Microwave synthesis,characterization and catalytic properties of titanium-incorporated ZSM-5 zeolite

Titanium-incorporated ZSM-5 zeolites (Si/Al = 50–200 and Si/Ti = 70) were successfully synthesized in a one-step sol-gel process under microwave irradiation. The characteristics of Ti-ZSM-5 zeolites were investigated using X-ray power diffraction, UV/Vis-DRS, FT-IR spectroscopy and solid-state ²⁷Al-NMR to monitor the physico-chemical properties. Simultaneously, the acidic properties were characterized by the NH₃-TPD profile. The characterization results revealed that the Ti⁴⁺ and Al³⁺ ions were well incorporated into the framework of Ti-ZSM-5 zeolite. The prepared zeolite was moderately active but selective in the dehydration of methanol to dimethyl ether.     

Onset of Buoyancy-Driven Convection in Porous Media Saturated with Cold Water Cooled from Above

When porous media saturated with initially stagnant cold water around the density maximum temperature are cooled from above, convection may be induced in an unstable lower layer. In this study, the onset of buoyancy-driven convection during time-dependent cooling is investigated using the propagation theory, which transforms disturbance equations similarly, and also considering the density inversion effect. The critical Darcy–Rayleigh number Ra _D,c is found as a function of the dimensionless density maximum temperature θ _max. For Ra _D > Ra _D,c the dimensionless critical time τ _c to mark the onset of instability is presented as a function of Ra _D and θ _max. These critical conditions are compared with previous theoretical results.     

The onset of Görtler vortices in laminar boundary layer flow over a slightly concave wall

The onset of convective instability in the laminar boundary layer over the slightly curved wall is analyzed theoretically and compared with the existing experimental data. A new set of stability equations are derived by the propagation theory considering the relative instability under the linear stability theory. In this analysis the disturbances are assumed to have the form of longitudinal vortices and also to grow themselves in streamwise direction. The critical position to mark the onset of Görtler instability is obtained as a function of the Görtler number, where disturbances at the critical state are mainly confined to the hydrodynamic boundary layer. Comparing the theoretical predictions with available experimental and other theoretical results, the present predictions follow experimental trends fairly well with slightly higher critical Görtler numbers than those from the local stability theory. The propagation theory commanding the local eigenvalue analysis is successful to obtain stability conditions reasonably in Görtler vortex problems, relaxing the limitations by the conventional analyses.     

Molecular Encapsulation of Trimeric Chromium Carboxylate Clusters in Metal–Organic Frameworks and Propylene Sorption

Oxo-bridged trimeric chromium acetate clusters [Cr₃O(OOCCH₃)₆(H₂O)₃]NO₃ have been encapsulated for the first time in the mesoporous cages of the chromium terephthalate MIL-101(Cr). The isolated clusters in MIL-101(Cr) have increased affinity towards propylene compared to propane, due to generation of a new kind of pocket-based propylene-binding site, as supported by DFT calculations.     

An Overview on the Dehydrogenation of Alkylbenzenes with Carbon Dioxide over Supported Vanadium–Antimony Oxide Catalysts

Utilization of carbon dioxide as a soft oxidant for the catalytic dehydrogenation of ethylbenzene (CO₂-EBDH) has been recently attempted to explore a new technology for producing styrene selectively. This article summarizes the results of our recent attempts to develop effective catalyst systems for the CO₂-EBDH on the basis of alumina-supported vanadium oxide catalysts. Its initial activity and on-stream stability were essentially improved by the introduction of antimony oxide as a promoter into the alumina-supported catalyst. Insertion of zirconium oxide into alumina support substantially increased the catalytic activity. Modification of alumina with magnesium oxide yielded an increase of catalyst stability of alumina-supported V–Sb oxide due to the coking suppression. Carbon dioxide has been confirmed to play a beneficial role of selective oxidant in improving the catalytic performance through the oxidative pathway, avoiding excessive reduction and maintaining desirable oxidation state of vanadium ion (V⁵⁺). The positive effect of carbon dioxide in dehydrogenation reactions of several alkylbenzenes such as 4-diethylbenzene, 4-ethyltoluene, and iso- and n-propylbenzenes was also observed. Along with the easier redox cycle between fully oxidized and partially reduced vanadium species, the optimal surface acidity of the catalyst is also responsible for achieving high activity and catalyst stability. It is highlighted that supra-equilibrium EBDH conversions were obtained over alumina-supported V–Sb oxide catalyst in CO₂-EBDH as compared with those in steam-EBDH in the absence of carbon dioxide.     

Monodispersed platinum nanocubes for enhanced electrocatalytic properties in alcohol electrooxidation

We report Pt nanocubes of ～4.5 nm in size synthesized by thermal decomposition in the presence of PVP. The Pt cubic electrocatalysts with dominantly exposed {100} facets show much improved electrocatalytic activities in methanol, ethanol and formic acid electrooxidation.     

Enzymatic Polymerization of Natural Anacardic Acid and Antibiofouling Effects of Polyanacardic Acid Coatings

Anacardic acid, separated from cashew nut shell liquid, is well known for its strong antibiotic and antioxidant activities. Recent findings indicate that phenolic compounds from plant sources have an effect on Gram-negative bacteria biofilm formation. In this work, a polyphenolic coating was prepared from anacardic acid using enzymatic synthesis and tested for its effects on biofilm formation of both Gram-negative and Gram-positive bacteria. Natural anacardic acid was enzymatically polymerized using soybean peroxidase. Hydrogen peroxide and phenothiazine-10-propionic acid were used as an oxidizing agent and redox mediator, respectively. Nuclear magnetic resonance and Fourier transform infrared (FTIR) analyses showed the formation of oxyphenylene and phenylene units through the phenol rings. No linkage through the alkyl chain was observed, which proved a high chemo-selectivity of the enzyme. Aqueous solvents turned out to play an important role in the polymer production yield and molecular weight. With 2-propanol, the highest production yield (61%) of polymer (molecular weight = 3,900) was observed, and with methanol, higher-molecular-weight polymers (5,000) were produced with lower production yields (43%). The resulting polyanacardic acid was cross-linked on a solid surface to form a permanent natural polymer coating. The FTIR analysis indicates that the cross-linking between the polymers took place through the unsaturated alkyl side chains. The polyanacardic acid coating was then tested for its antibiofouling effect against Gram-negative and Gram-positive bacteria and compared with the antibiofouling effects of polycardanol coatings reported in the literature. The polyanacardic acid coating showed more reduction in biofilm formation on its surface than polycardanol coatings in the case of Gram-positive bacteria, while in the case of Gram-negative bacteria, it showed a similar reduction in biofilm formation as polycardanol.