Evaluation of piezoelectric PVDF polymers for use in space environments. III. Comparison of the effects of vacuum UV and gamma radiation

Films of piezoelectric PVDF and P(VDF‐TrFE) were exposed to vacuum UV (115–300 nm VUV) and γ‐radiation to investigate how these two forms of radiation affect the chemical, morphological, and piezoelectric properties of the polymers. The extent of crosslinking was almost identical in both polymers after γ‐irradiation, but surprisingly, was significantly higher for the TrFE copolymer after VUV‐irradiation. Changes in the melting behavior were also more significant in the TrFE copolymer after VUV‐irradiation due to both surface and bulk crosslinking, compared with only surface crosslinking for the PVDF films. The piezoelectric properties (measured using d₃₃ piezoelectric coefficients and D‐E hysteresis loops) were unchanged in the PVDF homopolymer, while the TrFE copolymer exhibited more narrow D‐E loops after exposure to either γ‐ or VUV‐radiation. The more severe damage to the TrFE copolymer in comparison with the PVDF homopolymer after VUV‐irradiation is explained by different energy deposition characteristics. The short wavelength, highly energetic photons are undoubtedly absorbed in the surface layers of both polymers, and we propose that while the longer wavelength components of the VUV‐radiation are absorbed by the bulk of the TrFE copolymer causing crosslinking, they are transmitted harmlessly in the PVDF homopolymer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3253–3264, 2006     

Initiation of polymer degradation via transfer of infectious species

A novel dual stage chemiluminescence detection system incorporating individually controlled hot stages has been developed and applied to probe for material interaction effects during polymer degradation. Utilization of this system has resulted in experimental confirmation for the first time that in an oxidizing environment a degrading polymer A (in this case polypropylene, PP) is capable of infecting a different polymer B (in this case polybutadiene, HTPB) over a relatively large distance. In the presence of the infectious degrading polymer A, the thermal degradation of polymer B is observed over a significantly shorter time period. Consistent with infectious volatiles from material A initiating the degradation process in material B it was demonstrated that traces (micrograms) of a thermally sensitive peroxide in the vicinity of PP could induce degradation remotely. This observation documents cross-infectious phenomena between different polymers and has major consequences for polymer interactions, understanding fundamental degradation processes and long-term aging effects under combined material exposures.     

Correlation of antioxidant depletion and mechanical performance during thermal degradation of an HTPB elastomer

Thermal degradation studies of a stabilized HTPB based elastomer were conducted at temperatures from 50 °C to 110 °C. The concentration of extractable antioxidant (AO2246) in the polymer was quantified via AO extraction and a gas chromatography-based method using internal standards. The decrease in extractable AO levels as a function of time and temperature was evaluated and correlated with mechanical property changes. Most importantly, AO depletion features were found to be temperature dependent. At elevated temperatures (>80 °C) extractable AO levels decreased rapidly and faster than the concurrent loss in mechanical properties. While extractable AO concentrations decrease quickly, the material is able to maintain some useful mechanical properties, perhaps via non-extractable or grafted AO species formed during degradation providing additional protection. At lower aging temperatures extractable or free AO levels decreased more slowly than the mechanical properties. Therefore, for condition monitoring purposes a universal correlation between AO levels and aging state or material condition could not be established. Most importantly, however, loss of mechanical properties and oxidative degradation is observed at lower temperatures despite significant levels of free antioxidant in the material. The antioxidant appears to be limited in its effectiveness to completely prevent degradation reactions, or only fractions of the total AO available are actually involved in the inhibition process.     

Catalytic asymmetric addition of alkylzinc and functionalized alkylzinc reagents to ketones

We describe our full report of the catalytic asymmetric addition of simple and functionalized dialkylzinc reagents to a broad range of saturated ketones and enones. The functionalized organozinc reagents contain esters, silyl ethers, alkyl chlorides, and alkyl bromides. In general, the resulting tertiary alcohol products are isolated with high ee's. With some substrates, yields are low as a result of the formation of aldol byproducts. Most substrates undergo additions with good yields reaching as high as 91%.     

