Functional Carbazole Liquid‐Crystal Block Codendrimers with Optical and Electronic Properties

The synthesis and characterisation of a family of block codendrimers consisting of highly versatile mesogenic and carbazole‐containing 2,2‐bis(hydroxymethyl)propionic acid (bis‐MPA) dendrons are reported. The liquid‐crystal behaviour was investigated by means of differential scanning calorimetry, polarised‐light optical microscopy and X‐ray diffraction. Depending on the chemical structure of the constituent dendrons, the codendrimers show lamellar or columnar mesophases. On the basis of the experimental results, models both at the molecular level and in the mesophase are proposed. The physical properties of the block codendrimers derived from the presence of the carbazole moiety in their structure were investigated: photoluminescence in solution and in the mesophase, electrochemical behaviour and hole transport. Electrodeposition of carbazole dendrons afforded a globular supramolecular conformation in which the mesogenic molecular side plays a key role.     

Free-radical reactions of diazonium salts with α,β-unsaturated carbonyl compounds. A new synthesis of 1,4-diarylpyrazole derivatives

Free-radical decomposition of diazonium salts catalyzed by titanous or titanous and ferrous salts in the presence of β-substituted α,β-unsaturated carbonyl compounds leads to 1,4-diarylpyrazole derivatives. The reaction occurs via an intermediate azo compound ( 1 ), which can be reduced by the metal salt or can be isolated and hydrogenated to pyrazole derivatives.     

Homolytic reductive alkylation of methylvinyl ketone with ethers by Ti(III) decomposition of t-butyl hydroperoxide

Reductive alkylatin of methylvinylketone has been accomplished by hydrogen abstraction from cyclic ethers with the redox couple: t-butyl hydroperoxide-titanous chloride. A redox radical mechanism is proposed and the selectivity of the hydrogen abstraction by t-butoxy radicals and reduction of α-ketoalkyl radical by titanous ions is discussed.     

Water wafers: structure and melting of a hydrate inclusion compound of a neutral Pt(IV) complex with 1-methylcytosinato ligands

The characterization by X-ray analysis of the trans,trans,trans-[bis(1-methylcytosinate,N4)bis(ammine)bis(hydroxo)platinum(IV)] octahydrate complex (I) reveals an unexpected crystal packing. The neutral complex molecule is hosted by layers, totally built up by water molecules which do not exhibit a direct coordination to metal ions. These corrugated layers are made by puckered eight- and planar four-membered rings of water molecules, held together by hydrogen bonds with an ordered proton arrangement.     

Influence of inhibitory compounds and minor sugars on xylitol production by <Emphasis Type="Italic">Debaryomyces hansenii</Emphasis>

To obtain in-depth information on the overall metabolic behavior of the new good xylitol producer Debaryomyces hansenii UFV-170, batch bioconversions were carried out using semisynthetic media with compositions simulating those of typical acidic hemicellulose hydrolysates of sugarcane bagasse. For this purpose, we used media containing glucose (4.3–6.5 g/L), xylose (60.1–92.1 g/L), or arabinose (5.9–9.2 g/L), or binary or ternary mixtures of them in either the presence or absence of typical inhibitors of acidic hydrolysates, such as furfural (1.0–5.0 g/L), hydroxymethylfurfural (0.01–0.30 g/L), acetic acid (0.5–3.0 g/L), and vanillin (0.5–3.0 g/L). D. hansenii exhibited a good tolerance to high sugar concentrations as well as to the presence of inhibiting compounds in the fermentation media. It was able to produce xylitol only from xylose, arabitol from arabinose, and no glucitol from glucose. Arabinose metabolization was incomplete, while ethanol was mainly produced from glucose and, to a lesser less extent, from xylose and arabinose. The results suggest potential application of this strain in xyloseto-xylitol bioconversion from complex xylose media from lignocellulosic materials.     

α-Hydroxyalkylation of heteroaromatic bases by alcohols and hydroxylamine-O-sulphonic acid

The homolytic decomposition of hydroxylamine-O-sulphonic acid in alcoholic solvents was investigated in the presence or absence of protonated heteroaromatic bases and Fe(II) salt. The addition of the α-hydroxyalkyl radicals to the base and their oxidation by Fe(III) salt to the corresponding alkyl cyanide were competitive processes. A redox chain process involving the amino radical cation, NH₃^t., is suggested and the factors affecting the yields of the homolytic substitution are discussed.     

