The effect of pyridinecarboxylate chelating groups on the stability and electronic relaxation of gadolinium complexes

The ligand N,N'-bis[(6-carboxy-2-pyridylmethyl]ethylenediamine-N,N'-diacetic acid (H(4)bpeda) was synthesised using an improved procedure which requires a reduced number of steps and leads to a higher yield with respect to the published procedure. It was obtained in three steps from diethylpyridine-2,6-dicarboxylate and commercially available ethylenediamine-N,N[prime or minute]-diacetic acid with a total yield of approximately 20%. The crystal structure of the hexa-protonated form of the ligand which was determined by X-ray diffraction shows that the four carboxylates and the two amines are protonated. The crystal structure of the polynuclear complex [Gd(bpeda)(H(2)O)(2)](3)[Gd(H(2)O)(6)](2)Cl(3)(2), isolated by slow evaporation of a 1:1 mixture of GdCl(3) and H(4)bpeda at pH approximately 1, was determined by X-ray diffraction. In complex three [Gd(bpeda)(H(2)O)(2)] units, containing a Gd(III) ion ten-coordinated by the octadentate bpeda and two water molecules, are connected in a pentametallic structure by two hexa-aquo Gd(3+) cations through four carboxylato bridges. The protonation constants (pK(a1)= 2.9(1), pK(a2)= 3.5(1), pK(a3)= 5.2(2), and pK(a4)= 8.5(1)) and the stability constants of the complexes formed between Gd(III) and Ca(II) ions and H(4)bpeda (log beta(GdL)= 15.1(3); log beta(CaL)= 9.4(1)) were determined by potentiometric titration. The unexpected decrease in the stability of the gadolinium complex and of the calcium complex of the octadentate ligand bpeda(4-) with respect to the hexadentate ligand edta(4-) has been interpreted in terms of an overall lower contribution to stability of the metal-nitrogen interactions. The EPR spectra display very broad lines (apparent DeltaH(pp) approximately 800-1200 G at X-band and 90-110 G at Q-band depending on the temperature), indicating a rapid transverse electron spin relaxation. At X-band, Gd(bpeda) is among the fastest relaxing Gd(3+) complexes to date suggesting that the presence of pyridinecarboxylate chelating groups in itself does not lead to slow electron relaxation.     

Dynamic and wear characteristics of self-lubricating bearing cage: effects of cage pocket shape

34,354,966 active cases and 460,787 deaths because of COVID-19 pandemic were recorded on November 06, 2021, in India. To end this ongoing global COVID-19 pandemic, there is an urgent need to implement multiple population-wide policies like social distancing, testing more people and contact tracing. To predict the course of the pandemic and come up with a strategy to control it effectively, a compartmental model has been established. The following six stages of infection are taken into consideration: susceptible (S), asymptomatic infected (A), clinically ill or symptomatic infected (I), quarantine (Q), isolation (J) and recovered (R), collectively termed as SAIQJR. The qualitative behavior of the model and the stability of biologically realistic equilibrium points are investigated in terms of the basic reproduction number. We performed sensitivity analysis with respect to the basic reproduction number and obtained that the disease transmission rate has an impact in mitigating the spread of diseases. Moreover, considering the non-pharmaceutical and pharmaceutical intervention strategies as control functions, an optimal control problem is implemented to mitigate the disease fatality. To reduce the infected individuals and to minimize the cost of the controls, an objective functional has been constructed and solved with the aid of Pontryagin’s maximum principle. The implementation of optimal control strategy at the start of a pandemic tends to decrease the intensity of epidemic peaks, spreading the maximal impact of an epidemic over an extended time period. Extensive numerical simulations show that the implementation of intervention strategy has an impact in controlling the transmission dynamics of COVID-19 epidemic. Further, our numerical solutions exhibit that the combination of three controls are more influential when compared with the combination of two controls as well as single control. Therefore, the implementation of all the three control strategies may help to mitigate novel coronavirus disease transmission at this present epidemic scenario.

     

Synthetic Studies on Selectin Ligands/Inhibitors: One-Pot Synthesis of the Mono- and Oligo-Sulfated 2-(Tetradecyl)Hexadecyl β-D-Galacto- and Lactopyranosides as the Sulfatide Mimetics 1

Abstract

The ¹³C NMR spectra of inulin oligomers in D₂O with degree of polymerization (DP) of 3 through 9, along with two other inulin oligomer mixtures of average DP = 17 and DP = 31 were recorded. Significant variations in the chemical shift of some fructofuranose carbon signals indicates that unlike glucans, simple helical structures are not the predominant conformation for inulin oligomers—at least up to DP = 9. Models of the DP = 5 oligomer show that it should prefer a single helical conformation which however, would not be accessible to longer DP oligomers due to severe steric interactions.     

