Molecular structure,vibrational spectroscopic and chemical reactivity of nematogenic p-n-alkylbenzoic acids: A comparative computational analysis

Molecular structure and vibrational spectroscopic studies of higher homologous series nematogenic p-n-alkylbenzoic acids (nBAC) that have 6 (6BAC) and 7 (7BAC) carbon atoms in the alkyl chain have been investigated using the Density Functional Becke3-Lee-Yang-Parr (B3LYP) level with the basis set 6-31++G (d.p) and Hartree Fock (HF) with the same basis set. The observed vibrational spectra has been resolved and assigned in detail for comparision with both the molecules. These results indicate that DFT and HF values are slightly different at both the levels. A comparision of chemical reactivity such as HOMO (E_H), LUMO (E_L) energies, energy gap (E_g), ionization energy (I), electron affinity (A), electro negativity (χ), chemical hardness (η), electronic chemical potential (μ), electrophilicity index (ω), and softness (S) has been made. It has been observed that the decrement has occurred in the energy band gap value of isolated molecule with increment in alkyl chain length. This provides valuable information regarding enhancing the stability of liquid crystal materials by maintaining the conductivity.     

Study of solar features causing GMSs with 250γ<<Emphasis Type="Italic">H</Emphasis><400γ

The effect of solar features on geospheric conditions leading to geomagnetic storms (GMSs) with planetary index,A ^P ≥ 20 and the range of horizontal component of the Earth’s magnetic fieldH such that 250γ <H < 400γ has been investigated using interplanetary magnetic field (IMF), solar wind plasma (SWP) and solar geophysical data (SGD) during the period 1978–99. Statistically, it is observed that maximum number of GMSs have occurred during the maximum solar activity years of 21st and 22nd solar cycles. A peculiar result has been observed during the years 1982, 1994 when sunspot numbers (SSNs) decrease very rapidly while numbers of GMSs increase. No distinct association between yearly occurrence of disturbed days and SSNs is observed. Maximum number of disturbed days have occurred during spring and rainy seasons showing a seasonal variation of disturbed days. No significant correlation between magnitude (intensity) of GMSs and importance ofH _α , X-ray solar flares has been observed. Maximum number of GMSs is associated with solar flares of lower importance, i.e., SF during the period 1978-93.H _α , X-ray solar flares occurred within lower helio-latitudes, i.e., (0–30)°N to (0–30)°S are associated with GMSs. NoH _α , X-ray solar flares have occurred beyond 40°N or 40°S in association with GMSs. In helio-latitude range (10–40)°N to (10–40)°S, the 89.5% concentration of active prominences and disappearing filaments (APDFs) are associated with GMSs. Maximum number of GMSs are associated with solar flares. Coronal mass ejections (CMEs) are related with eruptive prominences, solar flares, type IV radio burst and they occur at low helio-latitude. It is observed that CMEs related GMS events are not always associated with high speed solar wind streams (HSSWSs). In many individual events, the travel time between the explosion on the Sun and maximum activity lies between 58 and 118 h causing GMSs at the Earth.     

Effect of Pressure on Fluid Damping in MEMS Torsional Resonators with Flow Ranging from Continuum to Molecular Regime

High quality factor of dynamic structures at micro and nano scale is exploited in various applications of micro electro-mechanical systems (MEMS) and nano electro-mechanical system. The quality factor of such devices can be very high in vacuum. However, when vacuum is not desirable or not possible, the tiny structures must vibrate in air or some other gas at pressure levels that may vary from atmospheric to low vacuum. The interaction of the surrounding fluid with the vibrating structure leads to dissipation, thus bringing down the quality factor. Depending on the ambient fluid pressure or the gap between the vibrating and the fixed structure, the fluid motion can range from continuum flow to molecular flow giving a wide range of dissipation. The relevant fluid flow characteristics are determined by the Knudsen number which is the ratio of the mean free path of the gas molecule to the characteristic flow length of the device. This number is very small for continuum flow and reasonably big for molecular flow. In this paper, we study the effect of fluid pressure on the quality factor by carrying out experiments on a MEMS device that consists of a double gimbaled torsional resonator. Such devices are commonly used in optical cross-connects and switches. We only vary fluid pressure to make the Knudsen number go through the entire range of continuum flow, slip flow, transition flow, and molecular flow. We experimentally determine the quality factor of the torsional resonator at different air pressures ranging from 760 Torr to 0.001 Torr. The variation of this pressure over six orders of magnitude ensures required rarefaction to range over all flow conditions. Finally, we get the variation of quality factor with pressure. The result indicates that the quality factor, Q, follows a power law, Q ∝P ^–r , with different values of the exponent r in different flow regimes. In the second part of the paper, we propose the use of effective viscosity for considering velocity slip conditions in solving Navier–Stokes equation numerically. This concept is validated with analytical results for a simple case and then compared with the experimental results presented in this paper. The study shows that the effective viscosity concept can be used effectively even for the molecular regime if the air-gap to length ratio is sufficiently small (h ₀/L<0.01). As this ratio increases, the range of validity decreases.     

