Reduction of dislocation density and improvement of optical quality in ZnO layers by MgO-buffer annealing

Optical properties of ZnO thin films with/without MgO-buffer annealing were investigated by low and room temperature photoluminescence measurements. The ZnO films were grown on c-sapphire substrates by plasma-assisted molecular-beam epitaxy employing a thin MgO-buffer layer. Dislocation density of ZnO layer was reduced from 5.3 × 10⁹ to 1.9 × 10⁹ cm⁻² by annealing MgO-buffer prior to the growth of ZnO. The intensity of free exciton emission from the sample with MgO-buffer annealing was almost twice of that from the sample without annealing, while the deep level emission from the sample with MgO-buffer annealing was about 1/3 of that without annealing. The MgO-buffer annealing improves optical quality of overgrown ZnO films.     

α,β-Unsaturated γ-Oxo Carboxylic Acids in Heterocylic Synthesis II. Behavior of 4-(5,5-Dioxodibenzothiophen-2-yl)-4-oxo-2-butenoic Acid Towards Carbon Nucleophiles under Michael Reaction Condition

4-(5,5-Dioxodibenzothiophen-2-yl)-4-oxo-2-butenoic acid ( 1 ) was condensed with compounds containing active methylene groups under Michael reaction conditions to form the Michael adducts 2a-c , 3a-c , and 4a-b . The behavior of Michael adduct towards the action of hydrazine hydrate was investigated. The compounds were tested for biological properties.     

Chemistry of Phosphorus Ylides. Part 34 Synthesis of Chromenone Phosphanylidene and Cyclobutylidene Derivatives

Abstract

The reaction of nucleophilic phosphacumulene ylides with visnaginone and khellinone afforded the corresponding phosphanylidene and furochromene derivatives. Moreover, pyranochromenes were obtained from the reaction of chromene carbaldehydes with phosphacumulenes. On the other hand, the phosphanylidene-cyclobutylidenes and their dimers were produced from the reaction of furochromene carbaldehydes with the same phosphonium reagents.     

Analysis of visual perception of light emitting diode brightness in dense fog with various droplet sizes

Road signs must provide a conspicuous signal to a wide variety of drivers over a broad range of environmental and geometric conditions. Recently, there are an increasing number of applications in which light emitting diodes (LEDs) are used as the light source, including critical transportation signaling. In the presence of fog, the resulting visual signal is disturbed due to light scattering by airborne water droplets. By measuring LED brightness with human spectral sensitivity in various densities and various droplet sizes (10, 30, 50, and 100 μm), it is understood that the particle size distribution (fog droplet size) and density of fog does affect visibility in fog. The colored LEDs that contain a yellow component had high brightness evaluation, blue component had low brightness evaluation in all densities and different droplet sizes. The result in this paper can contribute to air and land traffic safety and the prevention of accidents.     

Positive-, negative-, and orthogonal-phase-velocity propagation of electromagnetic plane waves in a simply moving medium

Planewave propagation in a simply moving, dielectric-magnetic medium that is isotropic in the co-moving reference frame, is classified into three different categories: positive-, negative-, and orthogonal-phase-velocity (PPV, NPV, and OPV). Calculations from the perspective of an observer located in a non-co-moving reference frame show that, whether the nature of planewave propagation is PPV or NPV (or OPV in the case of non-dissipative mediums) depends strongly upon the magnitude and direction of that observer's velocity relative to the medium. PPV propagation is characterized by a positive real wavenumber, NPV propagation by a negative real wavenumber. OPV propagation only occurs for non-dissipative mediums, but weakly dissipative mediums can support nearly OPV propagation.     

Novel bismuth and lead coordination polymers synthesized with pyridine-2,5-dicarboxylates: two single component "white" light emitting phosphors

New two-dimensional (2D) bismuth and three-dimensional (3D) lead based coordination polymers containing pyridine-2,5-dicarboxylate ligands (H(2)pydc) have been synthesized hydrothermally and characterized by single crystal X-ray diffraction. Bi(3)(μ(3)-O)(2)(pydc)(2)(Hpydc)(H(2)O)(2) (1), which crystallizes in the space group P1? (a = 8.7256(5) ?, b = 11.1217(7) ?, c = 14.0933(9) ?, α = 85.239(1)°, β = 98.582(1)°, γ = 71.106(1)°), has a 3D structure that contains Bi(6)O(4) clusters that connect into 2D sheets via linking ligands. The sheets form a 3D supramolecular structure via hydrogen bonding along the z-axis. Pb(pydc)(H(2)O) (2), which crystallizes in the space group P2(1)/c (a = 10.8343(14) ?, b = 11.2099(15) ?, c = 6.6573(9) ?, β = 90.697(2)°), contains 1D chains of corner-sharing distorted face capped trigonal prisms that are connected into a 3D framework via the pydc ligand. In addition, the ligands are hydrogen bonded to each other. Both 1 and 2 are single component "white" light emitting phosphors and are shown to exhibit "white" luminescence that covers a much wider spectral range than is observed for the as received H(2)pydc ligand.     

