstituted nitroethylenes in high yield (up to 95%) and complete specificity. Similar coupling of α-bromonitroethylenes with terminal acetylenes (Sonogashira coupling) provides a novel route to (E)-nitroenynes. These Pd-catalyzed coupling methods offer a convenient and stereospecific entry into a diverse array of synthetically and biologically useful α,β-disubstituted nitroethylenes.     

Tailoring approach for exploring electron densities and electrostatic potentials of molecular crystals

Experimental and theoretical studies of electron densities and the corresponding derived entities such as electrostatic potentials have been the primary means of understanding the chemical nature and electronic properties of crystalline substances. Conventional crystal calculation methods such as the embedded cluster models are capable of performing calculations on small and medium-sized molecules, while periodic ab initio methods can treat crystals with up to 200 atoms per unit cell. A linear scaling method, viz. the molecular tailoring approach, has recently been developed for obtaining ab initio quality one-electron properties. In the present study, the molecular tailoring approach is employed to generate electron density, electrostatic potential and interaction density maps with the ibuprofen crystal as a test case. The interaction density and electrostatic potential maps produced in the present work succinctly bring out the actual crystalline environment around a given reference molecule by including the interactions with atoms in its neighborhood. The results obtained from the molecular tailoring approach may thus be expected to enhance our understanding of the environment in the crystalline material with reasonably small computational effort.Contribution to the Jacopo Tomasi Honorary Issue     

Iodometric microdetermination of carboxyl function by indirect and direct procedures

Two iodometric procedures have been described for the microdetermination of certain organic acids which can be adopted for evaluating 0.03–0.1 meq of these acids. These methods consist of treating the acid sample with an excess of neutral potassium iodide and iodate. In the indirect method the iodate used up is measured whereas the direct procedure is based on the titration of the liberated iodine. The latter procedure has been applied to determine acids in a water-alcohol medium also. The effect of various factors influencing the stoichiometry of the reactions involved has also been studied.     

Design and development of a common synthetic strategy for a variety of 1-N-iminosugars

[formula: see text] A new synthetic strategy has been developed for a general approach toward the synthesis of a variety of 1-N-iminosugar-type glycosidase inhibitors utilizing precursors developed by the PET-mediated cyclization of alpha-trimethylsilylmethylamine radical cation to a tethered pi-functionality.