Elucidation of the bonding in Mn(eta2-SiH) complexes by charge density analysis and T1 NMR measurements: asymmetric oxidative addition and anomeric effects at silicon

The bonding in Mn(eta2-SiH) complexes is interpreted in terms of an asymmetric oxidative addition whose extent is controlled by the substitution pattern at the hypercoordinate silicon centre, and especially by the ligand trans to the eta2-coordinating SiH moiety.     

Thymine‐functionalized polystyrenes for applications in biotechnology. III. Increasing the thymine loading via a new synthetic pathway

In this article, we report an efficient method for the synthesis of thymine‐functionalized polystyrene microspheres. First, poly(styrene‐co‐4‐chloromethylstyrene) copolymers slightly crosslinked with divinylbenzene were synthesized in batch free‐radical emulsion copolymerization. Microspheres with a particle size of ～40–70 nm were obtained with greater than 99% conversion. The chloromethylstyrene (CMS) groups were then converted into thymylmethylstyrene (TMS) in a two‐phase system with greater than 80% efficiency, and up to a 45 mol % thymine loading was achieved. The functionalized microspheres were characterized by elemental analysis, Fourier transform infrared, and X‐ray photoelectron spectroscopy. The analyses revealed partial hydrolysis of the CMS functionalities, yielding hydroxymethyl functional groups in addition to the thymine functionalities. These copolymers have potential applications in biotechnology. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5545–5553, 2005     

Relating structural and thermodynamic effects of the Pb(II) lone pair: a new picolinate ligand designed to accommodate the Pb(II) lone pair leads to high stability and selectivity

The crystal and molecular structure and the stability of lead and calcium complexes of two chelates containing picolinate chelating groups in different geometries have been investigated in order to relate the ligand affinity and selectivity for lead over calcium with the ability of the ligand to accommodate a stereochemically active lone pair. The crystal structures of the lead complexes of the diprotonated and monoprotonated tripodal ligand tpaa2- show that the three picolinate arms of the tripodal ligand coordinate the lead in an asymmetric way leaving a gap in the coordination sphere to accommodate the lead lone pair. As a consequence of this binding mode, one picolinate arm is very weakly bound and therefore can be expected to contribute very little to the complex stability. Conversely, the geometry of the dipodal ligand H2dpaea is designed to accommodate the lead lone pair; in the structure of the [Pb(dpaea)] complex the donor atoms of the ligand occupy only a quarter of the coordination sphere, reducing the sterical interaction between the lead lone pair with respect to the H3tpaa complexes. As a result, in the lead structures of H2dpaea all the ligand donor atoms are strongly bound to the metal ion leading to increased stability. The high value of the formation constant measured for the lead complex of the dipodal dpaea2- (log beta11(Pb)=12.1(3)) compared to the lower value found for the one of the tripodal tpaa3- (log beta11(Pb)=10.0(1)) provides direct evidence of the influence of the stereochemically active lead lone pair on complex stability. As a result, since the ligand geometry has little effect on the stability of the calcium complex, a remarkable increase in the Pb/Ca selectivity is observed for dpaea-(10(6.6)) compared to tpaa3- (10(1.5)), making the dipodal ligand a good candidate for application as extracting agent for the lead removal from contaminated water.     

Identifying i-motif formation using capillary electrophoresis

Over the past few years, intercalated motifs (i-motifs) have attracted attention due to the direct visualization of their existence in the nuclei of human cells. Traditionally, i-motifs have been studied using expensive and complicated NMR, and/or relatively inexpensive but less common circular dichroism spectrometry. The aim of this study was to investigate the feasibility of using less expensive, less complicated, and more widely available CE as an alternative for i-motif related research. The mobilities of two DNA and RNA i-motifs in CE were determined under different pH conditions. Our results demonstrate that CE is able to identify and differentiate mostly folded, partially folded, and mostly unfolded DNA and RNA i-motifs through changes in peak shape and migration time, thus providing a new method to study both i-motif conformation and the interactions between i-motifs and their ligands.     

A chemically unlocked binary molecular switch

A highly luminescent and sensitive terbium complex of a ligand comprising of a phthalimide group appended to a DO3A moiety is an active pH sensor that is conditional on its previous pH.