Calorimetric determination of the standard enthalpy of the first ionization of aqueous sulfur dioxide or ‘sulfurous acid’ at 25°C

Previous investigations of the first ionization of aqueous sulfur dioxide or ‘sulfurous acid’ have led to ΔH ₁ ⁰ values ranging from ?15 to ?24.5 kJ-mol^?1. To help with selection of a ‘best’ value for this enthalpy of ionization we have made calorimetric measurements of enthalpies associated with adding dilute perchloric acid to dilute aqueous sulfur dioxide and sodium bisulfite. Results have led to ΔH ₁ ⁰ =?17.4₀ kJ-mol^?1, which we have combined with K₁=0.0139 and the related ΔG ₁ ⁰ =10.60 kJ-mol^?1 to obtain ΔS ₁ ⁰ =?93.₉ J-K^?1-mol^?1 for the first ionization, all referring to 25°C.     

Reversible pH-Responsive Coacervate Formation in Lipid Vesicles Activates Dormant Enzymatic Reactions

In situ, reversible coacervate formation within lipid vesicles represents a key step in the development of responsive synthetic cellular models. Herein, we exploit the pH responsiveness of a polycation above and below its pK_a, to drive liquid–liquid phase separation, to form single coacervate droplets within lipid vesicles. The process is completely reversible as coacervate droplets can be disassembled by increasing the pH above the pK_a. We further show that pH-triggered coacervation in the presence of low concentrations of enzymes activates dormant enzyme reactions by increasing the local concentration within the coacervate droplets and changing the local environment around the enzyme. In conclusion, this work establishes a tunable, pH responsive, enzymatically active multi-compartment synthetic cell. The system is readily transferred into microfluidics, making it a robust model for addressing general questions in biology, such as the role of phase separation and its effect on enzymatic reactions using a bottom-up synthetic biology approach.     

EPR spectroscopy of protein microcrystals oriented in a liquid crystalline polymer medium

Correlation of the g-tensor of a paramagnetic active center of a protein with its structure provides a unique experimental information on the electronic structure of the metal site. To address this problem, we made solid films containing metalloprotein (Desulfovibrio gigas cytochrome c(3)) microcrystals. The microcrystals in a liquid crystalline polymer medium (water/hydroxypropylcellulose) were partially aligned by a shear flow. A strong orientation effect of the metalloprotein was observed by EPR spectroscopy and polarizing optical microscopy. The EPR spectra of partially oriented samples were simulated, allowing for molecular orientation distribution function determination. The observed effect results in enhanced sensitivity and resolution of the EPR spectra and provides a new approach towards the correlation of spectroscopic data, obtained by EPR or some other technique, with the three-dimensional structure of a protein or a model compound.     

Highly enantioselective catalytic phenylation of ketones with a constrained geometry titanium catalyst

[reaction: see text] The catalytic asymmetric addition of phenyl groups from diphenylzinc to ketones is reported. The catalyst, generated from a dihydroxy bis(sulfonamide) ligand and titanium tetraisopropoxide, gives good to excellent enantioselectivities with a range of substrates.     

Theoretical search for alternative nine-electron ligands suitable for superhalogen anions

The calculations performed at the OVGF/6-311++G(3df,3pd)//MP2/6-311++G(d,p) level for the representative NaX(2)(-) and AlX(4)(-) anions matching the MX(k+1)(-) superhalogen formula and utilizing 9-electron systems (i.e., consisting of various possible combinations of atoms containing nine electrons when brought together) revealed that the OH, Li(2)H(3), and NH(2) groups might be considered as alternative ligands X due to their thermodynamic stability and large values of electron binding energy (approaching or even exceeding 6 eV in some cases). All aluminum-containing AlX(4)(-) anions (excluding Al(HBLi)(4)(-)) were predicted to be thermodynamically stable, whereas the NaX(2)(-) anions for X = CH(3), HBLi, CLi, BeB, and H(2)BeLi were found to be susceptible to the fragmentations leading to Na(-) loss. Among the MX(k+1)(-) (M = Na, Al; X = Li(2)H(3), OH, H(2)BeLi, BeB, NH(2), HBLi, CH(3), Be(2)H, CLi) anions utilizing systems containing 9 electrons (and thus isoelectronic with the F atom) the largest vertical electron detachment energy of 6.38 eV was obtained for Al(OH)(4)(-).