On the magnetic insulating states, spin frustration, and dominant spin exchange of the ordered double-perovskites Sr2CuOsO6 and Sr2NiOsO6: density functional analysis

The ordered double-perovskites Sr(2)MOsO(6) (M = Cu, Ni) consisting of 3d and 5d transition-metal magnetic ions (M(2+) and Os(6+), respectively) are magnetic insulators; the magnetic susceptibilities of Sr(2)CuOsO(6) and Sr(2)NiOsO(6) obey the Curie-Weiss law with dominant antiferromagnetic and ferromagnetic interactions, respectively, and the zero-field-cooled and field-cooled susceptibility curves of both compounds diverge below ～20 K. In contrast, the available density functional studies predicted both Sr(2)CuOsO(6) and Sr(2)NiOsO(6) to be metals. We resolved this discrepancy on the basis of systematic density functional calculations. The magnetic insulating states of Sr(2)MOsO(6) are found only when a substantially large on-site repulsion is employed for the Os atom, although it is a 5d element. The cause for the divergence between the zero-field-cooled and field-cooled susceptibility curves in both compounds and the reason for the difference in their dominant magnetic interactions were investigated by examining their spin exchange interactions.     

Influences of Acid on Molecular Forms of Fluorescein and Photoinduced Electron Transfer in Fluorescein‐Dispersing Sol–Gel Titania Films

Fluorescein‐dispersing titania gel films were prepared by the acid‐catalyzed sol–gel reaction using a titanium alkoxide solution containing fluorescein. The molecular forms of fluorescein in the films, depending on its acid–base equilibria, and the complex formation and photoinduced electron transfer process between the dye and titania surface were investigated by fluorescence and photoelectric measurements. The titanium species were coordinated to the carboxylate and phenolate‐like groups of the fluorescein species. The quantum efficiencies of the fluorescence quenching and photoelectric conversion were higher upon excitation of the dianion species interacting with the titania, i.e. the dye–titania complex. This result indicated that the dianion form was the most favorable for formation of the dye–titania complex exhibiting the highest electron transfer efficiency. Using nitric acid as the catalyst, the titania surface bonded to the fluorescein instead of the adsorbed nitrate ion during the steam treatment. The dye–titania complex formation played an important role in the electron injection from the dye to the titania conduction band.     

Microtomography of Imbibition Phenomena and Trapping Mechanism

Water imbibition during the waterflooding process of oil production only sweeps part of the oil present. After water disrupts the oil continuity, most oil blobs are trapped in porous rock by capillary forces. Developing an efficient waterflooding scheme is a difficult task; therefore, an understanding of the oil trapping mechanism in porous rock is necessary from a microscopic viewpoint. The development of microfocused X-ray CT scanner technology enables the three-dimensional visualization of multiphase phenomena in a pore-scale. We scanned packed glass beads filled with a nonwetting phase (NWP) and injected wetting phase (WP) in upward and downward injections to determine the microscopic mechanism of immiscible displacement in porous media and the effects of buoyancy forces. We observed the imbibition phenomena for small capillary numbers to understand the spontaneous imbibition mechanism in oil recovery. This study is one of the first attempts to use a microfocused X-ray CT scanner for observing the imbibition and trapping mechanisms. The trapping mechanism in spontaneous imbibition is determined by the pore configuration causing imbibition speed differences in each channel; these differences can disrupt the oil continuity. Gravity plays an important role in spontaneous imbibition. In upward injection, the WP flows evenly and oil is trapped in single or small clusters of pores. In downward injection, the fingering phenomena determine the amount of trapped oil, which is usually in a network scale. Water breakthrough causes dramatic decrease in the oil extraction rate, resulting in lower oil production efficiency.     

Cardinality enrichment of flexible cross correlation (FCC) code for SAC-OCDMA system by alleviation interference scheme (AIS)

In this paper, we propose an alleviation interference scheme (AIS) for spectral amplitude coding (SAC) – optical code division multiple access (OCDMA) coding system approaches. The AIS SAC-OCDMA systems is demonstrated by utilizing the new flexible cross correlation (FCC) code. The FCC code has advantages, such as flexibility in-phase cross-correlation at any given number of users and weights, as well as effectively reduces the impacts of phase-induced intensity noise (PIIN) and has the multiple-access interference (MAI) cancelation property. The results indicated good performance whereas the FCC (W = 4, K = 150) AIS SAC-OCDMA coding system offers 66%, 172%, 650% and 900% percentage of cardinality enrichments as a contrast to DCS (W = 4, K = 90), MDW (W = 4, K = 55), MFH (W = 4, K = 20) and Hadamard (W = 8, K = 15) codes, respectively. Finally, the FCC AIS SAC-OCDMA coding system has low effective receive power Psr = −21 dBm which is expected to be more significant for future SAC-OCDMA coding systems without requiring any amplification at the receiving plant.