In‐situ synthesis of transparent and conductive carbon nanotube networks

A method for the production of transparent carbon nanotube networks (CNTNs) over transparent substrates was developed. In this method, CNTNs were grown directly in the target surface by applying the catalyst in specific zones of the substrate through lithographic techniques. The networks can be also transferred from the original substrate to other surfaces. The newly grown carbon nanotubes have a very high aspect ratio (>50000). Thus far, networks with an optical transmittance of 94% at 550 nm and a surface resistivity of 3.6 kΩ/sq have been produced. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Insertion of benzothiazolium compounds into montmorillonite interlayers

Benzothiazolium compounds exhibit pronounced antimicrobial activities and stimulation effects on plant growth. When applied to fields they can pollute soil colloids. In contact with the soil they can potentially interact with a clay fraction giving rise to clay organocomplexes. Model intercalation complexes were prepared using monoionic montmorillonite and a variety of water-soluble benzothia zolium salts. It was found that the adsorption into the silicate interlayer space proceeds via a cation exchange process. Substantial differences were observed in the extent of the reaction between non-substituted andN-substituted species. The sulphur atoms present in the benzothiazolium molecules repel the surface oxygen atom: this is considered to be the factor responsible for prevention of insertion of the guest cations perpendicular to the layers.     

Microwave-assisted arylation of rac-(E)-3-acetoxy-1,3-diphenylprop-1-ene with arylboronic acids

The palladium-catalyzed arylation of rac-(E)-3-acetoxy-1,3-diphenylprop-1-ene with arylboronic acids was studied under controlled microwave irradiation conditions. A variety of different catalysts, bases, and solvents were explored in order to achieve optimum yields in the shortest possible reaction times. The best isolated yields were obtained using Pd₂(dba)₃·CHCl₃/PPh₃ as the catalytic system, potassium phosphate monohydrate as the base, and toluene/H₂O as a solvent system. Microwave irradiation using 5 mol % of the palladium catalyst for 90 s (max. temp 170 °C) generally afforded the cross-coupling products in good to excellent yields.     

Microwave-promoted cross-coupling of acid chlorides with arylboronic acids: a convenient method for preparing aromatic ketones

Simple catalytic systems for cross-coupling reactions of acyl chlorides with arylboronic acids under microwave conditions were tested. Microwave irradiation facilitated the reaction course. Mild reaction conditions afford the symmetrical and unsymmetrical aryl ketones in reasonable to high yields within a short time. A wide range of substrates bearing an electron-donating or an electron-withdrawing substituent on aryl ring of acid chloride as well as on boronic acid were examined and high yields of ketones were produced.     

Determination of organochlorine pesticides (OCPs) in breast milk from Rio Grande do Sul,Brazil, using a modified QuEChERS method and gas chromatography-negative chemical ionisation-mass spectrometry

ABSTRACT

The food chain is the main source of exposure to humans by organochlorine pesticides (OCPs) due to the bioaccumulation. Breast milk can accumulate OCPs, so this matrix is often used as an environmental bioindicator. The currently available methods for the determination of several OCPs and metabolites in breast milk involve, in general, multi-step sample preparation and quantification techniques with low selectivity, high cost and much time and labour. Thus, a fast and efficient method based on sample preparation using the quick, easy, cheap, effective, rugged and safe (QuEChERS) method combined with gas chromatography coupled to mass spectrometry with negative chemical ionisation (GC-NCI-MS) was developed, validated and applied for determination of 16 OCPs and metabolites in breast milk samples. The extract was cleaned by dispersive solid-phase extraction (d-SPE) using MgSO₄ and C18, evaporated in a Turbovap® system, redissolved and analysed by GC-NCI-MS. The method was validated showing acceptable recoveries (72–118%) and precision (RSD <19%). Method limits of detection (LODs) and quantification (LOQs) ranged from 0.75 to 7.5 ng g^?1 and from 2.5 to 25 ng g^?1 lipid, respectively. The method was successfully applied to 20 samples of breast milk from different regions of the Rio Grande do Sul state, Brazil, of which 75% contained residues below the LOQs.     

Microwave-Assisted Method for Synthesis of 1,3-Disubstituted Pyrroles

1,3-Disubstituted pyrroles were prepared by a microwave-assisted reaction of pyrrolidine and aldehydes in toluene as well as in solvent-free conditions. Reactions were completed in a few minutes in the solvent-free condition but a long time (up to 30 min) was necessary to complete reactions in toluene. Yields of products depended considerably on the aldehyde used.     

Taxicab geometry in table of higher-order elements

Nonlinear Dynamics - The paper deals with the analysis of the order of the differential equation of motion describing the dynamics of a one-port network compounded of series or parallel connections...     

Polymerization in inverse microemulsion

Homopolymerization of acrylamide as well as that of methyl methacrylate and the copolymerization of acrylamide with methyl methacrylate and/or styrene in inverse microemulsion toluene/water 10: 1 by weight have been studied. Water-soluble ammonium peroxodisulfate, partially water-soluble 2,2′-azobisisobutyronitrile, and oil-soluble dibenzoyl peroxide were used for initiation of these polymerizations at 60°C. Redox initiation system consisting of ammonium peroxodisulfate and tetramethylethylenediamine has been used for an effective initiation of the reactions studied at 30°C. Polymerizations in inverse microemulsions were found start in the interlayer oil macrophase/water microphase. The initial rates of copolymerizations reactions studied depended only on the comonomer mixture composition. The type of the initiator used affected only the exhibited inhibition period.     

Solubility of Na2Co3 in NaCl:CaCl2 crystals

Measurements of electrical conductivity of NaCl 10^–5 molar fr. CaCl2 (1–80)×10^–5 molar fr. Na₂CO₃ crystals have been used to determine the temperature dependence of the solubility of CO₃-ions over the temperature range from 75 to 530 °C. The total solubility of CO₃-ions and that of [CO ₃ ^2– -vacancy] complexes may be expressed by simple relationships andc _ka=3·19× 10^–2 exp (–0·25 eV/kT), resp. The heat of solution of complexes is equal to 0·25 eV and that of free CO ₃ ^2– ions is higher than 1·2 eV. Under conditions of the thermal equilibrium between the solid solution and precipitate, the ratio of Na₂CO₃ and CaCO₃ components in the precipitate has been calculated at various temperatures and CO₃ concentrations.