Determination of moxifloxacin in tablets and human urine by square-wave adsorptive voltammetry

This work presents an electroanalytical methodology developed for square-wave voltammetry based in the electrochemical reduction in hanging mercury drop electrode (HMDE), which is simple, fast, reliable and sensitive for determination of moxifloxacin (MOXI) in tablets and spiked urine human samples. The support electrolyte that provided a more defined and intense peak current for MOXI determination was the phosphate buffer 0.04 mol l^{− 1} pH 8.0. In the best-optimized conditions the drug presented an only peak of reduction at − 1.38 V vs. Ag/AgCl, using an E_acc. of − 0.30 V. An LOD of 0.44 and 3.20 ng ml^{− 1} and an LOQ of 1.46 and 10.60 ng ml^{− 1} were found for the pure standard of moxifloxacin and in the presence of matrix, respectively. A good recovery was obtained for assay spiked urine samples and a good quantification of MOXI was achieved in a commercial formulation. The methodology proposed was more sensitive than the spectrofluorimetric and spectrophotometric method with precision and accuracy equivalent.     

Separation of natural antioxidants using PDMS electrophoresis microchips coupled with amperometric detection and reverse polarity

This report describes the use of PDMS ME coupled with amperometric detection for rapid separation of ascorbic, gallic , ferulic, p‐coumaric acids using reverse polarity. ME devices were fabricated in PDMS by soft lithography and detection was accomplished using an integrated carbon fiber working electrode aligned in the end‐channel configuration. Separation and detection parameters were investigated and the best conditions were obtained using a run buffer consisting of 5 mM phosphate buffer (pH 6.9) and a detection voltage of 1.0 V versus Ag/AgCl reference electrode. All compounds were separated within 70 s using gated injection mode with baseline resolution and separation efficiencies between 1200 and 9000 plates. Calibration curves exhibited good linearity and the LODs achieved ranged from 1.7 to 9.7 μM. The precision for migration time and peak height provided maximum values of 4% for the intrachip studies. Lastly, the analytical method was successfully applied for the analysis of ascorbic and gallic acids in commercial beverage samples. The results achieved using ME coupled with amperometric detection were in good agreement with the values provided by the supplier. Based on the data reported here, the proposed method shows suitability to be applied for the routine analysis of beverage samples.     

Determination of thiodicarb using a biosensor based on alfalfa sprout peroxidase immobilized in self-assembled monolayers

A biosensor based on alfalfa sprout (Medicago sativa) homogenate as a source of peroxidase is proposed for the determination of thiodicarb by square-wave voltammetry. This enzyme was immobilized in self-assembled monolayers of l-cysteine on a gold electrode. Several parameters were investigated to evaluate the optimum conditions for operation of the biosensor. The analytical curve was linear for thiodicarb concentrations of 2.27 × 10⁻⁶ to 4.40 × 10⁻⁵ mol L⁻¹ with a detection limit of 5.75 × 10⁻⁷ mol L⁻¹. The lifetime of the Au-alfalfa sprout-SAMs was 20 days (at least 220 determinations). The average recovery of thiodicarb from samples of vegetable extracts ranged from 99.02 to 101.04%. The results obtained for thiodicarb in vegetable extracts using the proposed method are in close agreement with those using a high performance liquid chromatography procedure at the 95% confidence level.     

Kinetic studies of urban solid residues and leachate from sanitary landfill

Urban solid residues are constituted of food remaining, grass leaves, fruit peelings, paper, cardboard, rubber, plastic, etc. The organic fraction formed represents about 50% during the decomposition yields biogas and leachate, which are sources of pollution. Residue samples were collected from the landfill in different and cells from several ages and the corresponding leachate, both after treatments, were submitted to thermal analysis. Kinetic parameters were determined using Flynn–Wall–Ozawa method. The linear relation between the two kinetic parameters (ln A and E) was verified for organic residue urban’s samples, but not for leachate’s sample. The occurred difference can be attributed to the constituents present in leachate.     

ToF-SIMS characterisation of diterpenoic acids after chromatographic separation

Microcolumn liquid chromatography (μHPLC) coupled on-line with time of flight secondary ion mass spectrometry (ToF-SIMS) was applied for mixture of diterpenoic acids (abietic, gibberellic and kaurenoic) analysis. Chromatographic effluent, with analytes separated, was carried out directly onto different, ToF-SIMS compatible surface substrates, for further ToF-SIMS analysis. Silica gel Si₆₀, aluminium backplate modified Si₆₀, monolithic silica gel and Raman spectroscopy chromatographic thin layers were used as the deposition substrates in this experiment. By ToF-SIMS surface imaging the deposition trace picture has been obtained. Effluent deposition surface area was scanned for diterpenoic acid fragment mass values based on mass spectrometric library. Measured ToF-SIMS dataset of fragment abundance and intensities were used for preliminary fragmentation schemes construction. The lowest substrate background activity has been established for monolithic silica gel thin layer and aluminium backplate modified Si₆₀ thin layer. In the case of Raman spectroscopy pre-treated thin layer or conventional chromatographic thin layer Si₆₀, the both, high background signal intensity and impossibility to construct negative ions surface image, were observed. Diterpenoic acids studied serve the similar mass spectrum but ToF-SIMS coupled with liquid chromatographic separation brings new impact to the positive identification of analytes studied.     

