Vacuum‐driven fluid manipulation by a piezoelectric diaphragm micropump for microfluidic droplet generation with a rapid system response time

Recently, we developed a convenient microfluidic droplet generation device based on vacuum‐driven fluid manipulation with a piezoelectric diaphragm micropump. In the present study built on our previous work, we investigate the influence of settings applied to the piezoelectric pump, such as peak‐to‐peak drive voltage (V_p‐p) and wave frequency, on droplet generation characteristics. Stepwise adjustments to the drive voltage in ±10‐V_p‐p increments over the range of 200?250 V_p‐p during droplet creation revealed that the droplet generation rate could be reproducibly controlled at a specific drive voltage. The droplet generation rate switched within <0.5 s after the input of a new voltage. Although the droplet generation rate depended on the drive voltage, this setting had almost no influence on droplet size. The frequency over the selected range (50?60 Hz) did not markedly influence the droplet generation rate or droplet size. We show that the current fluid manipulation system can be conveniently used for both droplet generation and for rapid droplet reading, which is required in many microfluidic‐based applications.     

双奇核188Au的准粒子带结构研究

利用在束γ谱学实验技术, 通过¹⁷³Yb(¹⁹F,4nγ)反应 布居了¹⁸⁸Au的高自旋态, 并对其准粒子带结构进行了研究. 基于实验测量结果, 对原有的双奇核¹⁸⁸Au能级纲图做了较大的修改. 通过系统性比较, 对15⁺以上的能级结构进行了讨论.     

On spectrums of certain harmonic functions attached to the Riemann zeta-function

A. Beurling introduced harmonic functions attached to measurable functions satisfying suitable conditions and defined their spectral sets. The concept of spectral sets is closely related to approximations by trigonometric polynomials. In this paper we consider spectral sets of the harmonic functions attached to the Riemann zeta-function and its modification.     

Crosslinked poly(N-isopropylacrylamide) gel for electrophoretic separation and recovery of substances

Crosslinked poly(N-isopropylacrylamide) gel was tested on the feasibility for a preparative electrophoretic matrix. Horse heart myoglobin and bovine hemoglobin were well separated on the gel matrix electrophoretically by molecular sieving effect of the gel network. Relative mobilities of those proteins in the gel were larger than those in a crosslinked polyacrylamide gel of the same polymer concentration. After the separation, the protein-containing portion of the gel underwent swelling at 4°C and deswelling at 37°C, alternatively. As a result of the deswelling, each protein was recovered in a discharged solution out of the gel at almost 100% yield.     

Magneto-Optical Measurement of Organic Conductor Using Rotational Cavity System

We have developed a new magneto-optical measurement system using a rotational cavity system equipped with a millimeter vector network analyzer and a 14 T solenoid type super conducting magnet. The measurement can be performed in the transmission configuration down to 1.6 K. The results of the precise angular dependence measurement of quasi-one-dimensional organic conductor (DMET)₂I₃ using the new system are shown, and its Fermi surface will be discussed in connection with the previous reports.     

Rotational bands in 181Ta

High-spin states in ¹⁸¹Ta have been studied via the ¹⁷⁶Yb(¹¹B,α2n) reaction at 52 MeV using the PEX array and at 57 MeV using the NORDBALL array, with α-particle detection. The previously known, K^π=(7/2)⁺ ground state band and K^π=(9/2)⁻ band have been extended to spins (29/2)⁺ and (31/2)⁻, respectively. Two new one-quasiparticle bands, the K^π=(5/2)⁺ band built on the known (5/2)⁺ isomer and a K^π=((1/2)⁻) band have been observed. Two other rotational bands with three-quasiparticle structure, K^π=(15/2)⁻ and ((19/2)⁺ with π(7/2)[404]ν²(1/2)[510](9/2)[624] and π(9/2)[514]ν²(1/2)[510](9/2)[624] configurations, respectively, have been newly observed. The half-life of the K^π=((19/2)⁺) bandhead which decays to the head of the (15/2)⁻ band has been measured to be 140(36) ns. However, transitions from the ((19/2)⁺) state to the (15/2)⁻ band have not been observed. Received: 26 August 1998     

Control of the bioluminescence starting time by inoculated cell density.

In this study, we attempted to control the timing of light-emission from bioluminescent bacteria, by changed cell numbers inoculated into medium. Luminous bacteria express bioluminescence when the number of cells reached a threshold. Inoculated cell density had an effect on the time of bioluminescence starting. Samples were prepared by varying cell density of inoculation. In the results, all the vials showed different luminescence profiles in the order of inoculated cell population.     

Novel flow injection-fluorometric method for the determination of trace silicate and its application to ultrapurified water analysis

A highly sensitive fluorescence quenching method for the determination of silicate based on the formation of an ion associate between molybdosilicate and Rhodamine B (RB) in nitric acid medium was developed. A flow injection system coupled with a fluorescence detector was used for the measurement of fluorescence intensity at 560 and 580 nm as excitation and emission wavelengths, respectively. The calibration graph for Si showed a linear range of 0.1–5 ng cm⁻³ with correlation coefficient of 0.9999, and the detection limit of 0.06 ng cm⁻³. The proposed method was successfully applied to the determination of silicate in ultrapurified water with satisfactory results.