Influence of moisture on the viscoelastic relaxations in long aliphatic chain contained semiaromatic polyamide, (PA9‐T) fiber

The effect of moisture on the mechanical relaxation processes of semiaromatic semicrystalline polyamides synthesized by a long‐chain aliphatic diamine and terephthalic acid was investigated by dynamic viscoelastic analysis (DVA) and differential scanning calorimetry (DSC). Moreover, the implication of moisture with the amorphous and crystalline domains was also examined by temperature‐dependent wide‐angle X‐ray diffraction and Fourier transform infrared spectra. The characteristics of the relaxations such as α, β, γ, and the pronounced peak shoulder appeared at 25–100 °C in DVA tan δ curves were found to be strongly susceptible to the presence of moisture. With moisture evaporation, the peak shoulder of 25–100 °C and the β‐relaxation disappeared. The former is anticipated to originate from to the side group motion of hydrogen‐bonded water, whereas the later one is from the motions of the amide–water complex units. With the disappearance of the β‐relaxation, the γ‐relaxation appeared simultaneously in much lower temperatures and ultimately coupled with the δ‐relaxation. The γ‐relaxation is attributed to be associated with the molecular motion of the amide group and δ‐relaxation with for the motion of the methylene units. The existence of two types of water was identified in the polymer, namely, tightly bound and loosely bound. The tightly bound water is believed to be directly connected by hydrogen bonding with the strong polar groups and the loosely bound water weakly links with those connected water making hydrogen bridges. The moisture acts as a plasticizer in the polymer matrix, which causes quite a large depression in its glass transition temperature (T_g). WAXD and FTIR studies corroborated the existence of water solely in amorphous regions, i.e., no rapport of water with the crystalline parts. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2878–2891, 2003     

Reaction kinetics and pathway of hydrothermal decomposition of aspartic acid

The kinetics and pathway of hydrothermal decomposition of aspartic acid were studied using a continuous‐flow tubular reactor. The reaction was carried out in the temperature range of 200–260°C and at a pressure of 20 MPa. Deamination was the primary reaction, indicated by the presence of significant amount of ammonia, fumaric acid, or maleic acid in the products. Other reaction products were pyruvic acid, malic acid, and traces of succinic and lactic acid. Traces of alanine were also detected, showing the possibility of decomposing high‐molecular weight amino acids to obtain simple amino acids such as glycine or alanine. Results on the effect of reaction parameters demonstrated that decomposition of aspartic acid is highly temperature dependent under hydrothermal conditions. For a slight temperature difference of 60°C (from 200 to 260°C), the first‐order reaction rate constants of 0.003 significantly increased to 0.231 s^?1. The activation energy was 144 kJ/mol, as calculated by the Arrhenius equation. No significant effect was exhibited by other reaction parameters such as pH and pressure. The results are useful in controlling the hydrolysis of proteinaceous materials toward high yield of aspartic acid under hydrothermal conditions. © 2007 Wiley Periodicals, Inc. 39: 175–180, 2007     

Postmodification of poly(9‐alkyl‐9H‐carbazole‐2,7‐diyl)s as a route to new main‐chain‐functionalized carbazole polymers

The postmodification of poly[9‐(2‐hexyldecyl)‐9H‐carbazole‐2,7‐diyl] ( P1 ) upon its reaction with N‐bromosuccinimide affords exclusive and full bromination of the 3,6‐positions of the carbazole repeat units to yield poly[3,6‐dibromo‐9‐(2‐hexyldecyl)‐9H‐carbazole‐2,7‐diyl] ( P2 ). Brominated polymer P2 can be used as a precursor for further functionalization at the 3,6‐positions with the desired functional group to afford other useful polymers. Polymer P2 has hence been reacted with copper(I) cyanide to afford poly[3,6‐dicyano‐9‐(2‐hexyldecyl)‐9H‐carbazole‐2,7‐diyl] ( P3 ). Full substitution of the bromide groups with nitrile‐functional groups has been achieved. The preparation and structural characterization of polymers P2 and P3 are presented together with studies on their electronic conjugation and photoluminescence properties. Cyclic voltammetry studies on polymer P3 indicate that the new polymer is easier to reduce (n‐dope) but more difficult to oxidize than its unsubstituted counterpart ( P1 ) as a result of the introduction of the electron‐withdrawing nitrile‐functional groups at the 3,6‐positions on the carbazole repeat units on the polymer chains. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3336–3342, 2006     