Application of chitosan matrix for delivery of rutin

Chitosan matrices are an alternative material to the food industry, due to its ability to release bioactive compounds through interconnected cavities. Chitosan is a biomaterial of excellence, because it shows unique features, such as biocompatibility, non-toxicity, bactericidal action and the ability to associate with other compounds. Thus, this study aimed the development of chitosan matrices incorporated with rutin, as well as the evaluation of rutin release. Chitosan matrices with rutin were prepared by the coacervation method in alkaline solution and subsequently characterized through FT-IR, TG-DSC, X-ray diffraction, SEM and further submitted to rutin release assay. Results show the effectiveness in the incorporation of rutin into the polymeric matrix. The polymeric matrix with rutin can quickly release it, which provides a wide range of applications, such as carrier of rutin as a micronutrient food additive.     

Natural products and Chagas' disease: a review of plant compounds studied for activity against Trypanosoma cruzi

Here, we review studies that have investigated the activity of plant-derived compounds against Trypanosoma cruzi, the etiologic agent of Chagas’ disease. In the last decade, more than 300 species belonging to almost 100 families have been evaluated for activity, and here we describe the compounds isolated; 85 references are cited.     

Low-energy nuclear reactions with double-solenoid-based radioactive nuclear beam

The University of Notre Dame, USA (Becchetti et al, Nucl. Instrum. Methods Res. A505, 377 (2003) and later the University of São Paulo, Brazil (Lichtenthaler et al, Eur. Phys. J. A25, S-01, 733 (2005)) adopted a system based on superconducting solenoids to produce low-energy radioactive nuclear beams. In these systems the solenoids act as thick lenses to collect, select, and focus the secondary beam into a scattering chamber. Many experiments with radioactive light particle beams (RNB) such as ⁶He, ⁷Be, ⁸Li, ⁸B have been performed at these two facilities. These low-energy RNB have been used to investigate low-energy reactions such as elastic scattering, transfer and breakup, providing useful information on the structure of light nuclei near the drip line and on astrophysics. Total reaction cross-sections, derived from elastic scattering analysis, have also been investigated for light system as a function of energy and the role of breakup of weakly bound or exotic nuclei is discussed.     

Seasonal and biological variations of Epidendrum mosenii: quantification of 24-methylenecycloartanol using gas chromatography

Epidendrum mosenii is a Brazilian medicinal plant, traditionally used to treat infective and dolorous processes. The present article reports a comparative study of the chemical and pharmacological aspects of different parts and seasons of this plant. The results demonstrate that 24-methylenecycloartanol (1), one of the main active principles present in this plant, is located practically in all the parts and during all seasons, but it is much more concentrated in the stems when collected in spring and summer. The pharmacological results indicate that dichloromethane extracts collected in spring and summer were the most active when evaluated against the writhing test in mice, being several times more potent than some reference drugs used as comparison. Together, the results strongly suggest that the antinociceptive effect of E. mosenii is related, at least in part, to the presence of compound 1, and this finding could be useful for quality control of phytopreparations based on this plant.     

Thermal Stability of Biodegradable Films Based on Soy Protein and Corn Starch

Summary: In this paper, films were prepared from soy protein and corn starch in different proportions and thermal stability and kinetic parameters were determined through degradation reactions in an inert atmosphere. Solid residues and decomposition products were identified by infrared spectroscopy. Films from corn starch were less thermally stable than soy protein films. The films containing both components had lower thermal stabilities when compared to those of the pure biopolymers. The mechanism of starch thermal degradation seems to occur in a single step, which can be confirmed by the constant E-values during the thermal degradation reaction. For the pure protein and its mixtures an increase in the activation energy was observed during the reaction. Solid residues for protein at different temperatures showed mainly bands related to CO stretching, angular deformation of N H and C H groups. For starch, absorptions related to free and bound O H, CO stretching of CO₂, CO and carbonyl compounds were observed. For the 50/50 mixture bands related to soy protein and corn starch were observed. The gaseous products for soy protein showed absorptions related to CO₂, CO, CO, NH₃ and C H stretching. For pure starch absorptions related to O H stretching from alcohol, CO from CO₂, CO and carbonyl compounds. The 50/50 mixture had the same characteristics as pure soy protein and corn starch.