Metal Catalyzed Polymerization: From Stereoregular Poly(α-olefins) to Tailor-Made Biodegradable/Biorenewable Polymers and Copolymers

Metal catalyzed polymerizations are among the most important chemical reactions, accounting for the production of about 400 million tons per year of polymeric materials, 50 % of which are polyolefins. The CIRCC research units at the University of Salerno, founded by the late Professor Adolfo Zambelli, a coworker of Giulio Natta and a pioneer in the studies of stereospecific polymerization catalysts, has a consolidated expertise in this field. Although often considered a “mature” area of research, olefin polymerization catalysis continues to drive great interest of both industrial and academic scientists. On the other hand, strong political and economic pressure toward the development of “green” and possibly biodegradable alternatives to olefin-based polymers stimulated our group to direct increasing research efforts in the area of sustainable polymers. In this perspective, we focus on the most recent work from the CIRCC research units involved in homogeneous catalysis for polymerization of a variety of monomers, with the aim to address how the concepts and the expertise developed for olefin polymerization can be applied to the development of different metal-catalyzed polymerizations and copolymerizations. Of course, although the results are discussed in the frame of the most important literature contributions, a comprehensive review of such a wide and diversified topic is out of the scope of the paper. References to reviews covering the different types of metal catalyzed polymerizations are provided in each chapter.     

Polymerization of 1-vinylcyclohexene in the presence of group 4 metallocenes – MAO catalysts

1-Vinylcyclohexene was polymerized in the presence of several homogeneous catalytic systems consisting of methylaluminoxane and group 4 metallocenes such as CpTiCl₃, [isopropyl(cyclopentadienyl)(1-fluorenyl)]ZrCl₂,rac-[ethylenebis(1-indenyl)] ZrCl₂, (CH₃)₂Si(Cp)₂ZrCl₂, CpZrCl₃. The structure of the polymers depends on the catalyst. In fact, with CpTiCl₃, [isopropyl(cyclopentadienyl)(1-fluorenyl)]ZrCl₂ and rac-[ethylenebis-(1-indenyl)]ZrCl₂ the polymers are chemo-, regio- and stereoregular with 1,4 cis, 1,4 trans and 1,2 isotactic structure, respectively.     

On the Thermal Instability of Selected TLC-Type Alkyl Chemically Bonded Stationary Phases and on its Physical Implications

JPC – Journal of Planar Chromatography – Modern TLC - In this paper we report our most recent experimental results relating to the thermal instability of selected alkyl chemically...     

The pivotal role of symmetry in the ruthenium-catalyzed ring-closing metathesis of olefins

The synthesis of Ru-based precatalysts with N-heterocyclic carbene (NHC) ligands bearing syn- and anti-methyl groups on the NHC backbone and aryl N-substituents with differing steric bulk was carried out. The catalytic behavior of the monophospine Ru precatalysts (7a, 7b, 8a, and 8b) was compared to the corresponding family of phosphine-free catalysts (9a, 9b, 10a and 10b) in the ring-closing metathesis (RCM) of olefins. These catalysts showed high efficiency in RCM reactions and the syn-isomers 7a and 9a, in particular, proved to be among the most active catalysts in the formation of tetrasubstituted olefins through RCM. DFT studies on the entire RCM catalytic cycle of hindered olefins were performed to rationalize the different behaviors of catalysts with syn- and anti-methyl groups on the NHC backbone. Theoretical results not only disclosed how NHC symmetry influences the overall activity of the catalyst, but also gave relevant and more general indications on the crucial steps of the RCM of olefins.     

Ring opening polymerization of lactide promoted by alcoholyzed heteroscorpionate aluminum complexes

The alcoholysis of the heteroscorpionate methyl aluminum complex (bpzmp)AlMe₂ ( 1 ) (bpzmp = 2,4‐di‐tert‐butyl‐6‐(bis‐(3,5‐dimethylpyrazol‐1‐yl)methyl)phenoxo), promoted both by phenol and isopropanol, has been investigated. The reaction of 1 with phenol afforded the dimeric mono(phenoxo) derivative 2 , whereas the alcoholysis of 1 with the less acidic isopropanol involved the coordinated heteroscorpionate ligand and led to the tetrahedral complex 3 in which the aluminum atom is surrounded by one κ²‐N,O^? coordinated bpzmp ligand and one η¹‐O^? coordinated ppzmp ligand (ppzmp = 2,4‐di‐tert‐butyl‐6‐(i‐propoxy‐(3,5‐dimethylpyrazol‐1‐yl)methyl)phenoxo). Complexes 1 – 3 have been tested in the ring opening polymerization (ROP) of L ‐lactide. The dimeric mono(phenoxo) derivative 2 was inactive in the ROP of L ‐lactide. Quite surprisingly, complex 3 was found to be active in ROP of L ‐ and rac‐lactide, showing a good molar‐mass control. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3632–3639, 2010     