Investigating the interface of superhydrophobic surfaces in contact with water

Neutron reflectivity (NR) is used to probe the solid, liquid, vapor interface of a porous superhydrophobic (SH) surface submerged in water. A low-temperature, low-pressure technique was used to prepare a rough, highly porous organosilica aerogel-like film. UV/ozone treatments were used to control the surface coverage of hydrophobic organic ligands on the silica framework, allowing the contact angle with water to be continuously varied over the range of 160 degrees (superhydrophobic) to <10 degrees (hydrophilic). NR shows that the superhydrophobic nature of the surface prevents infiltration of water into the porous film. Atomic force microscopy and density functional theory simulations are used in combination to interpret the NR results and help establish the location, width, and nature of the SH film-water interface.     

A non-catalytic approach to the synthesis of 5,6-dihydrobenzo[h]quinolines

A concise synthesis of highly functionalized 5,6-dihydrobenzo[h]quinoline-3-carbonitriles is delineated through base induced ring transformation of 4-sec-amino-2-oxo-5,6-dihydro-2H-benzo[h]chromene-3-carbonitriles with S-methylisothiourea sulfate and 1-carboxamidinepyrazole hydrochloride, separately, in DMF. Under analogous reaction conditions the ring transformation of 4-sec-amino-2-oxo-5,6-dihydro-2H-benzo[h]chromene-3-carbonitriles by formamidine acetate provided 4-sec-amino-benzo[h]quinoline-3-carbonitriles in moderate yields, while with benzamidine hydrochloride, the reaction followed the same mechanism to yield 2-phenyl-4-sec-amino-5,6-dihydrobenzo[h]quinoline-3-carbonitriles.     

An unusual synthesis of tetrahydrobenzo[f]isoquinolines

A facile and short synthesis of 2-oxo-4-sec-amino-2,3,5,6-tetrahydrobenzo[f]isoquinoline-1-carbonitriles has been delineated through base catalyzed ring transformation of 5,6-dihydro-2-oxo-4-sec-amino-2H-benzo[h]chromene-3-carbonitrile by cyanoacetamide in excellent yields.     

A new macrocyclic polystyrene-based sensor for chromium (III) ions

A new tetradentate dihydrogen perchlorate macrocyclic ligand (2,4,9,11-tetraphenyl-1,5,8,12-tetraazacyclotetradeca-1,4,8,11-tetraene dihydrogen perchlorate) was prepared and characterised. The macrocycle behaves as a selective chelating ion-exchanger for some metal ions. The polystyrene-based membrane electrode is found to exhibit quite promising selectivity for Cr3+ ions. It can be used to estimate chromium concentrations in the range 3.16x 10(-6)-1.00x10(-1) M with a near-Nernstian slope of 17.5 mV per decade of concentration between pH 3.0 to 6.5. The electrode is found to possess a fast response time of 15 s and was used over a period of three months with good reproducibility (s = +/- 0.3 mV). The selectivity coefficient values for mono-, di- and trivalent cations indicate excellent selectivity for Cr3+ ions over a large number of other cations. Anions such as Cl- and SO4(2-) do not interfere and the electrode also works satisfactorily in a mixed organic-water solution. The sensor has been used as an indicator electrode for the potentiometric titration of Cr3+ with EDTA. The practical utility of the membrane sensor has also been demonstrated in solutions contaminated with detergents (CTAB and SDS). Above all, the membrane sensor has been very successfully used to determine Cr3+ in some foods.     

Expedient, stereocontrolled synthesis of (+)-compactin lactone via intramolecular Reformatsky reaction

A concise, stereodefined synthesis of compactin lactone is described. Samarium(II) iodide mediated intramolecular Reformatsky reaction is the key step in the synthesis.     

Oxidation of Fe2+ ions by transfer of energy from γ-irradiated NaCl in aqueous Fricke solution

The oxidation of iron/II/ ions has been studied by dissolving -irradiated NaCl crystals in aqueous Fricke solution. The yield of iron/III/ ions was determined as a function of the amount of NaCl added, storage time, dose, concentration of iron/II/ ions and pH of the Fricke solution. The energy transfer parameter, , which is the ratio of G/Fe³⁺/ obtained by the addition of irradiated NaCl to that by direct radiolysis was evaluated.