Use of spectroscopy of gamma-radiation from the inelastic scattering of reactor fast neutrons for elemental analysis

Gamma-spectra of stainless-steel and soil samples have been measured to study the potentialities of using spectroscopy of γ-radiation from the inelastic scattering of reactor fast neutrons for element analysis of various materials. Contents of iron, chromium, nickel, manganese, silicon and titanium in stainless steel, and those of silicon, iron, aluminium, magnesium, calcium, sodium, titanium, carbon and oxygen in soil have been determined by comparing the spectra of the samples with those of specially prepared mixtures of elements. The distinguishing features, advantages, and limitations of this method are discussed.     

Reductive Amination of Aldehydes and Ketones with Sodium Triacetoxyborohydride. Studies on Direct and Indirect Reductive Amination Procedures(1)

Sodium triacetoxyborohydride is presented as a general reducing agent for the reductive amination of aldehydes and ketones. Procedures for using this mild and selective reagent have been developed for a wide variety of substrates. The scope of the reaction includes aliphatic acyclic and cyclic ketones, aliphatic and aromatic aldehydes, and primary and secondary amines including a variety of weakly basic and nonbasic amines. Limitations include reactions with aromatic and unsaturated ketones and some sterically hindered ketones and amines. 1,2-Dichloroethane (DCE) is the preferred reaction solvent, but reactions can also be carried out in tetrahydrofuran (THF) and occasionally in acetonitrile. Acetic acid may be used as catalyst with ketone reactions, but it is generally not needed with aldehydes. The procedure is carried out effectively in the presence of acid sensitive functional groups such as acetals and ketals; it can also be carried out in the presence of reducible functional groups such as C-C multiple bonds and cyano and nitro groups. Reactions are generally faster in DCE than in THF, and in both solvents, reactions are faster in the presence of AcOH. In comparison with other reductive amination procedures such as NaBH(3)CN/MeOH, borane-pyridine, and catalytic hydrogenation, NaBH(OAc)(3) gave consistently higher yields and fewer side products. In the reductive amination of some aldehydes with primary amines where dialkylation is a problem we adopted a stepwise procedure involving imine formation in MeOH followed by reduction with NaBH(4).     

Synthesis and extraction properties of new chromogenic azo-calix[4]dibenzothiacrown ethers

Two novel chromogenic cone calix[4]dibenzothiacrown ethers 3 and 4 in which nitrophenylazo groups attached at the phenyl ring of dibenzothiacrown unit were described. The extraction properties of 3 and 4 toward different transition metal ions have been studied using conductometric technique and found to exhibit Cu²⁺ and Hg²⁺ selectivity with very high stability constants range from log K _assoc = 5.19 to log K _assoc = 8.72.     

Voltammetric determination of mercury levels in tuna fish

Summary A reliable and rapid procedure for the determination of Hg in fish by differential pulse anodic-stripping voltammetry (DPASV) at the gold electrode has been developed for use in food control and marine ecotoxicology. Potentialities and performance are demonstrated by the investigation of tuna fish. Samples of 0.5–2.5 g are subjected to pressurized digestion with HNO₃/HClO₄ (71). The resulting analyte solution is irradiated in closed flasks with ultraviolet light in presence of H₂O₂ to decompose dissolved organic substances. This is followed by DPASV with two standard additions. The relative standard deviation for the lower g/g range is below 5%. Comparative determination by gas chromatography confirmed that in fish-muscle mercury exists almost completely in the form of toxic organomercurials, i. e. methyl- and dimethylmercury.