Application of BDD thin film electrode for electrochemical decomposition of heterogeneous aromatic compounds

The aim of the presented study is to investigate the applicability of electrochemical oxidation of aromatic compounds containing heteroatoms, e.g. waste from production of pesticides or pharmaceutics, at a borondoped diamond (BDD) electrode. The BDD electrodes were synthesized by microwave plasma enhanced chemical vapour deposition (MW PE CVD). Investigation of the electrode surface by optical microscopy and scanning electron microscopy (SEM) confirmed that the synthesized layer was continuous and formed a densely packed grain structure with an average roughness of less than 0:5 ??m. The influence of important electrochemical parameters: current density, kind of reactor, pH or mixing operation, on the efficiency of the oxidation was investigated. The fouling of electrode??s surface caused by the deposition of organic material was observed during CV and galvanostatic experiments. At low current density the oxidation rate constant k was low, but the current efficiency was relatively high. The BDD can be used successfully to remove heterogeneous aromatic compounds existing either as molecules or cations. During 4 h of electrolysis 95% of aromatic compounds were electrochemically decomposed to mineral forms. It was observed that the influence of the initial pH on mineralization was marginal.     

Circulating hemocytes from larvae and adults of Carabus (Chaetocarabus) lefebvrei Dejean 1826 (Coleoptera, Carabidae): cell types and their role in phagocytosis after in vivo artificial non-self-challenge

Carabus lefebvrei Dejean 1826 is an helicophagous Italian endemic ground beetle that lives in central and south Apennines mountain forests, from lower altitudes to about 1500 m. In ground beetles, no morphofunctional data about immune system is available, even though they are well known both taxonomically and ecologically and they have been often used as indicators of the habitat quality due to their specificity to certain habitat types. In the current investigation the cellular population in the hemolymph of adult and third instar larvae of C. lefebvrei has been characterized by means of light and electron microscopy analysis and phagocytosis assays were performed in vivo by injection of 0.9 microm carboxylate-modified polystyrene latex beads in order to identify the hemocyte types involved in phagocytosis. Four morphotypes of circulating hemocytes were found both in larvae and in adults: prohemocytes, granulocytes, oenocytoids and plasmatocytes. After in vivo artificial non-self-challenge treatments, C. lefebvrei showed a non-specific immune response involving phagocytosis performed by plasmatocytes, both in adults and in larvae and by oenocitoids in larvae. In untreated animals, the hemocyte type presenting a firm phagocytic activity, the plasmatocytes, presented a percentage significantly higher in larvae than in adults, and after latex beads injections in larvae there was a tendency of significant difference in plasmatocyte percentage compared to controls injected with phosphate saline buffer. We think that these differences could be correlated with the peculiar morphology (less chitinization) and ecology of larval stages that are more sensitive to pathogens than adults.     

Oxygen self-doping in hollandite-type vanadium oxyhydroxide nanorods

A nonaqueous liquid-phase route involving the reaction of vanadium oxychloride with benzyl alcohol leads to the formation of single-crystalline and semiconducting VO 1.52(OH) 0.77 nanorods with an ellipsoidal morphology, up to 500 nm in length and typically about 100 nm in diameter. Composition, structure, and morphology were thoroughly analyzed by neutron and synchrotron powder X-ray diffraction as well as by different electron microscopy techniques (SEM, (HR)TEM, EDX, and SAED). The data obtained point to a hollandite-type structure which, unlike other vanadates, contains oxide ions in the channels along the c-axis, with hydrogen atoms attached to the edge-sharing oxygen atoms, forming OH groups. According to structural probes and magnetic measurements (1.94 mu B/V), the formal valence of vanadium is +3.81 (V (4+)/V (3+) atomic ratio approximately 4). The experimentally determined density of 3.53(5) g/cm (3) is in good agreement with the proposed structure and nonstoichiometry. The temperature-dependent DC electrical conductivity exhibits Arrhenius-type behavior with a band gap of 0.64 eV. The semiconducting behavior is interpreted in terms of electron hopping between vanadium cations of different valence states (small polaron model). Ab initio density-functional calculations with a local spin density approximation including orbital potential (LSDA + U with an effective U value of 4 eV) have been employed to extract the electronic structure. These calculations propose, on the one hand, that the electronic conductivity is based on electron hopping between neighboring V (3+) and V (4+) sites, and, on the other hand, that the oxide ions in the channels act as electron donors, increasing the fraction of V (3+) cations, and thus leading to self-doping. Experimental and simulated electron energy-loss spectroscopy data confirm both the presence of V (4+) and the validity of the density-of-states calculation. Temperature-dependent magnetic susceptibility measurements indicate strongly frustrated antiferromagnetic interactions between the vanadium ions. A model involving the charge order of the V (3+) sites is proposed to account for the observed formation of the magnetic moment below 25 K.