Sage,Salvia officinalis L., Constituents,Hepatoprotective Activity,and Cytotoxicity Evaluations of the Essential Oils Obtained from Fresh and Differently Timed Dried Herbs: A Comparative Analysis

Sage, Salvia officinalis L., is used worldwide as an aromatic herb for culinary purposes as well as a traditional medicinal agent for various ailments. Current investigations exhibited the effects of extended dryings of the herb on the yields, composition, oil quality, and hepatoprotective as well as anti-cancer biological activities of the hydrodistillation-obtained essential oils from the aerial parts of the plant. The essential oils’ yields, compositions, and biological activities levels of the fresh and differently timed and room-temperature dried herbs differed significantly. The lowest yields of the essential oil were obtained from the fresh herbs (FH, 631 mg, 0.16%), while the highest yield was obtained from the two-week dried herbs (2WDH, 1102 mg, 0.28%). A notable decrease in monoterpenes, with increment in the sesquiterpene constituents, was observed for the FH-based essential oil as compared to all the other batches of the essential oils obtained from the different-timed dried herbs. Additionally, characteristic chemotypic constituents of sage, i.e., α-pinene, camphene, β-pinene, myrcene, 1, 8-cineole, α-thujone, and camphor, were present in significantly higher proportions in all the dried herbs’ essential oils as compared to the FH-based essential oil. The in vivo hepatoprotective activity demonstrated significant reductions in the levels of AST, ALT, and ALP, as well as a significant increase in the total protein (p < 0.05) contents level, as compared to the acetaminophen (AAP) administered experimental group of rats. A significant reduction (p < 0.05) in the ALT level was demonstrated by the 4WDH-based essential oil in comparison to the FH-based essential oil. The levels of creatinine, cholesterol, and triglycerides were reduced (p < 0.05) in the pre-treated rats by the essential oil batches, with non-significant differences found among them as a result of the herbs dryings based oils. A notable increase in the viability of the cells, and total antioxidant capacity (TAOxC) levels, together with the reduction in malondialdehyde (MDA) levels were observed by the essential oils obtained from all the batches as compared with the AAP-treated cell-lines, HepG-2, HeLa, and MCF-7, that indicated the in vitro hepatoprotective effects of the sage essential oils. However, significant improvements in the in vivo and in vitro hepatoprotective activities with the 4WDH-based oil, as compared to all other essential oil-batches and silymarin standard demonstrated the beneficial effects of the drying protocol for the herb for its medicinal purposes.     

Phytochemical Analysis,Pharmacological and Safety Evaluations of Halophytic Plant,Salsola cyclophylla

Salsola cyclophylla, an edible halophyte, is traditionally used for inflammation and pain. To confirm the claimed anti-inflammatory and analgesic properties, a detailed study on respective pharmacological actions was undertaken. The activities are contemplated to arise from its phytoconstituents. The LC-MS analysis of S. cyclophylla 95% aqueous-ethanolic extract revealed the presence of 52 compounds belonging to phenols, flavonoids, coumarins, and aliphatics class. A high concentration of Mn, Fe, and Zn was detected by atomic absorption spectroscopic analysis. The ethyl acetate extract showed the highest flavonoid contents (5.94 ± 0.04 mg/g, Quercetin Equivalents) and Fe2⁺-chelation (52%) potential with DPPH radicals-quenching IC₅₀ at 1.35 ± 0.16 mg/mL, while the aqueous ethanolic extract exhibited maximum phenolics contents (136.08 ± 0.12 mg/g, gallic acid equivalents) with DPPH scavenging potential at IC₅₀ 0.615 ± 0.06 mg/mL. Aqueous ethanolic extract and standard quercetin DPPH radicals scavenging’s were equal potent at 10 mg/mL concentrations. The aqueous ethanolic extract showed highest analgesic effect with pain reduction rates 89.86% (p = 0.03), 87.50% (p < 0.01), and 99.66% (p = 0.0004) after 60, 90, and 120 min, respectively. Additionally, aqueous ethanolic extract exhibited the highest anti-inflammation capacity at 41.07% (p < 0.0001), 34.51% (p < 0.0001), and 24.82% (p < 0.0001) after 2, 3, and 6 h of extract’s administration, respectively. The phytochemical constituents, significant anti-oxidant potential, remarkable analgesic, and anti-inflammatory bioactivities of extracts supported the traditionally claimed anti-inflammatory and analgesic plant activities.     

Anti-Microbial,Anti-Oxidant,and α-Amylase Inhibitory Activity of Traditionally-Used Medicinal Herbs: A Comparative Analyses of Pharmacology,and Phytoconstituents of Regional Halophytic Plants’ Diaspora