---

Voltammetrische Bestimmung von Quecksilber in Thunfischen

Zusammenfassung Für die Lebensmittelkontrolle und marine Ökotoxikologie wurde eine neue spurenanalytische Alternative zur raschen und zuverlässigen Bestimmung des Quecksilbergehaltes in Fisch unter Einsatz der differentiellen Pulsinversvoltammetrie (DPIV) und Verwendung einer Goldscheibenelektrode entwickelt.Möglichkeiten und Leistungsfähigkeit der Methode werden durch die Untersuchung von Thunfisch demonstriert. Proben von 0,5 bis 2,5 g Frischgewicht werden zunächst einem Druckaufschluß mit HNO₃/HClO₄ (71) unterworfen. Die resultierende Analytlösung wird zum Abbau gelöster organischer Substanzen im geschlossenen Gefäß einer UV-Bestrahlung (70° C, 150 W Quecksilberlampe, 4 h) unter oxydierenden Bedingungen (H₂O₂) unterzogen. Anschließend erfolgt die voltammetrische Bestimmung mit DPIV unter Vornahme von zwei Eichzusätzen. Die relative Standardabweichung liegt im unteren mg/kg-Bereich unter 5%. Die Richtigkeit wurde durch Vergleichsbestimmung mit der Gaschromatographie getestet. Die Übereinstimmung der ermittelten Quecksilbergehalte bestätigt, daß im Muskelfleisch von Fisch das Quecksilber nahezu vollständig in toxischen organischen

---

---

Taken in part from the Ph. D. Thesis of R. Ahmed. Presented at the 8th International Microchemical Symposium, Graz, August 25–30, 1980.     

Semirigid GCD domains

Let R be a commutative integral domain. An element x of R is calledrigid if for all r,s dividing x; r divides s or s divides r. In our terminology, R issemirigid if each non zero non unit of R is a finite product of rigid elements. We show that semirigid GCD domains have a type of unique factorization, and are a known generalization of Krull domains.     

An Experimental Design Approach to Quantitative Expression for Quality Control of a Multicomponent Antidiabetic Formulation by the HILIC Method

A rapid and reproducible hydrophilic liquid chromatography (HILIC) process was established for concomitant determination of remogliflozin etabonate (RE), vildagliptin (VD), and metformin (MF) in a formulation. A face-centered central composite experimental design was employed to optimize and predict the chromatographic condition by statistically studying the surface response model and design space with desirability close to one. A HILIC column with a simple mobile phase of acetonitrile (65% v/v) and 20 mM phosphate buffer (35% v/v, pH 6, controlled with orthophosphoric acid) was used to separate RE, VD, and MF. RE, VD, and MF were separated in 3.6 min using an isocratic mode mobile phase flow at a flow rate of 1.4 mL at room temperature, and the analytes were examined by recording the absorption at 210 nm. The developed HILIC method was thoroughly validated for all parameters recommended by ICH, and linearity was observed in the ranges 20–150 µg/mL, 10–75 µg/mL, and 50–750 µg/mL for RE, VD, and MF, respectively, along with excellent regression coefficients (r² > 0.999). The calculated percentage relative deviation and relative error ascertained the precision and accuracy of the method. The selectivity and accuracy were further confirmed by the high percentage recovery of added standard drugs to the formulation using the standard addition technique. The robustness of the HILIC processes was confirmed by developing a half-normal probability plot and Pareto chart, as the slight variation of a single factor had no significant influence on the assay outcomes. Utilization of the optimized HILIC procedure for concurrent quantification of RE, VD, and MF in solid dosage forms showed accurate and reproducible results. Hence, the fast HILIC method can be regularly employed for the quality assurance of pharmaceutical preparations comprising RE, VD, and MF.