Oxysulfide Sm(2)Ti(2)S(2)O(5) as a stable photocatalyst for water oxidation and reduction under visible light irradiation (lambda < or = 650 nm)

A Ti-based oxysulfide, Sm(2)Ti(2)S(2)O(5), was studied as a visible light-driven photocatalyst. Under visible light (440 nm < or = lambda < or = 650 nm) irradiation, Sm(2)Ti(2)S(2)O(5) with a band gap of approximately 2 eV evolved H(2) or O(2) from aqueous solutions containing a sacrificial electron donor (Na(2)S-Na(2)SO(3) or methanol) or acceptor (Ag(+)) without any noticeable degradation. This oxysulfide is, therefore, a stable photocatalyst with strong reduction and oxidation abilities under visible-light irradiation. The electronic band structure of Sm(2)Ti(2)S(2)O(5) was calculated using the plane-wave-based density functional theory (DFT) program. It was elucidated that the S3p orbitals constitute the upper part of the valence band and these orbitals make an essential contribution to the small band gap energy. The conduction and valence bands' positions of Sm(2)Ti(2)S(2)O(5) were also determined by electrochemical measurements. It indicated that conduction and valence bands were found to have satisfactory potentials for the reduction of H(+) to H(2) and the oxidation of H(2)O to O(2) at pH = 8. This is consistent with the results of the photocatalytic reactions.     

Helicity‐Encoded Molecular Strands: Efficient Access by the Hydrazone Route and Structural Features

Control over the folding of molecular strands may be achieved by appropriate choice of the constituting subunits, in particular for chains of specific heterocycles such as sequences of directly connected pyridine (py) and pyrimidine (pym) rings, which are known to fold into extended helical structures. Since the hydrazone (hyz) group represents an isomorphic analogue of a py site, the condensation of hydrazine and carboxaldehyde derivatives of pym offers a very efficient approach to strands incorporating hyz instead of py units and constituted by sequences of alternating hyz and pym groups. A series of such strands of different lengths, up to ten hyz units, i.e., 1 – 7 , were synthesized. Their spectral properties indicate that they fold indeed into helical shapes. Extensive characterization was performed in solution by ¹HNMR spectroscopy and in the solid state by determination of the crystal structures of eight such strands. They all display the expected helical geometry with up to 3 ¹/₃ turns and direct stacking contacts. The efficiency and flexibility of the synthetic approach as well as its wide potential for generation of diversity through lateral decoration make the (hyz? pym) subunit a particularly attractive helicity codon.     

Solvolysen von 4-Alkylidenbicyclo[3.2.0]hept-2-en-6-olen. Synthese von 1-Vinylfulvenen und 8,8-Diphenylheptafulven

Solvolysis of 4-Alkydenbicyclo[3.2.0]hept-2-en-6-oles. Synthesis of 1-Vinylfulvenes and 8,8-Diphenylheptafulvene Four 4-alkylidenebicyclo[3.2.0]hept-2-en-6-ones 2–5 , obtained via ketene cycloaddition to fulvenes, were reduced to separated mixtures of the ‘endo’ -alcohols ‘endo’- 6 to ‘endo’- 9 (68–73%) and ‘exo’- 6 to ‘exo’- 9 (3–20%). Treatment of some of these alcohols with (CF₃SO₂)₂O in CH₂Cl₂/pyridine caused a spontaneous solvolysis to yield unsaturated 7-membered rings as pyridinium triflates 10–12 or 1-vinylfulvenes 13 and 14 , a new class of reactive tetraenes: Both ‘endo’- 9 and ‘exo’- 9 , having two methyl groups at C(7), were converted into the vinylfulvene 13 (≈ 80%). The alcohols with two H-atoms at C(7) exhibited a stereochemically controlled reaction selectivity, inasmuch as ‘endo’- 6 to ‘endo’- 8 afforded only the corresponding 7-membered-ring pyridinium salts 10–12 (66–79%), while ‘exo’- 6 produced only the vinylfulvene 14 (77%). A stereoelectronic control argument explains the C(1), C(5)-bond cleavage with ‘endo’- B and ‘endo’– 6 -‘endo’- 8 , as well as the C(1), C(7)-bond cleavage with ‘exo’- B , ‘exo’- 6 , and with both ‘endo’- and ‘exo’- 9 . Thermolysis (120°) of the pyridinium triflates 10 and 11 yielded the 3-isopropenyl-cycloheptatrienes 18 and 19 , respectively (≈90%); similar conditions (145°) applied to the triflate 12 produced the doubly cyclized fluorene derivative 21 (60%). When the iodide 22 derived from the triflate 12 with Nal was heated in refluxing toluene, 8,8-diphenylheptafulvene ( 23 , 86%) was obtained.     

Determination of chlormequat and mepiquat in pear,tomato, and wheat flour using on-line solid-phase extraction (Prospekt) coupled with liquid chromatography-electrospray ionization tandem mass spectrometry

A new methodology based on pressurized liquid extraction (PLE) followed by LC-MS is presented for the simultaneous and unequivocal determination of alkylphenol ethoxylates (APEOs) and their degradation products, alkylphenols (APs) and alkylphenoxy carboxylates (APECs), in sediment samples. The protocol, applicable to a full range of APEO oligomers and degradation products, permits the sensitive and selective determination of APEOs (nEO = 1-15), APECs (nEO = 0-1) and APs at low ppb levels (LODs = 1-5 microg/kg) in sediment samples. Optimization of the operational parameters of PLE clearly demonstrates that significant thermal losses of APs occur during extraction at elevated temperatures. The loss of octylphenol (OP) at 100 degrees C was 61.2% and of nonylphenol (NP) 40.0%, whereas other compounds were completely recovered. Thus, to avoid losses due to the volatility of alkylphenols, a low extraction temperature should be applied. The conditions that gave the best results for all target compounds were as follows: extraction solvent mixture, methanol-acetone (1:1, v/v); temperature, 50 degrees C; pressure, 1500 p.s.i.; two static cycles. Using PLE and a subsequent clean-up with solid-phase extraction (SPE), the simultaneous extraction of APEOs, APs and APECs from sediment samples was achieved yielding recoveries >70% and producing low MS background noise. The developed methodology was applied on a routine basis to the analysis of alkylphenolic compounds in sediment samples. APEOs and their persistent degradation products were detected in significant concentrations in sediments from Portuguese rivers, especially at sites situated in the proximity of industrial plants (mainly the textile industry). The total concentration of alkylphenolic compounds (APEOs+APs+APECs) ranged from 155 to 2400 microg/kg. Of all the alkylphenolic compounds, NP comprised 40 to 50% with concentrations up to 1172 microg/kg.     

Pinensins: The First Antifungal Lantibiotics

Lantibiotics (lanthionine‐containing antibiotics) from Gram‐positive bacteria typically exhibit activity against Gram‐positive bacteria. The activity and structure of pinensin A ( 1 ) and B ( 2 ), lantibiotics isolated from a native Gram‐negative producer Chitinophaga pinensis are described. Surprisingly, the pinensins were found to be highly active against many filamentous fungi and yeasts but show only weak antibacterial activity. To the best of our knowledge, lantibiotic fungicides have not been described before. An in‐depth bioinformatic analysis of the biosynthetic gene cluster established the ribosomal origin of these compounds and identified candidate genes encoding all of the enzymes required for post‐translational modification. Additional encoded functions enabled us to build up a hypothesis for the biosynthesis, export, sensing, and import of this intriguing lantibiotic.