Identification and assay of underivatized urinary acylcarnitines by paper spray tandem mass spectrometry

A new analytical approach, using paper spray tandem mass spectrometry, has been developed for assay of carnitine and acylcarnitines in urine. Paper spray (PS) is a very promising technique, especially in clinical investigations, because of its simplicity, low cost, and rapid sample preparation. A home-made paper spray device was used for assay of urinary acylcarnitines (C2–C18). The performance of solvents with different elution efficiency and paper substrates with different porosity grade and structure were tested by use of spiked synthetic urine. Tandem mass spectrometry in multiple reaction monitoring (MRM) mode was optimized to obtain better specificity and sensitivity. Analyte signals were evaluated for stability and reproducibility. Calibration with [²H₃]propionylcarnitine (C3-d3), [²H₃]octanoylcarnitine (C8-d3), and [²H₃] palmitoylcarnitine (C16-d3) as internal standards was used for quantification. Very good linearity was obtained, with correlation coefficients >0.99 for C0–C12 and C16 acylcarnitines and >0.96 for C14 and C18 acylcarnitines. Accuracy and precision (RSD, %) of the proposed procedure were tested at concentrations of 0.8, 8, and 20 mg L^?1 with very satisfactory results: overall mean accuracy was 98.9 % and overall mean relative standard deviation 1 %. Limits of detection (LOD) between 6 and 208 μg L^?1 for propionylcarnitine and tetradecanoylcarnitine, respectively, can be regarded as very satisfactory. Application of the method to real urine proved that paper spray tandem mass spectrometry is a simple, rapid, and direct tool (no derivatization is required) for assay of carnitine and C2–C12 acylcarnitines in urine.     

Tailoring the Thermal Conductivity of Rubber Nanocomposites by Inorganic Systems: Opportunities and Challenges for Their Application in Tires Formulation

The development of effective thermally conductive rubber nanocomposites for heat management represents a tricky point for several modern technologies, ranging from electronic devices to the tire industry. Since rubber materials generally exhibit poor thermal transfer, the addition of high loadings of different carbon-based or inorganic thermally conductive fillers is mandatory to achieve satisfactory heat dissipation performance. However, this dramatically alters the mechanical behavior of the final materials, representing a real limitation to their application. Moreover, upon fillers’ incorporation into the polymer matrix, interfacial thermal resistance arises due to differences between the phonon spectra and scattering at the hybrid interface between the phases. Thus, a suitable filler functionalization is required to avoid discontinuities in the thermal transfer. In this challenging scenario, the present review aims at summarizing the most recent efforts to improve the thermal conductivity of rubber nanocomposites by exploiting, in particular, inorganic and hybrid filler systems, focusing on those that may guarantee a viable transfer of lab-scale formulations to technological applicable solutions. The intrinsic relationship among the filler’s loading, structure, morphology, and interfacial features and the heat transfer in the rubber matrix will be explored in depth, with the ambition of providing some methodological tools for a more profitable design of thermally conductive rubber nanocomposites, especially those for the formulation of tires.     

Probenecid and benzamide: DSC applied to the study of an “impossible” pharmaceutical system

Journal of Thermal Analysis and Calorimetry - The study of the binary system probenecid–benzamide is an excellent example of the power and the limits of thermal analysis applied to the...     

The Physico-Chemical Properties of Glipizide: New Findings

The present work is a concrete example of how physico-chemical studies, if performed in depth, are crucial to understand the behavior of pharmaceutical solids and constitute a solid basis for the control of the reproducibility of the industrial batches. In particular, a deep study of the thermal behavior of glipizide, a hypoglycemic drug, was carried out with the aim of clarifying whether the recognition of its polymorphic forms can really be done on the basis of the endothermic peak that the literature studies attribute to the melting of the compound. A number of analytical techniques were used: thermal techniques (DSC, TGA), X-ray powder diffraction (XRPD), FT-IR spectroscopy and scanning electron microscopy (SEM). Great attention was paid to the experimental design and to the interpretation of the combined results obtained by all these techniques. We proved that the attribution of the endothermic peak shown by glipizide to its melting was actually wrong. The DSC peak is no doubt triggered by a decomposition process that involves gas evolution (cyclohexanamine and carbon dioxide) and formation of 5-methyl-N-[2-(4-sulphamoylphenyl) ethyl] pyrazine-2-carboxamide, which remains as decomposition residue. Thermal treatments properly designed and the combined use of DSC with FT-IR and XRPD led to identifying a new polymorphic form of 5-methyl-N-[2-(4-sulphamoylphenyl) ethyl] pyrazine-2-carboxamide, which is obtained by crystallization from the melt. Hence, our results put into evidence that the check of the polymorphic form of glipizide cannot be based on the temperature values of the DSC peak, since such a peak is due to a decomposition process whose Tonset value is strongly affected by the particle size. Kinetic studies of the decomposition process show the high stability of solid glipizide at room temperature.