Halophytes are the category of plants growing under harsh conditions of super-salinity, and are wide-spread in the coastal Mediterranean climatic conditions and desert oasis. They are adept at surviving through maintaining excessive production of enzymatic, and non-enzymatic secondary metabolites, especially phenolics and flavonoids that primarily work as anti-oxidants and phytoalexins. Five major halophyte species growing in the kingdom’s Qassim’s high-salted desert regions were investigated for confirming their traditionally used biological activity of sugar-control and anti-infectious properties. In this context, the comparative presence of phenolics, and flavonoids together with anti-microbial, anti-oxidants, and the anti-diabetic potentials of the plants’ extracts were investigated through the α-amylase inhibition method. The highest concentrations of phenolics and flavonoids were detected in Salsola imbricata (360 mg/g of the extract as Gallic-Acid-Equivalents/GAE, and 70.5 mg/g of the extract as Rutin-Equivalents/RE). In contrast, the lowest concentrations of phenolics and flavonoids were detected in Salsola cyclophylla (126.6 mg/g GAE, and 20.5 mg/g RE). The halophytes were found rich in trace elements, a factor for water-retention in high-salinity plants, wherein iron and zinc elements were found comparatively in higher concentrations in Aeluropus lagopoides (4113 µg/kg, and 40.1 µg/kg, respectively), while the copper was detected in higher concentration (11.1 µg/kg) in S. imbricata, analyzed through Inductively Coupled Plasma Optical Emission Spectrometric (ICP-OES) analysis. The anti-oxidant potentials and α-amylase enzyme inhibition-based anti-diabetic activity of S. imbricata was significantly higher than the other halophytes under study, wherein S. cyclophylla exhibited the lowest level of α-amylase inhibition. The maximum DPPH radicals’ (52.47 mg/mL), and α-amylase inhibitions (IC₅₀ 22.98 µg/mL) were detected in A. lagopoides. The anti-microbial activity against the Methicillin-Resistant Staphylococcus aureus was strongly exhibited by Zygophyllum simplex (33 mm Inhibition Zone-Diameter, 50 µg/mL Minimum-Inhibitory-Concentration), while Escherichia coli, Enterococcus faecalis, and Candida albicans growths were moderately inhibited by Tamarix aphylla. The current findings exhibited significant differences among the locally distributed halophytic plants species with regards to their bioactivity levels, anti-oxidant potentials, and the presence of trace elements. The ongoing data corroborated the plants’ traditional uses in infections and diabetic conditions. The enhanced local distribution of the plants’ diaspora and higher density of occurrence of these plants species in this region, in comparison to their normal climatic condition’s counterparts, seemed to be affected by humans’ use of the species as part of the traditional and alternative medicine over a period of long time.     

Relative orientation constraints in the nonlinear large displacement analysis: application to soft materials

This study dealt with the dynamic stability and geometrical nonlinear problems of carbon nanotube/fiber/polymer composite (CNTFPC) cylindrical panels without or with delamination around a central cutout. A multiscale analysis using the Hewitt and Malherbe model was performed to determine the carbon nanotube (CNT) weight ratios, thickness–radius ratios, thickness–length ratios, and delamination area ratios around a cutout. A delamination around a central cutout was modeled in two dimensions by introducing continuity conditions of displacements at the delamination boundaries. The proposed approach in this study has been verified by previous studies. Parametric results showed the significance of a proper CNT ratio and curvature for better structural performance on the dynamic instability and nonlinearity of delaminated CNTFPC cylindrical panels.

     

Cross-section deformation,geometric stiffening,and locking in the nonlinear vibration analysis of beams

Nonlinear Dynamics - Stiff behavior of more general finite element (FE) beam formulations in some problems can be misinterpreted as locking based on comparison with simplified analytical and/or...     

High‐Temperature Study of 2‐Methyl Furan and 2‐Methyl Tetrahydrofuran Combustion

The ignition behavior of methyl furan (2‐MF) and methyl tetrahydrofuran (2‐MTHF) is investigated using the shock tube technique. Experiments are carried out using homogeneous gaseous mixtures of fuel, oxygen, and argon with equivalence ratios, ?, of 0.5, 1.0, and 2.0 at average pressures of 3 and 12 atm over a temperature range of 1060–1300 K. In addition to ignition delay time measurements, fuel concentration time histories during ignition and pyrolysis of 2‐MTHF are obtained by means of laser absorption spectroscopy using a He–Ne laser at a fixed wavelength of 3.39 µm. With respect to ignition delay times, it is observed that under similar conditions of equivalence ratio and argon/oxygen ratio (D), 2‐MTHF has longer ignition delay times than 2‐MF at 3 atm. In addition, 2‐MTHF has longer ignition delay times than 2‐MF at higher temperatures for the case of 12 atm and under the same conditions of ? and D. The higher reactivity of 2‐MF, as indicated by shorter ignition delay times, is attributed to differences in chemical structure, whereby weaker C–H bond sites are more readily susceptible to radical attack than in 2‐MTHF. It is observed that ignition delay times of 2‐MTHF decrease with increasing equivalence ratio at 12 atm for fixed argon/oxygen ratio. Ignition delay times are compared with model predictions using recent chemical kinetic models of both fuels, showing that both models generally predict shorter ignition delay times than measured. The relatively higher absorption cross section of 2‐MTHF at 3.39 µm allows for its concentration time histories to be determined and compared to model predictions. In line with the observed discrepancy in ignition predictions, predicted 2‐MTHF concentration profiles are such that the fuel is shown to be more rapidly consumed than observed in the experiments. The study advances understanding of the combustion chemistry of these cyclic ethers that are potential alternative fuels.     

Motion and shape control of soft robots and materials

Nonlinear Dynamics - A continuum-based approach for simultaneously controlling the motion and shape of soft robots and materials (SRM) is proposed. This approach allows for systematically computing...