Low-threshold interband cascade lasers operating above room temperature

Mid-IR type-II interband cascade lasers were demonstrated in pulsed mode at temperatures up to 325 K and in continuous mode up to 200 K. At 80 K, the threshold current density was 8.9 A/cm² and a continuous wave output power of 140 mW/facet was obtained.     

Pulsed-Field-Gradient Measurements of Time-Dependent Gas Diffusion

Pulsed-field-gradient NMR techniques are demonstrated for measurements of time-dependent gas diffusion. The standard PGSE technique and variants, applied to a free gas mixture of thermally polarized xenon and O₂, are found to provide a reproducible measure of the xenon diffusion coefficient (5.71 × 10⁻⁶m²s⁻¹for 1 atm of pure xenon), in excellent agreement with previous, non-NMR measurements. The utility of pulsed-field-gradient NMR techniques is demonstrated by the first measurement of time-dependent (i.e., restricted) gas diffusion inside a porous medium (a random pack of glass beads), with results that agree well with theory. Two modified NMR pulse sequences derived from the PGSE technique (named the Pulsed Gradient Echo, or PGE, and the Pulsed Gradient Multiple Spin Echo, or PGMSE) are also applied to measurements of time dependent diffusion of laser polarized xenon gas, with results in good agreement with previous measurements on thermally polarized gas. The PGMSE technique is found to be superior to the PGE method, and to standard PGSE techniques and variants, for efficiently measuring laser polarized noble gas diffusion over a wide range of diffusion times.     

Tetra(μ3-hydroxo)hexa(μ2-carboxylato-O,O′)-bridged tetranuclear terbium(III) cubane complex

A novel tetranuclear terbium(III) complex [Tb₄(OH)₄(pybet)₆(H₂O)₈][Tb₄(OH)₄(pybet)₆(H₂O)₇ (NO₃)](ClO₄)₁₄·6H₂O has been synthesized and shown by X-ray crystallography to have a cubane-like Tb₄(μ₃-OH)₄(μ₂-carboxylato-O,O′)₆ core. The ligand pybet is pyridinoacetate, C₅H₅⁺N-CH₂CO₂⁻. Magnetic susceptibility data were measured for this Tb₄ complex in the range of 2.0–320 K and in fields of 1.0 G to 50.0 kG. It is concluded that either there is very weak antiferromagnetic exchange interaction (J = −0.015 cm⁻¹) or there is a small crystal-field splitting of the ⁷F₆ Tb^III ground state.     

Continuous pH monitoring during pretreatment of yellow poplar wood sawdust by pressure cooking in water

Yellow poplar wood sawdust consists of 41% cellulose and 19% hemicellulose. The goal of pressure cooking this material in water is to hydrate the more chemically resistive regions of cellulose in order to enhance enzymatic conversion to glucose. Pretreatment can generate organic acids through acid-catalyzed degradation of monosaccharides formed because of acids released from the biomass material or the inherent acidity of the water at temperatures above 160°C. The resulting acids will further promote the acid-catalyzed degradation of monomers that cause both a reduction in the yield and the formation of fermentation inhibitors such as hydroxymethyl furfural and furfural. A continuous pH-monitoring system was developed to help characterize the trends in pH during pretreatment and to assist in the development of a base (2.0 M KOH) addition profile to help keep the pH within a specified range in order to reduce any catalytic degradation and the formation of any monosac-charide degradation products during pretreatment. The results of this work are discussed.     

