Advances in rapid and effective break-in/conditioning/recovery of automotive PEMFC stacks

Automotive proton exchange membrane fuel cell stacks need to meet manufacturer specified rated beginning-of-life (BOL) performance before being assembled into vehicles and shipped off to customers. The process of “breaking-in” of a freshly assembled stack is often referred to as “conditioning.” It has become an intensely researched area especially in automotive companies, where imminent commercialization of fuel cell electric vehicles (FCEVs) demands a short, energy- and cost-efficient, and practical conditioning protocol. Significant advances in reducing the conditioning time from 1 to 2 days to as low as 4h or less, in some cases without the use of additional inert gases such as nitrogen, and with minimal use of hydrogen, and specialized test stations will be discussed.     

A DNA Switch for Detecting Single Nucleotide Polymorphism within a Long DNA Sequence Under Denaturing Conditions

DNA detection is usually conducted under nondenaturing conditions to favor the formation of Watson–Crick base-paring interactions. However, although such a setting is excellent for distinguishing a single-nucleotide polymorphism (SNP) within short DNA sequences (15–25 nucleotides), it does not offer a good solution to SNP detection within much longer sequences. Here we report on a new detection method capable of detecting SNP in a DNA sequence containing 35–90 nucleotides. This is achieved through incorporating into the recognition DNA sequence a previously discovered DNA molecule that forms a stable G-quadruplex in the presence of 7 molar urea, a known condition for denaturing DNA structures. The systems are configured to produce both colorimetric and fluorescent signals upon target binding.     

Fluoroalkyl Radical Generation by Homolytic Bond Dissociation in Pentacarbonylmanganese Derivatives

Thermal decarbonylation of the acyl compounds [Mn(CO)₅(COR_F)] (R_F=CF₃, CHF₂, CH₂CF₃, CF₂CH₃) yielded the corresponding alkyl derivatives [Mn(CO)₅(R_F)], some of which have not been previously reported. The compounds were fully characterized by analytical and spectroscopic methods and by several single-crystal X-ray diffraction studies. The solution-phase IR characterization in the CO stretching region, with the assistance of DFT calculations, has allowed the assignment of several weak bands to vibrations of the [Mn(¹²CO)₄(eq-¹³CO)(R_F)] and [Mn(¹²CO)₄(ax-¹³CO)(R_F)] isotopomers and a ranking of the R_F donor power in the order CF₃<CHF₂<CH₂CF₃≈CF₂CH₃. The homolytic Mn−R_F bond cleavage in [Mn(CO)₅(R_F)] at various temperatures under saturation conditions with trapping of the generated R_F radicals by excess tris(trimethylsilyl)silane yielded activation parameters ΔH^≠ and ΔS^≠ that are believed to represent close estimates of the homolytic bond dissociation thermodynamic parameters. These values are in close agreement with those calculated in a recent DFT study (J. Organomet. Chem. 2018 , 864, 12–18). The ability of these complexes to undergo homolytic Mn−R_F bond cleavage was further demonstrated by the observation that [Mn(CO)₅(CF₃)] (the compound with the strongest Mn−R_F bond) initiated the radical polymerization of vinylidene fluoride (CH₂=CF₂) to produce poly(vinylidene fluoride) in good yields by either thermal (100 °C) or photochemical (UV or visible light) activation.     

Isolation of Bisphenol A-Tolerating/degrading Shewanella haliotis Strain MH137742 from an Estuarine Environment

Applied Biochemistry and Biotechnology - The human exposure to bisphenol A (BPA) occurs frequently. Once, this compound was one of the highest volume chemicals produced worldwide and used as a...     

Applications of synchrotron radiation in materials analysis

The synchrotron radiation (SR) emitted by circulating high-energy electrons has extraordinary properties: The light is intensive and bright, it is tunable and highly collimated, and finally, it is linearly polarized. These exceptional properties have initiated a unique revival of many spectroscopies using electromagnetic radiation. The techniques of special concern for materials analysis which are treated in this article are: X-ray absorption, reflection, fluorescence, diffraction and topography. A number of examples will be given in order to illustrate the possibilities of these techniques when SR is used.On leave of absence from Institut für Festkörperforschung, KFA Jülich, D-5170 Jülich, Federal Republic of Germany     

Additive-subtractive phase-modulated speckle interferometry: Fringe visibility under partial decorrelation

Additive-subtractive phase modulated speckle interferometry (ASPMSI) is a technique that minimizes the susceptibility of speckle methods to environmental noise while providing fringes of good visibility. The method requires the acquisition of two consecutive video frames of additive-speckle images of the same two deformed states of an object at a rapid enough rate such that ambient noise is not a problem. The additive-speckle images as expected are of very poor visibility due to the presence of the self-interference term. An interframe phase-modulation is introduced and the two additive-speckle images are digitally subtracted to improve the fringe visibility by removing the self-interference term. The ASPM-SI method works with in-plane and out-of-plane deformation sensitive ESPI as well as with displacement-gradient sensitive speckle-shearing interferometry. It is shown that the ASPM-SI scheme has higher visibility than conventional additive-SI and performs consistently better than subtractive-SI schemes in the presence of partial interframe speckle decorrelating optical noise. Furthermore, it is shown that the fringe visibility of the out-of-plane displacement sensitive interferometer which uses a protected reference beam separate from the object beam can be made to be essentially unity even at complete interframe decorrelation.     

Visualization of industrial engineering data in Augmented Reality

This paper presents an innovative application of Augmented Reality (AR) techniques in the field of industrial engineering in which the user explores data from numerical simulations or the results of measurements and experiments, superimposed to the real object that they refer to. The user observes the object through a tablet PC, used as a video see-through handheld display. Data are visualized superimposed to the real object that represents a spatial reference relative to which the user can refer to, so the exploration is more natural compared to a traditional visualization software. Moreover, we have developed a new framework, called VTK4AR, that provides a set of useful software classes for the rapid development of AR applications for scientific visualization. VTK4AR is built on top of VTK (an open source API for scientific visualization), so it will be possible to employ a wide range of visualization techniques in many application fields, and moreover, it is possible to interactively manipulate data-sets in order to achieve a more effective way of visualization.     

A $\Gamma$-convergence result for doubling metric measures and associated perimeters

Abstract. In this paper we study the notion of perimeter associated with doubling metric measures or strongly weights. We prove that the metric perimeter in the sense of L. Ambrosio and M. Miranda jr. coincides with the metric Minkowski content and can be obtained also as a -limit of Modica-Mortola type degenerate integral functionals. Received: 27 August 2001 / Accepted: 29 November 2001 / Published online: 10 June 2002 Investigation supported by University of Bologna, funds for selected research topics and by GNAMPA of INdAM, Italy. The authors are very grateful to Luigi Ambrosio and Francesco Serra Cassano for making their preprints available to them, for listening with patience and for many unvaluable suggestions.