Measuring length of business cycles across countries using a new non‐stationary unit‐root cyclical approach

This article examines the length of the cycles in the gross domestic product (GDP) real per capita series of 15 countries by means of new statistical techniques based on unit root cycles. We propose tests for unit root cycles at each of the frequencies of the process. Using this approach, we are able to approximate the number of periods per cycle. The results show that the cycles have a periodicity of approximately six years when the disturbances are white noise. However, if we permit autocorrelation, they may also occur at smaller intervals of time. Copyright © 2006 John Wiley & Sons, Ltd.     

Sodiation Of Hard Carbon: How Separating Enthalpy And Entropy Contributions Can Find Transitions Hidden In The Voltage Profile

Sodium-ion batteries (NIBs) utilize cheaper materials than lithium-ion batteries (LIBs) and can thus be used in larger scale applications. The preferred anode material is hard carbon, because sodium cannot be inserted into graphite. We apply experimental entropy profiling (EP), where the cell temperature is changed under open circuit conditions. EP has been used to characterize LIBs; here, we demonstrate the first application of EP to any NIB material. The voltage versus sodiation fraction curves (voltage profiles) of hard carbon lack clear features, consisting only of a slope and a plateau, making it difficult to clarify the structural features of hard carbon that could optimize cell performance. We find additional features through EP that are masked in the voltage profiles. We fit lattice gas models of hard carbon sodiation to experimental EP and system enthalpy, obtaining: 1. a theoretical maximum capacity, 2. interlayer versus pore filled sodium with state of charge.     

Heat‐Free Biomimetic Metal Molding on Soft Substrates

Fabrication of bio‐templated metallic structures is limited by differences in properties, processing conditions, packing, and material state(s). Herein, by using undercooled metal particles, differences in modulus and processing temperatures can be overcome. Adoption of autonomous processes such as self‐filtration, capillary pressure, and evaporative concentration leads to enhanced packing, stabilization (jamming) and point sintering with phase change to create solid metal replicas of complex bio‐based features. Differentiation of subtle differences between cultivars of the rose flower with reproduction over large areas shows that this biomimetic metal patterning (BIOMAP) is a versatile method to replicate biological features either as positive or negative reliefs irrespective of the substrate. Using rose petal patterns, we illustrate the versatility of bio‐templated mapping with undercooled metal particles at ambient conditions, and with unprecedented efficiency for metal structures.     

Crystallization and characterization of an inflammatory lectin purified from the seeds of Dioclea wilsonii

DwL, a lectin extracted from the seeds of Dioclea wilsonii, is a metalloprotein with strong agglutinating activity against rabbit and ABO erythrocytes, inhibited by glucose and mannose. DwL was purified by affinity chromatography on a Sephadex G-50 column and ion exchange chromatography on a HiTrap SP XL column. SDS-PAGE revealed three electrophoretic bands corresponding to the α (25,634 ± 2 Da), β (12,873 ± 2 Da) and γ (12,779 ± 2 Da) chains. Protein sequencing was done by Tandem Mass Spectrometry. The primary sequence featured 237 amino acids and was highly homologous to other reported Diocleinae lectins. A complete X-ray dataset was collected at 2.0 ? for X-Man-complexed DWL crystals produced by the vapor diffusion method. The crystals were orthorhombic and belonged to the space group I222, with the unit-cell parameters a = 59.6, b = 67.9 and c = 109.0 ?. DWL differed in potency from other ConA-like lectins and was found to induce neutrophil migration in rats, making it particularly useful in structural/functional studies of this class of proteins.     

Yttrium-86 Is a Positron Emitting Surrogate of Gadolinium for Noninvasive Quantification of Whole-Body Distribution of Gadolinium-Based Contrast Agents

Gadolinium-based contrast agents (GBCAs) are used to provide diagnostic information in clinical magnetic resonance (MR) examinations. Gadolinium (Gd) has been detected in the brain, bone and skin of patients, months and years following GBCA administration, raising concerns about long term toxicity. Despite increased scrutiny, the concentration, chemical form and fate of the retained gadolinium species remain unknown. Importantly, the whole body biodistribution and organ clearance of GBCAs is poorly understood in humans. Gadolinium lacks suitable isotopes for nuclear imaging. We demonstrate that the yttrium-86 isotope can be used as a gadolinium surrogate. We show that Gd and their analogous Y complexes have similar properties both in solution and in vivo, and that yttrium-86 PET can be used to track the biodistribution of GBCAs over a two-day period.     