Diffusion NMR methods applied to xenon gas for materials study

We report initial NMR studies of (i) xenon gas diffusion in model heterogeneous porous media and (ii) continuous flow laser-polarized xenon gas. Both areas utilize the pulsed gradient spin-echo (PGSE) techniques in the gas phase, with the aim of obtaining more sophisticated information than just translational self-diffusion coefficients--a brief overview of this area is provided in the Introduction. The heterogeneous or multiple-length scale model porous media consisted of random packs of mixed glass beads of two different sizes. We focus on observing the approach of the time-dependent gas diffusion coefficient, D(t) (an indicator of mean squared displacement), to the long-time asymptote, with the aim of understanding the long-length scale structural information that may be derived from a heterogeneous porous system. We find that D(t) of imbibed xenon gas at short diffusion times is similar for the mixed bead pack and a pack of the smaller sized beads alone, hence reflecting the pore surface area to volume ratio of the smaller bead sample. The approach of D(t) to the long-time limit follows that of a pack of the larger sized beads alone, although the limiting D(t) for the mixed bead pack is lower, reflecting the lower porosity of the sample compared to that of a pack of mono-sized glass beads. The Pade approximation is used to interpolate D(t) data between the short- and long-time limits. Initial studies of continuous flow laser-polarized xenon gas demonstrate velocity-sensitive imaging of much higher flows than can generally be obtained with liquids (20-200 mm s-1). Gas velocity imaging is, however, found to be limited to a resolution of about 1 mm s-1 owing to the high diffusivity of gases compared with liquids. We also present the first gas-phase NMR scattering, or diffusive-diffraction, data, namely flow-enhanced structural features in the echo attenuation data from laser-polarized xenon flowing through a 2 mm glass bead pack.     

Synthesis and Characterization of a [Mn12O12(O2CR)16(H2O)4] Complex Bearing Paramagnetic Carboxylate Ligands. Use of a Modified Acid Replacement Synthetic Approach

Summary.  A new modified approach for the synthesis of Mn₁₂ clusters, based on the use of complex [Mn₁₂O₁₂(O₂C ^t Bu)₁₆(H₂O)₄] (2) as starting material to promote the acidic ligand replacement, is presented here. This new synthetic approach allowed us to obtain complex [Mn₁₂O₁₂(O₂CC₆H₄N(O^•) ^t Bu)₁₆(H₂O)₄] (3), whose preparation remained elusive by direct replacement of the acetate groups of Mn₁₂Ac (1). Complex 3 bearing open-shell radical units, was prepared to increase the total spin number of its ground state, and consequently, to increase T _B , with the expectation that the radical ligands may couple ferromagnetically with the Mn₁₂ core. Unfortunately, magnetic measurements of complex 3 revealed that the sixteen radical carboxylate ligands interact antiferromagnetically with the Mn₁₂ core to yield a S = 2 magnetic ground state. Corresponding author. E-mail: vecianaj@icmab.es Received March 27, 2002; accepted May 2, 2002     

Determination of malachite green and leucomalachite green in a variety of aquacultured products by liquid chromatography with tandem mass spectrometry detection

A liquid chromatography/tandem mass spectrometry (LC/MS/MS) method was developed for determining the residues of malachite green (MG) and leucomalachite green (LMG) in a number of aquatic species. MG and its metabolite were extracted from homogenized tissues with a perchloric acid-acetonitrile solution; the extract was centrifuged; and an aliquot was taken, concentrated, and passed through a chemically bonded octadecyl C18 solid-phase extraction column. The compounds of interest were eluted with acetonitrile, and the eluate was evaporated to dryness. The residue was dissolved in acetonitrile and diluted with water in preparation for analysis by LC/MS/MS. MG and its metabolite were determined by reversed-phase LC using a Luna C18 column with an ammonium hydroxide-formic acid buffer in acetonitrile gradient and MS/MS detection using multiple reaction monitoring. Calibration curves were linear for all analyses between 5 and 500 pg injected for both analytes, with recoveries ranging from 81% for LMG to 98% for MG in salmon spiked at the 1 ng/g level. Detection limits of 0.1 ng/g for both MG and LMG were easily obtainable using the recommended method. The operational errors, interferences, and recoveries for spiked samples compared favorably with those obtained by established methodology. The recommended method is simple, rapid, and specific for monitoring residues of MG and LMG in a number of aquatic species.     

Tetranuclear and Octanuclear Manganese Carboxylate Clusters: Preparation and Reactivity of (NBu(n)(4))[Mn(4)O(2)(O(2)CPh)(9)(H(2)O)] and Synthesis of (NBu(n)(4))(2)[Mn(8)O(4)(O(2)CPh)(12)(Et(2)mal)(2)(H(2)O)(2)] with a "Linked-Butterfly" Structure

The reaction of Mn(O(2)CPh)(2).2H(2)O and PhCO(2)H in EtOH/MeCN with NBu(n)(4)MnO(4) gives (NBu(n)(4))[Mn(4)O(2)(O(2)CPh)(9)(H(2)O)] (4) in high yield (85-95%). Complex 4 crystallizes in monoclinic space group P2(1)/c with the following unit cell parameters at -129 degrees C: a = 17.394(3) ?, b = 19.040(3) ?, c = 25.660(5) ?, beta = 103.51(1) degrees, V = 8262.7 ?(3), Z = 4; the structure was refined on F to R (R(w)) = 9.11% (9.26%) using 4590 unique reflections with F > 2.33sigma(F). The anion of 4 consists of a [Mn(4)(&mgr;(3)-O)(2)](8+) core with a "butterfly" disposition of four Mn(III) atoms. In addition to seven bridging PhCO(2)(-) groups, there is a chelating PhCO(2)(-) group at one "wingtip" Mn atom and terminal PhCO(2)(-) and H(2)O groups at the other. Complex 4 is an excellent steppingstone to other [Mn(4)O(2)]-containing species. Treatment of 4 with 2,2-diethylmalonate (2 equiv) leads to isolation of (NBu(n)(4))(2)[Mn(8)O(4)(O(2)CPh)(12)(Et(2)mal)(2)(H(2)O)(2)] (5) in 45% yield after recrystallization. Complex 5 is mixed-valent (2Mn(II),6Mn(III)) and contains an [Mn(8)O(4)](14+) core that consists of two [Mn(4)O(2)](7+) (Mn(II),3Mn(III)) butterfly units linked together by one of the &mgr;(3)-O(2)(-) ions in each unit bridging to one of the body Mn atoms in the other unit, and thus converting to &mgr;(4)-O(2)(-) modes. The Mn(II) ions are in wingtip positions. The Et(2)mal(2)(-) groups each bridge two wingtip Mn atoms from different butterfly units, providing additional linkage between the halves of the molecule. Complex 5.4CH(2)Cl(2) crystallizes in monoclinic space group P2(1)/c with the following unit cell parameters at -165 degrees C: a = 16.247(5) ?, b = 27.190(8) ?, c = 17.715(5) ?, beta = 113.95(1) degrees, V = 7152.0 ?(3), Z = 4; the structure was refined on F to R (R(w)) = 8.36 (8.61%) using 4133 unique reflections with F > 3sigma(F). The reaction of 4 with 2 equiv of bpy or picolinic acid (picH) yields the known complex Mn(4)O(2)(O(2)CPh)(7)(bpy)(2) (2), containing Mn(II),3Mn(III), or (NBu(n)(4))[Mn(4)O(2)(O(2)CPh)(7)(pic)(2)] (6), containing 4Mn(III). Treatment of 4 with dibenzoylmethane (dbmH, 2 equiv) gives the mono-chelate product (NBu(n)(4))[Mn(4)O(2)(O(2)CPh)(8)(dbm)] (7); ligation of a second chelate group requires treatment of 7 with Na(dbm), which yields (NBu(n)(4))[Mn(4)O(2)(O(2)CPh)(7)(dbm)(2)] (8). Complexes 7 and 8 both contain a [Mn(4)O(2)](8+) (4Mn(III)) butterfly unit. Complex 7 contains chelating dbm(-) and chelating PhCO(2)(-) at the two wingtip positions, whereas 8 contains two chelating dbm(-) groups at these positions, as in 2 and 6. Complex 7.2CH(2)Cl(2) crystallizes in monoclinic space group P2(1) with the following unit cell parameters at -170 degrees C: a = 18.169(3) ?, b = 19.678(4) ?, c = 25.036(4) ?, beta = 101.49(1) degrees, V = 8771.7 ?(3), Z = 4; the structure was refined on F to R (R(w)) = 7.36% (7.59%) using 10 782 unique reflections with F > 3sigma(F). Variable-temperature magnetic susceptibility studies have been carried out on powdered samples of complexes 2 and 5 in a 10.0 kG field in the 5.0-320.0 K range. The effective magnetic moment (&mgr;(eff)) for 2 gradually decreases from 8.61 &mgr;(B) per molecule at 320.0 K to 5.71 &mgr;(B) at 13.0 K and then increases slightly to 5.91 &mgr;(B) at 5.0 K. For 5, &mgr;(eff) gradually decreases from 10.54 &mgr;(B) per molecule at 320.0 K to 8.42 &mgr;(B) at 40.0 K, followed by a more rapid decrease to 6.02 &mgr;(B) at 5.0 K. On the basis of the crystal structure of 5 showing the single Mn(II) ion in each [Mn(4)O(2)](7+) subcore to be at a wingtip position, the Mn(II) ion in 2 was concluded to be at a wingtip position also. Employing the reasonable approximation that J(w)(b)(Mn(II)/Mn(III)) = J(w)(b)(Mn(III)/M(III)), where J(w)(b) is the magnetic exchange interaction between wingtip (w) and body (b) Mn ions of the indicated oxidation state, a theoretical chi(M) vs T expression was derived and used to fit the experimental molar magnetic susceptibility (chi(M)) vs T data. The obtained fitting parameters were J(w)(b) = -3.9 cm(-)(1), J(b)(b) = -9.2 cm(-)(1), and g = 1.80. These values suggest a S(T) = (5)/(2) ground state spin for 2, which was confirmed by magnetization vs field measurements in the 0.5-50.0 kG magnetic field range and 2.0-30.0 K temperature range. For complex 5, since the two bonds connecting the two [Mn(4)O(2)](7+) units are Jahn-Teller elongated and weak, it was assumed that complex 5 could be treated, to a first approximation, as consisting of weakly-interacting halves; the magnetic susceptibility data for 5 at temperatures >/=40 K were therefore fit to the same theoretical expression as used for 2, and the fitting parameters were J(w)(b) = -14.0 cm(-)(1) and J(b)(b) = -30.5 cm(-)(1), with g = 1.93 (held constant). These values suggest an S(T) = (5)/(2) ground state spin for each [Mn(4)O(2)](7+) unit of 5, as found for 2. The interactions between the subunits are difficult to incorporate into this model, and the true ground state spin value of the entire Mn(8) anion was therefore determined by magnetization vs field studies, which showed the ground state of 5 to be S(T) = 3. The results of the studies on 2 and 5 are considered with respect to spin frustration effects within the [Mn(4)O(2)](7+) units. Complexes 2 and 5 are EPR-active and -silent, respectively, consistent with their S(T) = (5)/(2) and S(T) = 3 ground states, respectively.     