Spatially Directed Pyrolysis via Thermally Morphing Surface Adducts

Combustion is often difficult to spatially direct or tune associated kinetics—hence a run-away reaction. Coupling pyrolytic chemical transformation to mass transport and reaction rates (Damköhler number), however, we spatially directed ignition with concomitant switch from combustion to pyrolysis (low oxidant). A ‘surface-then-core’ order in ignition, with concomitant change in burning rate,is therefore established. Herein, alkysilanes grafted onto cellulose fibers are pyrolyzed into non-flammable SiO₂ terminating surface ignition propagation, hence stalling flame propagating. Sustaining high temperatures, however, triggers ignition in the bulk of the fibers but under restricted gas flow (oxidant and/or waste) hence significantly low rate of ignition propagation and pyrolysis compared to open flame (Liñán's equation). This leads to inside-out thermal degradation and, with felicitous choice of conditions, formation of graphitic tubes. Given the temperature dependence, imbibing fibers with an exothermically oxidizing synthon (MnCl₂) or a heat sink (KCl) abets or inhibits pyrolysis leading to tuneable wall thickness. We apply this approach to create magnetic, paramagnetic, or oxide containing carbon fibers. Given the surface sensitivity, we illustrate fabrication of nm- and μm-diameter tubes from appropriately sized fibers.     

Dynamics of low temperature induced water shedding from AOT reverse micelles

The effects of low temperature and ionic strength on water encapsulated within reverse micelles were investigated by solution NMR. Reverse micelles composed of AOT and pentane and solutions with varying concentrations of NaCl were studied at temperatures ranging from 20 degrees C to -30 degrees C. One-dimensional (1)H solution NMR spectroscopy was used to monitor the quantity and structure of encapsulated water. At low temperatures, e.g., -30 degrees C, reverse micelles lose water at rates that are dependent on the ionic strength of the aqueous nanopool. The final water loading (w0 = [water]/[surfactant]) of the reverse micelles is likewise dependent on the ionic strength of the aqueous phase. Remarkably, water resonance(s) at temperatures between -20 degrees C and -30 degrees C displayed fine structure indicating the presence of multiple transient water populations. Results of this study demonstrate that reverse micelles are an excellent vehicle for studies of confined water across a broad range of conditions, including the temperature range that provides access to the supercooled state.     

Fast local backbone dynamics of encapsulated ubiquitin

Backbone dynamics of ubiquitin confined within AOT reverse micelles have been evaluated based on analysis of 15N NMR relaxation data. Results indicate that upon encapsulation the protein experiences a slight overall increase in the value of the order parameter, S2, indicating a restriction in the average amplitude of fast local N-H bond vector motion. The largest increases in S2 upon encapsulation were concentrated in the region of beta-sheet 2 and, additionally, at the transitions of secondary structure motifs and loop regions. In addition, statistical analysis of the residue average ratio of the 15N longitudinal and transverse NMR relaxation time constants indicates that chemical exchange contributions to relaxation are consistent with previous aqueous studies. Earlier studies have demonstrated that native protein structure can be maintained in the encapsulated state. These results presented here establish that the dynamical behavior of encapsulated ubiquitin is likewise nativelike and adds important new observations regarding the enhancement of protein stability under confinement.     

Generation of (nonafluoro-tert-butoxy)methyl ponytails for enhanced fluorous partition of aromatics and heterocycles

The reaction of sodium perfluoro-tert-butoxide with benzylic carbon-bromide bond(s) leads to the formation of (nonafluoro-tert-butoxy)methyl ponytail(s), which can enhance the fluorous solubility and partition of aromatics and heterocycles.     

Atom-Transfer Cyclization with CuSO(4)/KBH(4): A Formal "Activators Generated by Electron Transfer" Process Also Applicable to Atom-Transfer Polymerization

The 4-exo and 5-exo-trig atom-transfer cyclizations of 1, 8a-e, 9, 12, and 13 can be mediated with as little as 0.05 mol % of Cu(TPMA)SO(4)·5H(2)O in the presence of 2.5 mol % of borohydride salts in 10 min at room temperature in air. This formal "activators generated by electron transfer" (AGET) procedure utilizes a cheap and oxidatively stable copper source (CuSO(4)·5H(2)O) and can be carried out in environmentally benign solvents (EtOH). It is possible to alter the product distribution in the 5-endo radical-polar crossover reactions of 10a,b and 11 by tailoring the amount of borohydride. Cyclization onto alkynes 14 and 15 is also possible in only 20 min. Controlled radical polymerization of styrene, with increased rates over conventional atom-transfer radical polymerization (ATRP), can be carried out in a controlled fashion (Mn, PDI) using either CuBr or CuSO(4)·5H(2)O and Bu(4)NBH(4).