Heterogeneous or homogeneous catalysis? Mechanistic studies of the rhodium-catalyzed dehydrocoupling of amine-borane and phosphine-borane adducts

In depth, comparative studies on the catalytic dehydrocoupling of the amine-borane adduct Me(2)NH.BH(3) (to form [Me(2)N-BH(2)](2)) and the phosphine-borane adduct Ph(2)PH.BH(3) (to form Ph(2)PH-BH(2)-PPh(2)-BH(3)) with a variety of Rh (pre)catalysts such as [[Rh(1,5-cod)(micro-Cl)](2)], Rh/Al(2)O(3), Rh(colloid)/[Oct(4)N]Cl, and [Rh(1,5-cod)(2)]OTf have been performed in order to determine whether the dehydrocoupling proceeds by a homogeneous or heterogeneous mechanism. The results obtained suggest that the catalytic dehydrocoupling of Me(2)NH.BH(3) is heterogeneous in nature involving Rh(0) colloids, while that of Ph(2)PH.BH(3) proceeds by a homogeneous mechanism even when starting with Rh(0) precursors such as Rh/Al(2)O(3). The catalytic dehydrocoupling reactions are thought to proceed by different mechanisms due to a combination of factors such as (i) the greater reducing strength of amine-borane adducts, (ii) the increased ease of dissociation of phosphine-borane adducts, and (iii) phosphine ligation and/or poisoning of active catalytic sites on metal colloids.